Jump to content

  • Log In with Google      Sign In   
  • Create Account

We're offering banner ads on our site from just $5!

1. Details HERE. 2. GDNet+ Subscriptions HERE. 3. Ad upload HERE.


Like
0Likes
Dislike

Developing a GUI Using C++ and DirectX Part 1

By Mason McCuskey of Spin Studios | Published May 17 2000 01:30 PM in DirectX and XNA

mouse directinput position windows data cursor gui relative
If you find this article contains errors or problems rendering it unreadable (missing images or files, mangled code, improper text formatting, etc) please contact the editor so corrections can be made. Thank you for helping us improve this resource

At first glance, it may seem like I’m reinventing the wheel; Windows already comes with a very complex, very functional GUI. Unfortunately, while the Windows GUI is great for office apps, quite frequently, it’s not suited for games. Games tend to want a more precise control over the GUI than Windows can provide (for example, you may want to use alpha-blending to implement partially transparent windows – easy if you’ve written your own GUI, but next to impossible using the Windows GUI).

This article series will walk you though how to create a GUI using C++ and DirectX. The series is divided into several parts, each dealing with a specific aspect of GUI programming. They’re meant to be read in order, so you’ve picked the right article to start with.

I’m making several assumptions about your knowledge. I’m assuming you know the basics of how event-driven programming works (message queues, etc), and I’m assuming you have a strong grasp of PDL (the commenting language – if you don’t know what this is, read Code Complete) and C++. I used C++ to implement my GUI system, because I’m a card-carrying member of the C++ fan club, and because the OOP of C++ works great for implementing window and control types. Note the power of OOP in this solution, and ask yourself if you could do the same thing as easily in C.

Let’s start by defining our scope. It’s important to realize up front that we’re not remaking Windows 95, we’re just trying to get a simple GUI up for a game, so we don’t have to implement every single control and GUI construct. We only need a few parts for this simple GUI: a mouse pointer, a generic window, and some dialog controls to place within that window. We’re also going to need a resource editor, a program that will allow us to design dialogs by graphically dropping controls at various places.


Start With The Basics - The Rendering Loop

I’m going to start at the top, by defining a function that will calculate and draw one frame of our GUI system. Let’s call this function RenderGUI(). In PDL, RenderGUI does something like this:

void CApplication::RenderGUI(void)
{
   // get position and button status of mouse cursor
   // calculate mouse cursor’s effects on windows / send messages
   // render all windows
   // render mouse
   // flip to screen
}

Pretty straightforward for now. Basically, we grab the new position and status of the mouse cursor, calculate any changes that are caused by the new data, render all our windows, render the mouse cursor, then push the whole thing to the screen.


The Mouse

class CMouse { 
public: 
  CMouse(); // boring 
  ~CMouse(); // boring 
  int Init(LPDIRECTINPUT di); // we’ll talk about this later 
  int Refresh(void); // we’ll talk about this later 
  int GetButton(int index) 
  { 
	if (index < 0 || index > NUMMOUSEBUTTONS) return(0); 
	return(m_button[index]); 
  } 
  void clear(void); // sets all vars to zero 

  // makes sure p is a valid on-screen point 
  void ConstrainPosToScreenSize(CPoint &p); 
  CPoint GetAbsPosition(void) { return(m_absposition); } 
  CPoint GetRelPosition(void) { return(m_relposition); } 
  enum { NUMMOUSEBUTTONS = 3 }; // three button mouse 
private: 
  LPDIRECTINPUTDEVICE m_mousedev; 
  char m_button[NUMMOUSEBUTTONS]; // state of buttons 
  CPoint m_absposition; // actual screen position 
  CPoint m_relposition; // relative position 
};

Pretty straightforward class definition. We've got three data pieces, m_button, m_absposition and m_relposition, abstracted by two functions, GetButton, GetAbsPosition(), and GetRelPosition(). Then we've got Init and Refresh functions, which initialize the mouse and Refresh its button and position information. The m_mousedev is an interface to our mouse device; we get this interface during Init(), and use it in Refresh to communicate with DirectInput.


Absolute vs. Relative Position, and DirectInput

Why am I using DirectInput? It's a matter of taste, actually. There are two ways to get mouse data in Windows – from DirectInput (the way I'm about to show), and via a Win32 API function called GetCursorPos(). The primary difference is that DirectInput will give you "relative" mouse information – that is, the cursor's current position relative to its last position – whereas GetCursorPos will give you the absolute screen coordinates. Absolute positioning is great for GUIs; relative positioning is good when the mouse is used without a cursor, i.e., to look around in a FPS game. You can however, calculate relative from absolute, and vice versa.

I used DirectInput. This decision was made for many reasons, all of which are outside the scope of this article (three words: multiple-mice systems). GetCursorPos() may be a better solution for you – if that's the case, it should be easy to flesh out the mouse class. DirectInput is more tricky (and more interesting), so the rest of this article will be in DirectInput.


Initializing DirectInput

Before we go any further with CMouse, let’s look at the code to initialize DirectInput. Note that this code doesn’t belong in our CMouse::Init() routine; the DirectInput pointer is used by the entire game, not just the mouse, so the code that inits DirectInput should go in your main init function – the same time you init DirectDraw, DirectSound, etc. A DirectInput interface pointer is different than a DirectInput device pointer; you use DirectInput pointers to get DirectInputDevice pointers. Make sure you understand this distinction. Here’s the code to initialize the master DirectInput interface pointer:

LPDIRECTINPUT di = NULL; 

hr = DirectInputCreate(hinst, DIRECTINPUT_VERSION, &di, NULL); 
if (FAILED(hr)) { 
  // error
  handle_error ();
  }

// Now that we’ve got a DirectInput interface, let’s begin
// fleshing out our CMouse by implementing CMouse::Init(). 

bool CMouse::Init(LPDIRECTINPUT di) 
{ 
  // Obtain an interface to the system mouse device. 
  hr = di->CreateDevice(GUID_SysMouse, (LPDIRECTINPUTDEVICE*)&m_mousedev, NULL); 

  if (FAILED(hr)) { /* handle errors! */ } 
  //  Set the data format to "mouse format". 
  hr = m_mousedev->SetDataFormat(&c_dfDIMouse); 

  if (FAILED(hr)) { /* handle errors! */ } 
  // Set the cooperativity level 
  hr = m_mousedev->SetCooperativeLevel(hwnd, 
	DISCL_NONEXCLUSIVE | DISCL_FOREGROUND); 

  if (FAILED(hr)) { /* handle errors! */ } 
}

That code does three important things. First, it gets a valid DirectInput mouse device interface, and puts it in di_mouse. Next, it sets the data format and the cooperative level for the device, basically letting windows know that we want to query the device as a mouse, and that we don’t want to take exclusive ownership of it. (Exclusive ownership means that we’re the only app that can use the mouse – by specifying DISCL_NONEXCLUSIVE, we’ve told Windows that we’re going to be sharing the mouse with other applications.)


Polling DirectInput for Mouse Status

Now let’s flesh out CMouse::Refresh(), the function responsible for updating the CMouse’s internal button state and position. Here’s the code:

void CMouse::Refresh(void) 
{ 
  char done = 0; 
  int q; 
  HRESULT hr; 
  CPoint p; 
  DIMOUSESTATE dims; 

  // clear our struct – eventually, directinput will fill this in 
  memset(&dims, 0, sizeof(DIMOUSESTATE)); 
  if (!m_mousedev) return; // we don’t have a pointer! Bail! 

  while (!done) 
  { 
	// query DirectInput for newest mouse data 
	hr = m_mousedev->GetDeviceState(sizeof(DIMOUSESTATE), &dims); 
	if (FAILED(hr)) 
	{ 
  	if (hr == DIERR_INPUTLOST || hr == DIERR_NOTACQUIRED) 
  	{ 
    	// device lost... reacquire 
    	hr = m_mousedev->Acquire(); 
    	if (FAILED(hr)) 
    	{ 
      	// error handling goes here 
      	clear(); 
      	done=1; 
    	} 
  	} 
  	else 
  	{ 
      	// it’s some other error – handle it 
      	clear(); 
      	done = 1; 
  	} 
	} 
	else // read mouse successfully! 
	{ 
  	done = 1; 
	} 
  } // end while loop – we’ve read DI correctly 

  // squirrel away newest rel position data 
  m_relposition.x = dims.lX; 
  m_relposition.y = dims.lY; 
  m_relposition.z = dims.lZ; 
  // now calc abs position from new relative data 
  m_absposition.z += dims.lZ; 
  m_absposition.x += dims.lX; 
  m_absposition.y += dims.lY; 

  // keep the mouse pointer on-screen... 
  ConstrainPosToScreenSize(m_absposition); 
  // get button data 
  for (q=0; q < NUMMOUSEBUTTONS; q++) 
  { 
	m_button[q] = (dims.rgbButtons[q] & 0x80)); 
  } 
}

That code’s doing a lot of things. First, it queries DirectInput for the new absolute mouse position (there’s a while loop in there that will automatically retry the query if we’ve lost the interface). Next, it squirrels the absolute position data away in m_absposition, then it "applies" the relative position to come up with the new absolute position. The ConstrainPosToScreenSize() makes sure the point is within the bounds of the screen. Finally, it loops through and refreshes all the buttons.


Drawing The Mouse

There’s two main philosophies behind drawing the mouse cursor. If you know that your entire screen will be refreshed with new pixel data every frame, you can simply blt the mouse cursor at its new absolute position, and be done with it. A better, solution, however, is to grab a copy of the pixel data under the mouse cursor before you blt it, then, when the mouse moves, you erase your old blt by blting your saved pixel data back. I prefer the second method.

I’m not going to go into the gritty details of blitting surfaces and all that; you should know how to do that.


Threads and Tails

If you don’t mind multithreading, there’s a better way to deal with the mouse than what’s described here. The method here is a one thread method, which polls the mouse every frame. Good for high frame rates, but not so good for low frame rates – the mouse cursor will appear "sluggish." The best way to deal with the mouse is to start a separate "mouse-rendering" thread, which continually monitors WM_MOUSEMOVE messages, and takes care of updating and bltting the mouse cursor each time the mouse is moved. The advantage to multithreading the mouse pointer in this manner is that your mouse will still be fluid regardless of how slow your game’s frame rate is. Having a separate thread for your mouse will make the game feel responsive, regardless of frame rate.

Also, it should be obvious to you by now how to create mouse trails. Keep the last several (five or ten) mouse cursor positions in an array. Whenever the mouse moves, discard the oldest coordinate, move all the other coordinates down one slot, and put the newest coordinate in the top slot. Then, if you want to get extra fancy, use alpha-blitting to render the old coordinates with more transparency than the newer ones.


Stay Tuned..

Whew! Now we’ve got the mouse cursor down. Up next, Part II to learn how to create some basic windows, and move them around. Stay tuned for additional excitement!



About the Author(s)


Mason McCuskey is a programmer for [url="http://www.spin-studios.com/"]Spin Studios[/url] and can be reached for comment at the following address: [email="mason@spin-studios.com"]mason@spin-studios.com[/email]




Comments

Note: Please offer only positive, constructive comments - we are looking to promote a positive atmosphere where collaboration is valued above all else.




PARTNERS