If you find this article contains errors or problems rendering it unreadable (missing images or files, mangled code, improper text formatting, etc) please contact the editor so corrections can be made. Thank you for helping us improve this resource |
NOTICE: This file is included with permission from the author and is part of the PC-GPE collection. This document may not be distributed separately from here.
The entire PC-GPE collection may be downloaded from: ftp://x2ftp.oulu.fi/...gpe/pcgpe10.zip
Disclaimer
I assume no responsibility whatsoever for any effect that this file, the information contained therein or the use thereof has on you, your sanity, computer, spouse, children, pets or anything else related to you or your existence. No warranty is provided nor implied with this information.
Introduction
Bresenham is a pretty smart cookie (note the use of the word "is", last I heard he was still working for IBM). This file contains the algorithms he developed for drawing lines and circles on a pixelated display system such as the VGA.
Line Algorithm
The basic algorithm works for lines which look like this:
where p1 = (x1,y1), p2 = (x2, y2), x and y are both increasing from p1 to p2, deltax = x2 - x1, deltay = y2 - y1 and deltax >= deltay.All other types of lines can be derived from this type. I'll get to this bit later.
First you need to perform the following intialisation:
x = x1 y = y1 d = (2 * deltay) - deltaxx is the current x location, you will add 1 to this variable after every pixel you draw until all pixels have been drawn. y is the current y location. The decision variable is used to determine when to add 1 to this value. d is the decision variable which will be used to keep a track of what to do.
Now you loop across the screen from x1 to x2 and for each loop perform the following operations for each pixel :
PutPixel(x, y); { Draw a pixel at the current point } if d < 0 then d := d + (2 * deltay) else begin d := d + 2 * (deltay - deltax); y := y + 1; end; x := x + 1;It's that simple!
Speeding Up The Line Algorithm
There are several useful techniques for speeding up Bresenham's line algorithm.
For starters, notice that all multiplications are by 2. This can be performed with a simple shift left instruction (Shl in Pascal, << in C).
Next notice that the values you add to the decision variable do not change throughout the loop, so they can be precalculated beforehand.
One property of lines is that they are symmetrical about their mid-points, and we can use this property to speed up the algorithm. Store two x and y values, (xa, ya) and (xb, yb). Have each pair start on either end of the line. For each pass through the loop you draw the pixel at both points, add 1 to xa and subtract one from xb. When d >= 0 add 1 to ya and subtract one from yb. You then only need to loop until xa = xb.
It's also obvious that if the decision variable becomes the same value it was when it was initialized, then the rest of the line is just copies of the line you have already drawn up to that point. You might be able to speed the algorithm up by keeping an array of how y has been modified and then use this array if the line starts repeating itself. If you are using the Intel registers to store all values then you probably wouldn't get much of a speed increase (in fact it could slow it down), but it would probably be useful for thing like linear texture mapping (discussed below). I've never actually tried implementing this technique, and I would like to hear the results if anyone does.
Above all remember that these optimizations will only significantly speed up the line drawing algorithm if the whole thing is done in assembly. A profile of the example program at the end of this file showed that 40% of CPU time was spent in the slow PutPixel routine I was using, the loop mechanics and testing the sign of the decision variable.
Other Uses for the Line Algorithm
A line can be represented by the equation y = mx + c, where m = deltay / deltax. Note that this is a version of the standard linear equation ax + bx + c = 0. There are many algorithms which use this equation.
One good use for the Bresenham line algorithm is for quickly drawing filled concave polygons (eg triangles). You can set up an array of minimum and maximum x values for every horizontal line on the screen. You then use Bresenham's algorithm to loop along each of the polygon's sides, find where it's x value is on every line and adjust the min and max values accordingly. When you've done it for every line you simply loop down the screen drawing horizontal lines between the min and max values for each line.
Another area is in linear texture mapping (see the PC-GPE article on texture mapping). This method involves taking a string of bitmap pixels and stretching them out (or squashing them in) to a line of pixels on the screen. Typically you would draw a vertical line down the screen and use Bresenham's to calculate which bitmap pixel should be drawn at each screen pixel.
Circle Algorithm
Circles have the property of being highly symmetrical, which is handy when it comes to drawing them on a display screen.
Bresenham's circle algorithm calculates the locations of the pixels in the first 45 degrees. It assumes that the circle is centered on the origin. So for every pixel (x,y) it calculates we draw a pixel in each of the 8 octants of the circle :
PutPixel(CenterX + X, Center Y + Y) PutPixel(CenterX + X, Center Y - Y) PutPixel(CenterX - X, Center Y + Y) PutPixel(CenterX - X, Center Y - Y) PutPixel(CenterX + Y, Center Y + X) PutPixel(CenterX + Y, Center Y - X) PutPixel(CenterX - Y, Center Y + X) PutPixel(CenterX - Y, Center Y - X)So let's get into the actual algorithm. Given a radius for the circle we perform this initialization:
d := 3 - (2 * RADIUS) x := 0 y := RADIUSNow for each pixel we do the following operations:
Draw the 8 circle pixels if d < 0 then d := d + (4 * x) + 6 else begin d := d + 4 * (x - y) + 10 y := y - 1; end;And we keep doing this until x = y. Note that the values added to the decision variable in this algorithm (x and y) are constantly changing, so we cannot precalculate them. The multiplications however are by 4, and we can accomplish this by shifting left twice.
A Pascal General Line Procedure
The basic Bresenham line algorithm can be modified to handle all types of lines. In this section assume that deltax = abs(x2 - x1) and deltay = abs(y2 - y1).
First let's take lines where deltax >= deltay. Now if x1 > x2 then you will need to subtract 1 from x for every pass through the loop. Similarly if y1 > y2 then you will be also need to subtract 1 from y for every pass through the loop where d<0.
Lines where deltax < deltay can be handled the same way, you just swap all the deltax's and deltay's around.
The fastest method of handling all cases is to write a custom routine for each of the 8 line types:
1) x1 <= x2, y1 <= y2, deltax >= deltay 2) x1 <= x2, y1 <= y2, deltax < deltay 3) x1 <= x2, y1 > y2, deltax >= deltay 4) x1 <= x2, y1 > y2, deltax < deltay 5) x1 > x2, y1 <= y2, deltax >= deltay 6) x1 > x2, y1 <= y2, deltax < deltay 7) x1 > x2, y1 > y2, deltax >= deltay 8) x1 > x2, y1 > y2, deltax < deltayThis will give you the fastest results, but will also make your code 8 times larger! Alternatively you can declare a few extra variables and use a common inner loop for all lines:
numpixels = number of pixels to draw = deltax if deltax >= deltay or = deltay if deltax < deltay dinc1 = the amount to add to d when d < 0 dinc2 = the amount to add to d when d >= 0 xinc1 = the amount to add to x when d < 0 xinc2 = the amount to add to x when d >= 0 yinc1 = the amount to add to y when d < 0 yinc2 = the amount to add to y when d >= 0The following is a simple example program which uses this technique:
{ BRESLINE.PAS - A general line drawing procedure. By Mark Feldman This is a very simple implementation of Bresenham's' line algorithm with no optimisations. It can draw about 6000 random lines a second in mode 13h on my 486SX33 with sloooooow Paradise Extended VGA. } procedure Line(x1, y1, x2, y2 : integer; color : byte); var i, deltax, deltay, numpixels, d, dinc1, dinc2, x, xinc1, xinc2, y, yinc1, yinc2 : integer; begin { Calculate deltax and deltay for initialisation } deltax := abs(x2 - x1); deltay := abs(y2 - y1); { Initialize all vars based on which is the independent variable } if deltax >= deltay then begin { x is independent variable } numpixels := deltax + 1; d := (2 * deltay) - deltax; dinc1 := deltay Shl 1; dinc2 := (deltay - deltax) shl 1; xinc1 := 1; xinc2 := 1; yinc1 := 0; yinc2 := 1; end else begin { y is independent variable } numpixels := deltay + 1; d := (2 * deltax) - deltay; dinc1 := deltax Shl 1; dinc2 := (deltax - deltay) shl 1; xinc1 := 0; xinc2 := 1; yinc1 := 1; yinc2 := 1; end; { Make sure x and y move in the right directions } if x1 > x2 then begin xinc1 := - xinc1; xinc2 := - xinc2; end; if y1 > y2 then begin yinc1 := - yinc1; yinc2 := - yinc2; end; { Start drawing at } x := x1; y := y1; { Draw the pixels } for i := 1 to numpixels do begin PutPixel(x, y, color); if d < 0 then begin d := d + dinc1; x := x + xinc1; y := y + yinc1; end else begin d := d + dinc2; x := x + xinc2; y := y + yinc2; end; end; end;Note that if you are writing a line routine for mode 13h (for example) you can speed it up by converting the inner loop to assembly and including mode 13h specific code. This portion of the above routine works the same but the values are stored in a single variable (screen) which holds the memory address of the current pixel, screeninc1 and screeninc2 are the update values for screen.
var screen : word; screeninc1, screeninc2 : integer; . . . { Start drawing at } screen := word(y1) * 320 + x1; screeninc1 := yinc1 * 320 + xinc1; screeninc2 := yinc2 * 320 + xinc2; { Draw the pixels } asm { Use as many registers as are available } push $A000 pop es mov di, screen mov dx, d mov al, color mov cx, numpixels mov bx, dinc1 @bres1: { Draw the current pixel and compare the decision variable to 0 } mov es:[di], al cmp dx, 0 jnl @bres2 { D < 0 } add dx, bx { bx = dinc1 } add di, screeninc1 jmp @bres3 @bres2: { D >= 0 } add dx, dinc2 add di, screeninc2 @bres3: loop @bres1 end;