If you find this article contains errors or problems rendering it unreadable (missing images or files, mangled code, improper text formatting, etc) please contact the editor so corrections can be made. Thank you for helping us improve this resource
1.2 A minor correction with the formula of converting from Quat to Axis. The scale is missing a square root. Thanks to Shi for pointing that out.
From version 1.0 - 1.1 The norm of a quaternion should be the square root of the q.q. The mistake was brought to my attention by several kind readers and upon checking the definition of the Euclidean properties for complex numbers, I realize the norm property
|| u+v || <= || u || + || v ||
is violated for the previous definition of the magnitude.
The code in the samples are updated as well.
To me, the term 'Quaternion' sounds out of this world, like some term from quantum theory about dark matter, having dark secret powers. If you, too, are enthralled by this dark power, this article will bring enlightenment (I hope). The article will show you how to do rotations using quaternions, and bring you closer to understanding quaternions (and their powers). If you do spot a mistake please email me at firstname.lastname@example.org. Also if you intend to put this on your site, please send me a mail. I like to know where this ends up.
Why use Quaternions?
To answer the question, let's first discuss some common orientation implementations.
This is by far the simplest method to implement orientation. For each axis, there is a value specifying the rotation around the axis. Therefore, we have 3 variables
x, y, z <-- angle to rotate around global coordinate axis
that vary between 0 and 360 degrees (or 0 - 2pi). They are the roll, pitch, and yaw (or pitch, roll, and yaw - whatever) representation. Orientation is obtained by multiplying the 3 rotation matrices generated from the 3 angles together (in a specific order that you define).
Note: The rotations are specified with respect to the global coordinate axis frame. This means the first rotation does not change the axis of rotation for the second and third rotations. This causes a situation known as gimbal lock, which I will discuss later.
Angle Axis representation
This implementation method is better than the Euler representation as it avoids the gimbal lock problem. The representation consists of a unit vector representing an arbitrary axis of rotation, and another variable (0 - 360) representing the rotation around the vector:
x, y, z <-- unit vector representing arbitrary axis
angle <-- angle to rotate around above axis
Why are these representations bad?
As rotations in the Euler representation are done with respect to the global axis, a rotation in one axis could 'override' a rotation in another, making you lose a degree of freedom. This is gimbal lock.
Say, if the rotation in the Y axis rotates a vector (parallel to the x axis) so that the vector is parallel to the z axis. Then, any rotations in the z axis would have no effect on the vector.
Later, I will show you an example of gimbal lock and how you can use quaternions to overcome it.
Though the angle axis representation does not suffer from gimbal lock, there are problems when you need to interpolate between two rotations. The calculated interpolated orientations may not be smooth, so you will get jerky rotation movements. Euler representation suffers from this problem as well.
Let's get started
Before we begin, let's establish some assumptions I'll be making. I hate the way many articles leave this important section out, causing a great deal of confusion when it comes to the mathematics.
Coordinate System - This article assumes a right hand coordinate system, like OpenGL. If you are using a left handed coordinate system like Direct3D, you may need to transpose the matrices. Note that the Direct3D samples have a quaternion library already, though I recommend you check through their implementation before using it.
Rotation Order - The sequence of rotations in the Euler representation is X, then Y, and then Z. In matrix form:
RotX * RotY * RotZ <-- Very Important
Matrix - Matrices are in column major format, like they are in OpenGL.
Example [ 0 4 8 12 1 5 9 13 2 6 10 14 3 7 11 15 ]
Vectors and Points - Implemented as a 4x1 matrix so applying a transformation is of the order
Rotation Matrix* [ vx vy vz 1 ] <-- 4x1 vector
This does not imply that I prefer OpenGL over Direct3D. It just happened that I learned OpenGL first, and so my quaternion knowledge was gained in OpenGL.
Note: If you specify rotations in another order, certain quaternion functions will be implemented differently, especially those that deal with Euler representation.
What is a Quaternion?
A complex number is an imaginary number that is defined in terms of i, the imaginary number, which is defined such that i * i = -1.
A quaternion is an extension of the complex number. Instead of just i, we have three numbers that are all square roots of -1, denoted by i, j, and k. This means that
* j = -1 k * k = -1
So a quaternion can be represented as
q = w + xi + yj + zk
where w is a real number, and x, y, and z are complex numbers.
Another common representation is
q=[ w,v ]
where v = (x, y, z) is called a "vector" and w is called a "scalar". Although the v is called a vector, don't think of it as a typical 3 dimensional vector. It is a vector in 4D space, which is totally unintuitive to visualize.
Unlike vectors, there are two identity quaternions.
The multiplication identity quaternion is
q= [1,(0, 0, 0)]
So any quaternion multiplied with this identity quaternion will not be changed.
The addition identity quaternion (which we do not use) is
q= [0,(0, 0, 0)]
Using quaternions as orientations
The first thing I want to point out is that quaternions are not vectors, so please don't use your preconceived vector mathematics on what I'm going to show.
This is going to get very mathematical, so please bear with me.
We need to first define the magnitude of a quaternion.
|| q ||= Norm(q) =sqrt(w2 + x2 + y2 + z2)
A unit quaternion has the following property
w2 + x2 + y2 + z2=1
So to normalize a quaternion q, we do
q = q / || q || = q / sqrt(w2 + x2 + y2 + z2)
What is so special about this unit quaternion is that it represents an orientation in 3D space. So you can use a unit quaternion to represent an orientation instead of the two methods discussed previously. To use them as orientations, you will need methods to convert them to other representations (e.g. matrices) and back, which will be discussed soon.
Visualizing a unit quaternion
You can visualize unit quaternions as a rotation in 4D space where the (x,y,z) components form the arbitrary axis and the w forms the angle of rotation. All the unit quaternions form a sphere of unit length in the 4D space. Again, this is not very intuitive but what I'm getting at is that you can get a 180 degree rotation of a quaternion by simply inverting the scalar (w) component.
Note: Only unit quaternions can be used for representing orientations. All discussions from here on will assume unit quaternions.
Conversion from Quaternions
To be able to use quaternions effectively, you will eventually need to convert them to some other representation. You cannot interpret keyboard presses as quaternions, can you? Well, not yet.
Quaternion to Matrix
Since OpenGL and Direct3D allow rotations to be specified as matrices, this is probably the most important conversion function, since homogenous matrices are the standard 3D representations.
The equivalent rotation matrix representing a quaternion is
To change a quaternion to a rotation around an arbitrary axis in 3D space, we do the following:
If the axis of rotation is (ax, ay, az) and the angle is theta (radians) then the angle= 2 * acos(w)
ax= x / scale ay= y / scale az= z / scale
where scale = sqrt (x2 + y2 + z2)
Another variation I have seen is that the scale = sin(acos(w)). They may be equivalent, though I didn't try to find the mathematical relationship behind them.
Anyway if the scale is 0, it means there is no rotation so unless you do something, the axis will be infinite. So whenever the scale is 0, just set the rotation axis to any unit vector with a rotation angle of 0.
A Simple Example
In case you are getting confused with what I'm getting at, I will show you a simple example here.
Say the camera orientation is represented as Euler angles. Then, in the rendering loop, we position the camera using
RotateX * RotateY * RotateZ * Translate
where each component is a 4x4 matrix.
So if we are using a unit quaternion to represent the camera orientation, we have to convert the quaternion to a matrix first
// convert Euler to quaternion // convert quaternion to axis angle glRotate(theta, ax, ay, az) // translate
The above implementations are equivalent. The point I'm trying to get across is that using quaternions for orientation is the same as using Euler or Axis angle representation and that they can be interchanged through the conversion functions I've described.
Note that the above quaternion representation will also incur gimbal lock like the Euler method.
Of course, you do not know how to make the rotation to be a quaternion in the first place but we will get to that shortly.
Note: If you are using Direct3D or OpenGL, you may not have to deal with matrices directly, but matrix concatenation is something that the API does, so it's worth learning about them.
Since a unit quaternion represents an orientation in 3D space, the multiplication of two unit quaternions will result in another unit quaternion that represents the combined rotation. Amazing, but it's true.
Given two unit quaternions
Q1=(w1, x1, y1, z1); Q2=(w2, x2, y2, z2);
A combined rotation of unit two quaternions is achieved by
Q1 * Q2 =( w1.w2 - v1.v2, w1.v2 + w2.v1 + v1*v2)
v1= (x1, y1, z1) v2 = (x2, y2, z2)
and both . and * are the standard vector dot and cross product.
However an optimization can be made by rearranging the terms to produce
Of course, the resultant unit quaternion can be converted to other representations just like the two original unit quaternions. This is the real beauty of quaternions - the multiplication of two unit quaternions in 4D space solves gimbal lock because the unit quaternions lie on a sphere.
Be aware that the order of multiplication is important. Quaternion multiplication is not commutative, meaning
q1 * q2 does not equal q2 * q1
Note: Both quaternions must refer to the same coordinate axis. I made the mistake of combining two quaternions from different coordinate axes, and I had a very hard time wondering why the result quaternion fails in certain angles only.
Conversion To Quaternions
Now we learn how to convert other representations to quaternions. Although I do not use all the conversions in the sample program, there are times when you'll need them when you want to use quaternion orientation for more advanced stuff like inverse kinematics.
Axis Angle to Quaternion
A rotation around an arbitrary axis in 3D space can be converted to a quaternion as follows
If the axis of rotation is (ax, ay, az)- must be a unit vector and the angle is theta (radians)
w = cos(theta/2) x = ax * sin(theta/2) y = ay * sin(theta/2) z = az * sin(theta/2)
The axis must first be normalized. If the axis is a zero vector (meaning there is no rotation), the quaternion should be set to the rotation identity quaternion.
Euler to Quaternion
Converting from Euler angles to a quaternion is slightly more tricky, as the order of operations must be correct. Since you can convert the Euler angles to three independent quaternions by setting the arbitrary axis to the coordinate axes, you can then multiply the three quaternions together to obtain the final quaternion.
So if you have three Euler angles (a, b, c), then you can form three independent quaternions
And the final quaternion is obtained by Qx * Qy * Qz.
Demo - Avoiding Gimbal Lock
Finally, we've reached what you all been waiting for: "How can quaternions avoid gimbal lock.?"
The basic idea is
Use a quaternion to represent the rotation.
Generate a temporary quaternion for the change from the current orientation to the new orientation.
PostMultiply the temp quaternion with the original quaternion. This results in a new orientation that combines both rotations.
Convert the quaternion to a matrix and use matrix multiplication as normal.
Firstly, I want to make a disclaimer regarding the sample code. The code is ugly and very poorly organized. But do remember, this is just a cut down version of my program when I was testing quaternions, and I'm not getting paid for this.
There are two executable samples that I have included. The first program, CameraEuler.exe, is an example for camera implementation using Euler angles.
The main concern should be the Main_Loop function in main.cpp.
The main thing you should take note (in the while loop) is
There are 3 angles I keep track of for rotation in the X, Y, and Z axis.
With every key press, I adjust the corresponding rotation variable.
In the while loop, I translate and then just convert the 3 Euler angles to rotation matrices and multiply them into the final transformation matrix.
Use the up/down keys to rotate around the X axis, left/right to rotate around the Y axis and Insert/PageUp to rotate around the Z axis.
This program suffers from gimbal lock. If you want to see it in action, rotate the camera so that the yaw is 90 deg. Then try rotating in the X and Z direction. See what happens.
Now for the quaternion solution. The program is CameraQuat.exe and it is a slight modification of the previous program.
The main point you should take note (in the while loop) is
The orientation of the camera is a quaternion.
There are 3 angles corresponding to the keypress. Note the angles are meant to be an on/off switch (not accumulative). I reset them inside the while loop. Of course this is not the best way to do it but as I said, it is a quick job.
I convert the 3 angles to a temporary quaternion.
I multiply the temporary quaternion to the camera quaternion to obtain the combined orientation. Note the order of multiplication.
The camera rotation is then converted to the Axis Angle representation for transforming the final matrix.
When a key is pressed, I generate a temporary quaternion corresponding to the key for a small rotation in that particular axis. I then multiply the temporary quaternion into the camera quaternion. This concatenation of rotations in 4D space will avoid gimbal lock. Try it and see for yourself.
The camera quaternion has to be changed into either a matrix form or equivalence form so that you can concatenate it into a final transformation matrix. You have to do this for every quaternion you use, as 4D space and 3D space just don't mix. In the case of OpenGL, I just changed the quaternion to an Axis Angle representation and let the API do the rest.
Although I did not use the global Euler angles for rotations in the second program, I have left them there as a guide for you to see the similar Euler rotations in the first program. Note the Euler angles will be incorrect if you rotate more than 1 axis (because it counts the keypress rather than getting the Euler angles from the camera quaternion). It is just a reference for you to see that when you rotate the yaw to 90 deg when the program starts, the gimbal lock problem is no more.
Note: I don't recommend you use my math library as it is. Understand the quaternion and write your own. For your information, I am going to throw all of that away and rewrite it too. It is just too messy and ugly for my taste.
What I did not show
If you notice, I did not show how to convert from a Quaternion to the Euler angle. That's because I have yet to find a conversion that works perfectly. The only way I know is to obtain a matrix from the quaternion and try to extract the Euler angles from the matrix. However, as Euler to matrix conversions are a many-to-one relationship (due to sin and cos), I do not know how to get the reverse even using atan2. If anyone knows how to extract Euler angles from a matrix accurately, please do share with me.
The other thing I did not show is the conversion of a matrix to a quaternion. I didn't think I needed this conversion as you can convert the Euler and Axis angle representation to quaternion straight without needing to throw them to a matrix.
More you can do - SLERP
If you think you are a quaternion master, think again. There is still more to learn about them. Remember I said something about why the Axis Angle representation is bad? Does the word 'interpolation' ring a bell?
I don't have the time to write about interpolations using quaternions. This article has taken much longer than I had anticipated. I can give you the basic idea about SLERP (Spherical Linear Interpolation), which is basically generating a series of quaternions between two quaternion orientations (which you specify). The series of quaternions will result in smooth motion between the first and end quaternion (something which both the Euler and Axis Angle representation cannot achieve consistently).
I hope this article can clear up any mystery behind the quaternion theory. A final word of caution again:
Don't multiply two quaternions from different coordinate frames. Nothing but pain and hair loss will result from it.
With your new found powers, I bid thee farewell. Take care, .. and watch your back.