Jump to content
  • Advertisement
Sign in to follow this  

SDL Fullscreen causes KDE to reboot

This topic is 4524 days old which is more than the 365 day threshold we allow for new replies. Please post a new topic.

If you intended to correct an error in the post then please contact us.

Recommended Posts

Weirdest error... I ran an old app I wrote awhile ago on a laptop I just purchased. This app is a very simple 3D OpenGL/SDL app which draws some spheres. Now on my laptop when I run the app then switch to fullscreen KDE simply reboots and I end up back at the KDM login screen... Not sure if this is SDL/GL/Linux/Widescreen Laptop related, so I decided to post here.

Share this post


Link to post
Share on other sites
Advertisement
Here is my LOG.
I moved the existing log, caused the error. KDE closes and puts me back at KDM login screen. I logged back in and checked the new log, that is what I pasted here. Another thing to note, when I cause this error I can no longer switch to another tty, like CTRL+ALT+1-6 all bring up console terminals but the graphics are MESSED, just some colored lines... Before I cause this error to occur its all good.

One more thing to note, is it doesn't HAVE TO BE FULLSCREEN. I have just simply MOVE the SDL window and KDE goes down... Before I move the window the app works fine heh.


This is a pre-release version of the The X.Org Foundation X11.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the The X.Org Foundation "monolithic tree" CVS
repository hosted at http://www.freedesktop.org/Software/xorg/
X Window System Version 6.8.99.900 (6.9.0 RC 0)
Release Date: 01 August 2005 + cvs
X Protocol Version 11, Revision 0, Release 6.8.99.900
Build Operating System: Linux 2.6.12-12mdksmp i686 [ELF]
Current Operating System: Linux eden 2.6.12-12mdk #1 Fri Sep 9 18:15:22 CEST 2005 i686
Build Date: 16 September 2005
Before reporting problems, check http://wiki.X.Org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Dec 30 12:17:27 2005
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "layout1"
(**) |-->Screen "screen1" (0)
(**) | |-->Monitor "monitor1"
(**) | |-->Device "device1"
(**) |-->Input Device "Keyboard1"
(**) Option "XkbModel" "pc105"
(**) XKB: model: "pc105"
(**) Option "XkbLayout" "us"
(**) XKB: layout: "us"
(**) Option "XkbOptions" "compose:rwin"
(**) XKB: options: "compose:rwin"
(==) Keyboard: CustomKeycode disabled
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "SynapticsMouse1"
(**) FontPath set to "unix/:-1"
(==) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(**) Option "AllowMouseOpenFail"
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.2
X.Org Video Driver: 0.7
X.Org XInput driver : 0.4
X.Org Server Extension : 0.2
X.Org Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.so
(II) Module bitmap: vendor="X.Org Foundation"
compiled for 6.8.99.900, module version = 1.0.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 6.8.99.900, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
Using vt 8
(--) using VT number 8

(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1039,0760 card 0000,0000 rev 03 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 1039,0002 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:02:0: chip 1039,0963 card 0000,0000 rev 25 class 06,01,00 hdr 80
(II) PCI: 00:02:1: chip 1039,0016 card 0000,0000 rev 00 class 0c,05,00 hdr 00
(II) PCI: 00:02:5: chip 1039,5513 card 1025,0083 rev 00 class 01,01,80 hdr 00
(II) PCI: 00:02:6: chip 1039,7013 card 1025,0083 rev a0 class 07,03,00 hdr 00
(II) PCI: 00:02:7: chip 1039,7012 card 1025,0083 rev a0 class 04,01,00 hdr 00
(II) PCI: 00:03:0: chip 1039,7001 card 1025,0083 rev 0f class 0c,03,10 hdr 80
(II) PCI: 00:03:1: chip 1039,7001 card 1025,0083 rev 0f class 0c,03,10 hdr 00
(II) PCI: 00:03:2: chip 1039,7002 card 1025,0083 rev 00 class 0c,03,20 hdr 00
(II) PCI: 00:04:0: chip 1039,0900 card 1025,0083 rev 91 class 02,00,00 hdr 00
(II) PCI: 00:06:0: chip 104c,ac50 card 4000,0000 rev 02 class 06,07,00 hdr 02
(II) PCI: 00:0b:0: chip 14e4,4318 card 1468,0312 rev 02 class 02,80,00 hdr 00
(II) PCI: 00:18:0: chip 1022,1100 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:1: chip 1022,1101 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:2: chip 1022,1102 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:3: chip 1022,1103 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 01:00:0: chip 1039,6330 card 1025,0083 rev 00 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,2), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000c (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX
[1] -1 0 0x0000a400 - 0x0000a4ff (0x100) IX
[2] -1 0 0x0000a800 - 0x0000a8ff (0x100) IX
[3] -1 0 0x0000ac00 - 0x0000acff (0x100) IX
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xe2100000 - 0xe21fffff (0x100000) MX
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xe8000000 - 0xefffffff (0x8000000) MX
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:2:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) PCI-to-CardBus bridge:
(II) Bus 2: bridge is at (0:6:0), (0,2,5), BCTRL: 0x05c0 (VGA_EN is cleared)
(II) Bus 2 I/O range:
[0] -1 0 0x00004000 - 0x000040ff (0x100) IX
[1] -1 0 0x00004400 - 0x000044ff (0x100) IX
(II) Bus 2 non-prefetchable memory range:
[0] -1 0 0x20800000 - 0x20bfffff (0x400000) MX
(II) Bus 2 prefetchable memory range:
[0] -1 0 0x20400000 - 0x207fffff (0x400000) MX
(--) PCI:*(1:0:0) Silicon Integrated Systems [SiS] 661/741/760 PCI/AGP VGA Display Adapter rev 0, Mem @ 0xe8000000/27, 0xe2100000/17, I/O @ 0xa000/7
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX
(II) OS-reported resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX(B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MXE(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX
(II) PCI Memory resource overlap reduced 0xe0000000 from 0xe1ffffff to 0xdfffffff
(II) Active PCI resource ranges:
[0] -1 0 0xe2000000 - 0xe2001fff (0x2000) MX
[1] -1 0 0xe2005000 - 0xe2005fff (0x1000) MX
[2] -1 0 0xe2004000 - 0xe2004fff (0x1000) MX
[3] -1 0 0xe2003000 - 0xe2003fff (0x1000) MX
[4] -1 0 0xe2002000 - 0xe2002fff (0x1000) MX
[5] -1 0 0xe0000000 - 0xdfffffff (0x0) MXO
[6] -1 0 0xe2100000 - 0xe211ffff (0x20000) MX(B)
[7] -1 0 0xe8000000 - 0xefffffff (0x8000000) MX(B)
[8] -1 0 0x00001800 - 0x000018ff (0x100) IX
[9] -1 0 0x00001c80 - 0x00001cff (0x80) IX
[10] -1 0 0x00001400 - 0x000014ff (0x100) IX
[11] -1 0 0x00001c00 - 0x00001c7f (0x80) IX
[12] -1 0 0x00001000 - 0x000010ff (0x100) IX
[13] -1 0 0x00002000 - 0x0000200f (0x10) IX
[14] -1 0 0x00008100 - 0x0000811f (0x20) IX
[15] -1 0 0x0000a000 - 0x0000a07f (0x80) IX(B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xe2000000 - 0xe2001fff (0x2000) MX
[1] -1 0 0xe2005000 - 0xe2005fff (0x1000) MX
[2] -1 0 0xe2004000 - 0xe2004fff (0x1000) MX
[3] -1 0 0xe2003000 - 0xe2003fff (0x1000) MX
[4] -1 0 0xe2002000 - 0xe2002fff (0x1000) MX
[5] -1 0 0xe0000000 - 0xdfffffff (0x0) MXO
[6] -1 0 0xe2100000 - 0xe211ffff (0x20000) MX(B)
[7] -1 0 0xe8000000 - 0xefffffff (0x8000000) MX(B)
[8] -1 0 0x00001800 - 0x000018ff (0x100) IX
[9] -1 0 0x00001c80 - 0x00001cff (0x80) IX
[10] -1 0 0x00001400 - 0x000014ff (0x100) IX
[11] -1 0 0x00001c00 - 0x00001c7f (0x80) IX
[12] -1 0 0x00001000 - 0x000010ff (0x100) IX
[13] -1 0 0x00002000 - 0x0000200f (0x10) IX
[14] -1 0 0x00008100 - 0x0000811f (0x20) IX
[15] -1 0 0x0000a000 - 0x0000a07f (0x80) IX(B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX(B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MXE(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX
(II) All system resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX(B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MXE(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX
[5] -1 0 0xe2000000 - 0xe2001fff (0x2000) MX
[6] -1 0 0xe2005000 - 0xe2005fff (0x1000) MX
[7] -1 0 0xe2004000 - 0xe2004fff (0x1000) MX
[8] -1 0 0xe2003000 - 0xe2003fff (0x1000) MX
[9] -1 0 0xe2002000 - 0xe2002fff (0x1000) MX
[10] -1 0 0xe0000000 - 0xdfffffff (0x0) MXO
[11] -1 0 0xe2100000 - 0xe211ffff (0x20000) MX(B)
[12] -1 0 0xe8000000 - 0xefffffff (0x8000000) MX(B)
[13] -1 0 0x0000ffff - 0x0000ffff (0x1) IX
[14] -1 0 0x00000000 - 0x000000ff (0x100) IX
[15] -1 0 0x00001800 - 0x000018ff (0x100) IX
[16] -1 0 0x00001c80 - 0x00001cff (0x80) IX
[17] -1 0 0x00001400 - 0x000014ff (0x100) IX
[18] -1 0 0x00001c00 - 0x00001c7f (0x80) IX
[19] -1 0 0x00001000 - 0x000010ff (0x100) IX
[20] -1 0 0x00002000 - 0x0000200f (0x10) IX
[21] -1 0 0x00008100 - 0x0000811f (0x20) IX
[22] -1 0 0x0000a000 - 0x0000a07f (0x80) IX(B)
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 6.8.99.900, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "v4l"
(II) Loading /usr/X11R6/lib/modules/drivers/v4l_drv.so
(II) Module v4l: vendor="X.Org Foundation"
compiled for 6.8.99.900, module version = 0.0.1
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 6.8.99.900, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.so
(II) Module type1: vendor="X.Org Foundation"
compiled for 6.8.99.900, module version = 1.0.2
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 6.8.99.900, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "synaptics"
(II) Loading /usr/X11R6/lib/modules/input/synaptics_drv.o
(II) Module synaptics: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.3
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 6.8.99.900, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.so
(II) Module GLcore: vendor="X.Org Foundation"
compiled for 6.8.99.900, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension GLX
(II) LoadModule: "sis"
(II) Loading /usr/X11R6/lib/modules/drivers/sis_drv.so
(II) Module sis: vendor="X.Org Foundation"
compiled for 6.8.99.900, module version = 0.8.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "keyboard"
(II) Loading /usr/X11R6/lib/modules/input/keyboard_drv.so
(II) Module keyboard: vendor="X.Org Foundation"
compiled for 6.8.99.900, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.4
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 6.8.99.900, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.4
(II) LoadModule: "synaptics"
(II) Reloading /usr/X11R6/lib/modules/input/synaptics_drv.o
(II) v4l driver for Video4Linux
(II) SIS: driver for SiS chipsets: SIS5597/5598, SIS530/620,
SIS6326/AGP/DVD, SIS300/305, SIS630/730, SIS540, SIS315, SIS315H,
SIS315PRO/E, SIS550, SIS650/M650/651/740, SIS330(Xabre),
SIS660/[M]661[F|M]X/[M]670/[M]741[GX]/[M]760[GX]/[M]761[GX]/[M]770[GX],
SIS340
(II) SIS: driver for XGI chipsets: Volari Z7 (XG20),
Volari V3XT/V5/V8/Duo (XG40)
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset SIS660/[M]661[F|M]X/[M]670/[M]741[GX]/[M]760[GX]/[M]761[GX]/[M]770[GX] found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX(B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MXE(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX
[5] -1 0 0xe2000000 - 0xe2001fff (0x2000) MX
[6] -1 0 0xe2005000 - 0xe2005fff (0x1000) MX
[7] -1 0 0xe2004000 - 0xe2004fff (0x1000) MX
[8] -1 0 0xe2003000 - 0xe2003fff (0x1000) MX
[9] -1 0 0xe2002000 - 0xe2002fff (0x1000) MX
[10] -1 0 0xe0000000 - 0xdfffffff (0x0) MXO
[11] -1 0 0xe2100000 - 0xe211ffff (0x20000) MX(B)
[12] -1 0 0xe8000000 - 0xefffffff (0x8000000) MX(B)
[13] -1 0 0x0000ffff - 0x0000ffff (0x1) IX
[14] -1 0 0x00000000 - 0x000000ff (0x100) IX
[15] -1 0 0x00001800 - 0x000018ff (0x100) IX
[16] -1 0 0x00001c80 - 0x00001cff (0x80) IX
[17] -1 0 0x00001400 - 0x000014ff (0x100) IX
[18] -1 0 0x00001c00 - 0x00001c7f (0x80) IX
[19] -1 0 0x00001000 - 0x000010ff (0x100) IX
[20] -1 0 0x00002000 - 0x0000200f (0x10) IX
[21] -1 0 0x00008100 - 0x0000811f (0x20) IX
[22] -1 0 0x0000a000 - 0x0000a07f (0x80) IX(B)
(II) resource ranges after probing:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX(B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MXE(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX
[5] -1 0 0xe2000000 - 0xe2001fff (0x2000) MX
[6] -1 0 0xe2005000 - 0xe2005fff (0x1000) MX
[7] -1 0 0xe2004000 - 0xe2004fff (0x1000) MX
[8] -1 0 0xe2003000 - 0xe2003fff (0x1000) MX
[9] -1 0 0xe2002000 - 0xe2002fff (0x1000) MX
[10] -1 0 0xe0000000 - 0xdfffffff (0x0) MXO
[11] -1 0 0xe2100000 - 0xe211ffff (0x20000) MX(B)
[12] -1 0 0xe8000000 - 0xefffffff (0x8000000) MX(B)
[13] 0 0 0x000a0000 - 0x000affff (0x10000) MS
[14] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS
[15] 0 0 0x000b8000 - 0x000bffff (0x8000) MS
[16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX
[17] -1 0 0x00000000 - 0x000000ff (0x100) IX
[18] -1 0 0x00001800 - 0x000018ff (0x100) IX
[19] -1 0 0x00001c80 - 0x00001cff (0x80) IX
[20] -1 0 0x00001400 - 0x000014ff (0x100) IX
[21] -1 0 0x00001c00 - 0x00001c7f (0x80) IX
[22] -1 0 0x00001000 - 0x000010ff (0x100) IX
[23] -1 0 0x00002000 - 0x0000200f (0x10) IX
[24] -1 0 0x00008100 - 0x0000811f (0x20) IX
[25] -1 0 0x0000a000 - 0x0000a07f (0x80) IX(B)
[26] 0 0 0x000003b0 - 0x000003bb (0xc) IS
[27] 0 0 0x000003c0 - 0x000003df (0x20) IS
(II) Setting vga for screen 0.
(II) SIS(0): SiS driver (2005/09/06-1, compiled for X.org 6.8.99.900)
(II) SIS(0): Copyright (C) 2001-2005 Thomas Winischhofer <thomas@winischhofer.net> and others
(II) SIS(0): *** See http://www.winischhofer.at/linuxsisvga.shtml
(II) SIS(0): *** for documentation and updates.
(--) SIS(0): sisfb not found
(--) SIS(0): Relocated I/O registers at 0xA000
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.so
(II) Module ramdac: vendor="X.Org Foundation"
compiled for 6.8.99.900, module version = 0.1.0
ABI class: X.Org Video Driver, version 0.7
(**) SIS(0): Depth 24, (--) framebuffer bpp 32
(==) SIS(0): RGB weight 888
(==) SIS(0): Default visual is TrueColor
(--) SIS(0): Video BIOS version "2.27.g7" found (new SiS data layout)
(==) SIS(0): Using XAA acceleration architecture
(==) SIS(0): Using HW cursor
(==) SIS(0): Color HW cursor is enabled
(II) SIS(0): Using VRAM command queue, size 512k
(==) SIS(0): Hotkey display switching is enabled
(II) SIS(0): WARNING: Using the Hotkey might freeze your machine, regardless
(II) SIS(0): whether enabled or disabled. This is no driver bug.
(==) SIS(0): SiSCtrl utility interface is disabled
(II) SIS(0): For information on SiSCtrl, see
http://www.winischhofer.at/linuxsispart1.shtml#sisctrl
(==) SIS(0): DRI disabled
(--) SIS(0): 65536K shared video RAM (UMA)
(--) SIS(0): DRAM type: DDR SDRAM
(--) SIS(0): Memory clock: 198.861 MHz
(--) SIS(0): DRAM bus width: 64 bit
(--) SIS(0): Linear framebuffer at 0xE8000000
(--) SIS(0): MMIO registers at 0xE2100000 (size 64K)
(--) SIS(0): VideoRAM: 65536 KB
(II) SIS(0): Using 64960K of framebuffer memory at offset 0K
(--) SIS(0): Hardware supports two video overlays
(II) SIS(0):
Dear SiS76x user, your machine is using a shared memory framebuffer.
Due to hardware limitations of the SiS chip in combination with the
AMD CPU, video overlay support is very limited on this machine. If you
experience flashing lines in the video and/or the graphics display
during video playback, reduce the color depth and/or the resolution
and/or the refresh rate. Alternatively, use the video blitter.
(--) SIS(0): Detected SiS302LV video bridge (Charter/UMC-1, ID 1; Rev 0xe1)
(--) SIS(0): No CRT1/VGA detected
(--) SIS(0): Detected LCD/plasma panel (1280x800, 6, non-exp., RGB18 [6cc106])
(==) SIS(0): Using gamma correction (1.0, 1.0, 1.0)
(II) SIS(0): CRT1 gamma correction is enabled
(II) SIS(0): Separate Xv gamma correction for CRT1 is disabled
(II) SIS(0): CRT2 gamma correction is enabled
(--) SIS(0): Memory bandwidth at 32 bpp is 397.722 MHz
(--) SIS(0): Detected LCD PanelDelayCompensation 0x04 (for LCD=CRT2)
(--) SIS(0): 302LV/302ELV: Using EMI 0x600d703f (LCD)
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.so
(II) Module ddc: vendor="X.Org Foundation"
compiled for 6.8.99.900, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
(--) SIS(0): CRT2 DDC probing failed
(==) SIS(0): Min pixel clock is 10 MHz
(--) SIS(0): Max pixel clock is 290 MHz
(II) SIS(0): Replaced entire mode list with built-in modes
(II) SIS(0): Correcting bogus CRT2 monitor HSync range
(II) SIS(0): Correcting bogus CRT2 monitor VRefresh range
(II) SIS(0): "Unknown reason" in the following list means that the mode
(II) SIS(0): is not supported on the chipset/bridge/current output device.
(II) SIS(0): monitor1: Using hsync range of 30.00-80.00 kHz
(II) SIS(0): monitor1: Using vrefresh range of 59.00-61.00 Hz
(II) SIS(0): monitor1: Using vrefresh value of 71.00 Hz
(II) SIS(0): Clock range: 10.00 to 290.64 MHz
(II) SIS(0): Not using default mode "800x600" (vrefresh out of range)
(II) SIS(0): Not using default mode "800x600" (vrefresh out of range)
(II) SIS(0): Not using default mode "800x600" (vrefresh out of range)
(II) SIS(0): Not using default mode "800x600" (vrefresh out of range)
(II) SIS(0): Not using default mode "800x600" (vrefresh out of range)
(II) SIS(0): Not using default mode "800x600" (vrefresh out of range)
(II) SIS(0): Not using default mode "800x600" (hsync out of range)
(II) SIS(0): Not using default mode "640x480" (vrefresh out of range)
(II) SIS(0): Not using default mode "640x480" (vrefresh out of range)
(II) SIS(0): Not using default mode "640x480" (vrefresh out of range)
(II) SIS(0): Not using default mode "640x480" (vrefresh out of range)
(II) SIS(0): Not using default mode "640x480" (vrefresh out of range)
(II) SIS(0): Not using default mode "640x480" (hsync out of range)
(II) SIS(0): Not using default mode "640x480" (hsync out of range)
(II) SIS(0): Not using default mode "1024x768" (vrefresh out of range)
(II) SIS(0): Not using default mode "1024x768" (vrefresh out of range)
(II) SIS(0): Not using default mode "1024x768" (vrefresh out of range)
(II) SIS(0): Not using default mode "1024x768" (vrefresh out of range)
(II) SIS(0): Not using default mode "1024x768" (hsync out of range)
(II) SIS(0): Not using default mode "1024x768" (hsync out of range)
(II) SIS(0): Not using default mode "1280x1024" (height too large for virtual size)
(II) SIS(0): Not using default mode "1280x1024" (height too large for virtual size)
(II) SIS(0): Not using default mode "1280x1024" (height too large for virtual size)
(II) SIS(0): Not using default mode "1280x1024" (height too large for virtual size)
(II) SIS(0): Not using default mode "1600x1200" (width too large for virtual size)
(II) SIS(0): Not using default mode "1600x1200" (width too large for virtual size)
(II) SIS(0): Not using default mode "1600x1200" (width too large for virtual size)
(II) SIS(0): Not using default mode "1600x1200" (width too large for virtual size)
(II) SIS(0): Not using default mode "1600x1200" (width too large for virtual size)
(II) SIS(0): Not using default mode "1600x1200" (width too large for virtual size)
(II) SIS(0): Not using default mode "1600x1200" (width too large for virtual size)
(II) SIS(0): Not using default mode "1920x1440" (width too large for virtual size)
(II) SIS(0): Not using default mode "1920x1440" (width too large for virtual size)
(II) SIS(0): Not using default mode "1920x1440" (width too large for virtual size)
(II) SIS(0): Not using default mode "1920x1440" (width too large for virtual size)
(II) SIS(0): Not using default mode "1920x1440" (width too large for virtual size)
(II) SIS(0): Not using default mode "1920x1440" (width too large for virtual size)
(II) SIS(0): Not using default mode "2048x1536" (width too large for virtual size)
(II) SIS(0): Not using default mode "2048x1536" (width too large for virtual size)
(II) SIS(0): Not using default mode "2048x1536" (width too large for virtual size)
(II) SIS(0): Not using default mode "2048x1536" (width too large for virtual size)
(II) SIS(0): Not using default mode "2048x1536" (width too large for virtual size)
(II) SIS(0): Not using default mode "800x480" (vrefresh out of range)
(II) SIS(0): Not using default mode "800x480" (vrefresh out of range)
(II) SIS(0): Not using default mode "1024x576" (vrefresh out of range)
(II) SIS(0): Not using default mode "1024x576" (vrefresh out of range)
(II) SIS(0): Not using default mode "1280x720" (vrefresh out of range)
(II) SIS(0): Not using default mode "1280x720" (hsync out of range)
(II) SIS(0): Not using default mode "1280x960" (height too large for virtual size)
(II) SIS(0): Not using default mode "1280x960" (height too large for virtual size)
(II) SIS(0): Not using default mode "1280x768" (vrefresh out of range)
(II) SIS(0): Not using default mode "1280x768" (hsync out of range)
(II) SIS(0): Not using default mode "1400x1050" (width too large for virtual size)
(II) SIS(0): Not using default mode "1400x1050" (width too large for virtual size)
(II) SIS(0): Not using default mode "1152x864" (height too large for virtual size)
(II) SIS(0): Not using default mode "1152x864" (height too large for virtual size)
(II) SIS(0): Not using default mode "1152x864" (height too large for virtual size)
(II) SIS(0): Not using default mode "848x480" (vrefresh out of range)
(II) SIS(0): Not using default mode "856x480" (vrefresh out of range)
(II) SIS(0): Not using default mode "1360x768" (width too large for virtual size)
(II) SIS(0): Not using default mode "1280x800" (vrefresh out of range)
(II) SIS(0): Not using default mode "1280x800" (hsync out of range)
(II) SIS(0): Not using default mode "1680x1050" (width too large for virtual size)
(II) SIS(0): Not using default mode "1920x1080" (width too large for virtual size)
(II) SIS(0): Not using default mode "1280x854" (height too large for virtual size)
(II) SIS(0): Not using default mode "1280x854" (height too large for virtual size)
(II) SIS(0): Not using default mode "1280x854" (height too large for virtual size)
(**) SIS(0): Virtual size is 1280x800 (pitch 1280)
(**) SIS(0): *Default mode "1280x800" (1280x800) (For CRT device: 107.9 MHz, 63.9 kHz, 59.9 Hz)
(**) SIS(0): *Default mode "1280x768" (1280x768) (For CRT device: 107.9 MHz, 63.9 kHz, 59.9 Hz)
(**) SIS(0): *Default mode "1280x720" (1280x720) (For CRT device: 107.9 MHz, 63.9 kHz, 59.9 Hz)
(**) SIS(0): *Default mode "1024x768" (1024x768) (For CRT device: 65.1 MHz, 48.5 kHz, 60.1 Hz)
(**) SIS(0): *Default mode "1024x576" (1024x576) (For CRT device: 65.1 MHz, 48.5 kHz, 60.1 Hz)
(**) SIS(0): *Default mode "960x600" (960x600) (For CRT device: 41.5 MHz, 37.1 kHz, 60.0 Hz)
(**) SIS(0): *Default mode "960x540" (960x540) (For CRT device: 37.3 MHz, 33.8 kHz, 60.0 Hz)
(**) SIS(0): *Default mode "800x600" (800x600) (For CRT device: 40.0 MHz, 37.9 kHz, 60.3 Hz)
(**) SIS(0): *Default mode "768x576" (768x576) (For CRT device: 35.0 MHz, 35.9 kHz, 60.1 Hz)
(**) SIS(0): *Default mode "720x576" (720x576) (For CRT device: 32.7 MHz, 35.9 kHz, 60.1 Hz)
(**) SIS(0): *Default mode "856x480" (856x480) (For CRT device: 33.9 MHz, 31.7 kHz, 59.8 Hz)
(**) SIS(0): *Default mode "848x480" (848x480) (For CRT device: 33.7 MHz, 31.0 kHz, 60.0 Hz)
(**) SIS(0): *Default mode "800x480" (800x480) (For CRT device: 39.8 MHz, 37.7 kHz, 60.0 Hz)
(**) SIS(0): *Default mode "720x480" (720x480) (For CRT device: 28.3 MHz, 31.6 kHz, 61.0 Hz)
(**) SIS(0): *Default mode "640x480" (640x480) (For CRT device: 25.1 MHz, 31.3 kHz, 59.7 Hz)
(**) SIS(0): *Default mode "640x400" (640x400) (For CRT device: 25.1 MHz, 31.6 kHz, 71.6 Hz)
(**) SIS(0): *Default mode "512x384" (512x384) (For CRT device: 32.6 MHz, 48.5 kHz, 60.1 Hz (D))
(**) SIS(0): *Default mode "400x300" (400x300) (For CRT device: 20.0 MHz, 37.9 kHz, 60.3 Hz (D))
(**) SIS(0): *Default mode "320x240" (320x240) (For CRT device: 12.5 MHz, 31.3 kHz, 60.7 Hz (D))
(**) SIS(0): *Default mode "320x200" (320x200) (For CRT device: 12.5 MHz, 31.3 kHz, 70.9 Hz (D))
(==) SIS(0): DPI set to (75, 75)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 6.8.99.900, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.2
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 6.8.99.900, module version = 1.2.0
ABI class: X.Org Video Driver, version 0.7
(II) SIS(0): 2D acceleration enabled
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xe2100000 - 0xe211ffff (0x20000) MX
[1] 0 0 0xe8000000 - 0xefffffff (0x8000000) MX
[2] -1 0 0xffe00000 - 0xffffffff (0x200000) MX(B)
[3] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MXE(B)
[4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX
[5] -1 0 0x000c0000 - 0x000effff (0x30000) MX
[6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX
[7] -1 0 0xe2000000 - 0xe2001fff (0x2000) MX
[8] -1 0 0xe2005000 - 0xe2005fff (0x1000) MX
[9] -1 0 0xe2004000 - 0xe2004fff (0x1000) MX
[10] -1 0 0xe2003000 - 0xe2003fff (0x1000) MX
[11] -1 0 0xe2002000 - 0xe2002fff (0x1000) MX
[12] -1 0 0xe0000000 - 0xdfffffff (0x0) MXO
[13] -1 0 0xe2100000 - 0xe211ffff (0x20000) MX(B)
[14] -1 0 0xe8000000 - 0xefffffff (0x8000000) MX(B)
[15] 0 0 0x000a0000 - 0x000affff (0x10000) MS(OprU)
[16] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS(OprU)
[17] 0 0 0x000b8000 - 0x000bffff (0x8000) MS(OprU)
[18] 0 0 0x0000a000 - 0x0000a07f (0x80) IX
[19] -1 0 0x0000ffff - 0x0000ffff (0x1) IX
[20] -1 0 0x00000000 - 0x000000ff (0x100) IX
[21] -1 0 0x00001800 - 0x000018ff (0x100) IX
[22] -1 0 0x00001c80 - 0x00001cff (0x80) IX
[23] -1 0 0x00001400 - 0x000014ff (0x100) IX
[24] -1 0 0x00001c00 - 0x00001c7f (0x80) IX
[25] -1 0 0x00001000 - 0x000010ff (0x100) IX
[26] -1 0 0x00002000 - 0x0000200f (0x10) IX
[27] -1 0 0x00008100 - 0x0000811f (0x20) IX
[28] -1 0 0x0000a000 - 0x0000a07f (0x80) IX(B)
[29] 0 0 0x000003b0 - 0x000003bb (0xc) IS(OprU)
[30] 0 0 0x000003c0 - 0x000003df (0x20) IS(OprU)
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/X11R6/lib/modules/libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 6.8.99.900, module version = 1.1.0
ABI class: X.Org Video Driver, version 0.7
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 6.8.99.900, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
(II) SIS(0): initializing int10
(II) SIS(0): Primary V_BIOS segment is: 0xc000
(II) SIS(0): VESA BIOS detected
(II) SIS(0): VESA VBE Version 3.0
(II) SIS(0): VESA VBE Total Mem: 16384 kB
(II) SIS(0): VESA VBE OEM: SiS
(II) SIS(0): VESA VBE OEM Software Rev: 1.0
(II) SIS(0): VESA VBE OEM Vendor: Silicon Integrated Systems Corp.
(II) SIS(0): VESA VBE OEM Product: 6330
(II) SIS(0): VESA VBE OEM Product Rev: 2.27.g7
(==) SIS(0): Write-combining range (0xe8000000,0x4000000)
(II) SIS(0): Setting standard mode 0x16
(II) SIS(0): SiS76x/UMA: two video overlay(s) available in current mode
(II) SIS(0): RENDER acceleration enabled
(II) SIS(0): Framebuffer from (0,0) to (1279,12990)
(II) SIS(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
8x8 color pattern filled rectangles
Solid Lines
Dashed Lines
Offscreen Pixmaps
Setting up tile and stipple cache:
32 128x128 slots
32 256x256 slots
16 512x512 slots
32 8x8 color pattern slots
(--) SIS(0): CPU frequency 1800.38Mhz
(II) SIS(0): Benchmarking system RAM to video RAM memory transfer methods:
(--) SIS(0): Checked libc memcpy()... 391.3 MiB/s
(--) SIS(0): Checked built-in-1 memcpy()... 391.9 MiB/s
(--) SIS(0): Checked built-in-2 memcpy()... 76.5 MiB/s
(--) SIS(0): Checked MMX memcpy()... 391.2 MiB/s
(--) SIS(0): Checked SSE memcpy()... 425.4 MiB/s
(--) SIS(0): Checked 3DNow! memcpy()... 400.8 MiB/s
(--) SIS(0): Checked MMX2 memcpy()... 426.0 MiB/s
(--) SIS(0): Using MMX2 method for aligned data transfers to video RAM
(--) SIS(0): Using MMX2 method for unaligned data transfers to video RAM
(==) SIS(0): Backing store disabled
(==) SIS(0): Silken mouse enabled
(**) Option "dpms"
(**) SIS(0): DPMS enabled
(II) SIS(0): Using SiS300/315/330/340 series HW Xv
(II) SIS(0): Default Xv adaptor is Video Overlay
(II) SIS(0): Initialized SISCTRL extension version 0.1
(II) SIS(0): Registered screen 0 with SISCTRL extension version 0.1
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(**) Option "CoreKeyboard"
(**) Keyboard1: Core Keyboard
(**) Option "Protocol" "standard"
(**) Keyboard1: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard1: XkbRules: "xorg"
(**) Keyboard1: XkbModel: "pc105"
(**) Option "XkbLayout" "us"
(**) Keyboard1: XkbLayout: "us"
(**) Option "XkbOptions" "compose:rwin"
(**) Keyboard1: XkbOptions: "compose:rwin"
(**) Option "CustomKeycodes" "off"
(**) Keyboard1: CustomKeycodes disabled
(**) Option "Protocol" "ExplorerPS/2"
(**) Mouse1: Device: "/dev/mouse"
(**) Mouse1: Protocol: "ExplorerPS/2"
(**) Option "CorePointer"
(**) Mouse1: Core Pointer
(**) Option "Device" "/dev/mouse"
(==) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "6 7"
(**) Mouse1: ZAxisMapping: buttons 6 and 7
(**) Mouse1: Buttons: 7
(II) Synaptics touchpad driver version 0.14.3
(--) SynapticsMouse1 auto-dev sets device to /dev/input/event1
(**) Option "Device" "/dev/input/event1"
(**) Option "SHMConfig" "on"
(**) Option "LeftEdge" "1700"
(**) Option "RightEdge" "5300"
(**) Option "TopEdge" "1700"
(**) Option "BottomEdge" "4200"
(**) Option "FingerLow" "25"
(**) Option "FingerHigh" "30"
(**) Option "MaxTapTime" "180"
(**) Option "MaxTapMove" "220"
(**) Option "VertScrollDelta" "100"
(--) SynapticsMouse1 touchpad found
(**) Option "AlwaysCore"
(**) SynapticsMouse1: always reports core events
(II) XINPUT: Adding extended input device "SynapticsMouse1" (type: MOUSE)
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
(II) XINPUT: Adding extended input device "Keyboard1" (type: KEYBOARD)
Synaptics DeviceInit called
SynapticsCtrl called.
(II) Mouse1: ps2EnableDataReporting: succeeded
Synaptics DeviceOn called
(--) SynapticsMouse1 touchpad found
Synaptics DeviceOff called
(II) SIS(0): Restoring by setting old mode 0x16
(II) SIS(0): Can't identify VESA mode number for mode 0x16
(II) Open ACPI successful (/var/run/acpid.socket)
(II) SIS(0): Setting standard mode 0x16
(II) SIS(0): SiS76x/UMA: two video overlay(s) available in current mode
Synaptics DeviceOn called
(--) SynapticsMouse1 touchpad found
(II) Mouse1: ps2EnableDataReporting: succeeded
SetClientVersion: 0 9



[Edited by - Halsafar on December 30, 2005 1:17:16 PM]

Share this post


Link to post
Share on other sites
What does /var/log/messages say after it crashes?

tail /var/log/messages should be enough so long as you do it right after the crash.

edit:
Also, if you're going to post big files, please use [ source ] tags.

Share this post


Link to post
Share on other sites
/var/log/messages is empty.

I am using Mandriva 2006, maybe it logs elsewhere?


ALso, another important note to sum up the problem:
- I can resize the window, if I resize the window all is okay.
- If I move the window, it crashes KDE.
- If I switch to full screen it crashes KDE.


THis stands true for even the NeHe SDL Tutorials.
That is almost a paradox.

Edit: I'll also add, apps like Kaffine play videos just fine in fullscreen or windowed no problems, no crashes, looks great. So unless Kaffine uses GL or SDL under the hood, I can conclude it is SDL/GL causing this problem.

Share this post


Link to post
Share on other sites
I notice you're using an SiS driver (you have my sympathy). For once last test, try running glxgears and see if you're still getting crashes. If so, you may just have to use Mesa or something like that instead of hardware accelerated OpenGL.

Share this post


Link to post
Share on other sites
Quote:
Original post by Halsafar
/var/log/messages is empty.

I am using Mandriva 2006, maybe it logs elsewhere?


ALso, another important note to sum up the problem:
- I can resize the window, if I resize the window all is okay.
- If I move the window, it crashes KDE.
- If I switch to full screen it crashes KDE.


THis stands true for even the NeHe SDL Tutorials.
That is almost a paradox.

Edit: I'll also add, apps like Kaffine play videos just fine in fullscreen or windowed no problems, no crashes, looks great. So unless Kaffine uses GL or SDL under the hood, I can conclude it is SDL/GL causing this problem.


paradox?

this may be more suitable question to ask on the SDL mailing list. they would know, in addition they have more experience with dealing with this kind of thing. what is the smallest program that demonstrates this behaviour?

something along the lines of

int( main( int, char ** )
{
SDL_Init( SDL_INIT_VIDEO );
at_exit(SDL_Quit);
SDL_SetVideoMode(..., SDL_OPENGL );

while(1)
{
while( SDL_PollEvent( &event ) )
{
if( event.type == SDL_QUIT )
exit(0);
}

drawSphere();
}
return 0;

}

Share this post


Link to post
Share on other sites
Yes I am very depressed with my video card.
glxgears gives the same problem.

It runs, fine. Here is the output:

1658 frames in 5.0 seconds = 331.529 FPS
Broken Pipe


The "Broken Pipe" does not appear until I close glxgears.

However:

If I move the glxgears app, KDE crashes. I can resize it thought... If I actually MOVE the window it crashes.


Also for using MESA, when Icheck on my openGL info in the system information it says I am using MESA, or at least MESA is in the driver name.

Share this post


Link to post
Share on other sites
Sign in to follow this  

  • Advertisement
×

Important Information

By using GameDev.net, you agree to our community Guidelines, Terms of Use, and Privacy Policy.

Participate in the game development conversation and more when you create an account on GameDev.net!

Sign me up!