• 10/29/14 03:44 AM
    Sign in to follow this  

    Building a 3D MMO using Websockets

    Networking and Multiplayer

    Nikke
    • Posted By Nikke
    Author's note: This article does not aim to build huge MMO's like World of Warcraft or similar. These games have millions of players and gigantic budgets, and employ many skilled engineers to keep servers from falling apart. Do not start one of these on your own. The techniques described in this article however allow you to build moderately-sized MMO's that can potentially hold hundreds of players on a single server, depending on your hardware and packet size. Hi there! My name is Nick Janssen, creator of Ironbane, a 3D MMO that uses WebGL and WebSockets. With this article I would like to give you a better insight in MMO's and make you less afraid of the complexities involved in building one. From my experience I have found that people consider them very hard, while they are in fact quite easy to make using the web technologies of today.

    An MMO? You can't do that!

    MMO's are cool. Yet they are considered one of the hardest things to make when it comes to developing software. I believe MMO's are mainly intimidating to people because of historical reasons. In the old days, network programming used to be very hard. Complex socket calls were everywhere, multithreading was necessary and JSON was still unknown. A lot has changed since then with the coming of Node.js, its event loop and easy to use socket libraries. In addition, writing a 3D game was a challenge on its own. You had to include the right libraries, install dependencies on the client, and write complicated engine calls to do trivial things such as creating a texture. Getting a triangle to show on the screen was already quite an accomplishment. Creating a texture with DirectX10 D3DX10_IMAGE_LOAD_INFO loadInfo; ZeroMemory( &loadInfo, sizeof(D3DX10_IMAGE_LOAD_INFO) ); loadInfo.BindFlags = D3D10_BIND_SHADER_RESOURCE; ID3D10Resource *pTexture = NULL; D3DX10CreateTextureFromFile( pDevice, "crate.gif", &loadInfo, NULL, &pTexture, NULL ); Creating a texture with Three.JS var texture = THREE.ImageUtils.loadTexture('crate.gif'),

    The beginnings

    For our MMO Ironbane I took things one at a time, and it worked out very well. Remember, Rome wasn't built in a day. But with today's technology you can achieve things at a much faster pace than what was ever possible before. I started from a three.js terrain demo and modified it step by step. Within a few days, I had a plane running around with a texture that looked like the pixelated back of a guy. is1.png The next step was to make the player connect to a centralized server. Using Socket.IO I set up a very simple Node.js backend that responds to player connections, and puts them in a global unitList managed by a service called worldHandler: io.sockets.on("connection", function (socket) { socket.unit = null; socket.on("connectServer", function (data, reply) { var unit = new IB.Player(data); worldHandler.addUnit(unit); } });

    Telling players about other players nearby

    To let players know which other players are nearby, the server has to know at any time which players can see other players. To do so, every player instance on the server makes use of an otherUnits array. This array is simply filled with instances of other entities which are currently in the vicinity. When a new player is added to the worldHandler, their otherUnits list gets updated depending on where they are in the world. Later, when they move around, this list is evaluated again, and any changes to this list are sent to the client in the form of addUnit and removeUnit socket events. Now, I would like to point out that the first letter of MMO stands for Massive. For massive games, every player should not know about every other player because it will melt your server.

    Spatial partioning

    To remedy this, you need spatial partioning. In a nutshell, this means that you divide your world into a grid. To visualize it, think of it as the server making use of a Snap To Grid option, to "snap" the position of the players to an imaginary grid. The positions of the players are not altered, rather the server just calculates what the new snapped position of the player would be. 8WyeWxR.png Image courtesy of Gameprogrammingpatterns.com With many players spanning over many different positions, some will have the same "snapped" position. A player then, should only know about all players that are snapped in the same position and all players that are just one cell away from them. You can easily convert between grid and world positions using these functions: function worldToGridCoordinates(x, y, gridsize) { if ( gridsize % 2 != 0 ) console.error("gridsize not dividable by 2!"); var gridHalf = gridsize / 2; x = Math.floor((x + gridHalf)/gridsize); y = Math.floor((y + gridHalf)/gridsize); return { x: x, y: y }; } function gridToWorldCoordinates(x, y, gridsize) { if ( gridsize % 2 != 0 ) console.error("gridsize not dividable by 2!"); x = (x * gridsize); y = (y * gridsize); return { x: x, y: y }; } When a new player is created on the server, they automatically add themselves to a multidimensional array of units on the worldHandler, using the grid position. In Ironbane we even use an additional zone index, since most MMO's have multiple areas where players can reside. worldHandler.world[this.zone][this.cellX][this.cellY].units.push(this);

    Updating the list of players nearby

    Once they are added to the list of units on the server, the next step is calculate which other players are nearby. // We have two lists // There is a list of units we currently have, and a list that we will have once we recalculate // If an item is in the first list, but no longer in the second list, do removeOtherUnit // If an item is in the first & second list, don't do anything // If an item is only in the last list, do addOtherUnit var firstList = this.otherUnits; var secondList = []; // Check for all players that are nearby and add them to secondList var gridPosition = worldToGridPosition(this.x, this.y, 50) var cx = gridPosition.x; var cy = gridPosition.y; for (var x = cx - 1; x <= cx + 1; x++) { for (var y = cy - 1; y <= cy + 1; y++) { _.each(worldHandler.units[this.zone][x][y], function(unit) { if (unit !== this) { secondList.push(unit); } }, this); } } for (var i = 0; i < firstList.length; i++) { if (secondList.indexOf(firstList) === -1) { // Not found in the second list, so remove it this.removeOtherUnit(firstList); } } for (var i = 0; i < secondList.length; i++) { if (firstList.indexOf(secondList) === -1) { // Not found in the first list, so add it this.addOtherUnit(secondList); } } Here, addOtherUnit() adds that player to their otherUnits array, and sends a packet to the client informing a new player has entered in their vicinity. This packet will contain the initial position, velocity, name and other metadata which only needs to be sent once. removeOtherUnit() simply removes the player from their array, and tells the client to destroy that player. var packet = { id: id, position: unit.position, name: unit.name, isGameMaster: true }; this.socket.emit("addUnit", packet);

    Sending packets to the players

    Now, we have the beating heart of an MMO. The final step is to inform the players on a regular basis the positions of the other players in their vicinity. We do this step only twice per second, because we do not want to overload the server. _.each(this.world, function(zone) { _.each(zone, function(cellX) { _.each(cellX, function(cellY) { _.each(cellY.units, function(unit) { var snapshot = []; _.each(unit.otherUnits, function(otherUnit) { var packet = { id:otherUnit.id, x:otherUnit.x, y:otherUnit.y }; snapshot.push(packet); )); if ( snapshot.length ) { unit.socket.emit("snapshot", snapshot); } )); }); }); });

    Conclusion

    That's really all there is to building an MMO. The only things left to do now are building the features that are unique to your game, fine-tuning and security. I hope I have given you fresh insights into MMO programming, and above all the courage to start working on them. At Ironbane we are surely looking for collaborators! You can find the full source code of Ironbane straight on GitHub, and you should be able to install it on your machine with ease.


      Report Article
    Sign in to follow this  


    User Feedback

    Create an account or sign in to leave a review

    You need to be a member in order to leave a review

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now


    whiplash

    Report ·

      

    Share this review


    Link to review
    Mussi

    Report ·

      

    Share this review


    Link to review
    NinjaClot

    Report ·

      

    Share this review


    Link to review
    rcparts

    Report ·

      

    Share this review


    Link to review
    capnnemo

    Report ·

      

    Share this review


    Link to review
    aregee

    Report ·

      

    Share this review


    Link to review
    Ectara

    Report ·

      

    Share this review


    Link to review
    Erebel

    Report ·

      

    Share this review


    Link to review
    Xenosuki

    Report ·

      

    Share this review


    Link to review
    jbadams

    Report ·

      

    Share this review


    Link to review
    tutomso

    Report ·

      

    Share this review


    Link to review
    mousetail

    Report ·

      

    Share this review


    Link to review