Archived

This topic is now archived and is closed to further replies.

Terran Marine

OpenGL Sprites and transparency in OpenGL...

Recommended Posts

Terran Marine    122
Hi, Can anyone explain to me how to go about billboarding in OpenGL? The openGL User''s Guide says to use AlphaFunc(), but my images are 24-bits and don''t contain any alpha values. Thanks in advance.

Share this post


Link to post
Share on other sites
mittens    1323
change the blending function to glBlendFunc(GL_SRC_ALPHA, GL_ONE); and enable blending when
you draw the sprite... Of course, it makes the sprite more transparent all over which is rather annoying
I figured this out the hard way the other day... Alpha channels are a really nice thing to have in
your sprites.

------------------------------
Trent (ShiningKnight)
E-mail me
OpenGL Game Programming Tutorials

Share this post


Link to post
Share on other sites
zedzeek    528
alphafunc has nothing to do with billboarding. billboard is when u make a polygon face the screen, i believe theres a recent thread in nehe that has a bt of info about possible methods

Share this post


Link to post
Share on other sites
merlin9x9    174
It depends. If you have multiple levels of transparency in that alpha channel, you''ll need GL_RGBA (or something specific like GL_RGBA8). You might also be able to get away with a format like GL_RGB5_A1 (if you do this, chances are that the display adapter will store that texture in its native format, which would probably be GL_RGBA8) So, again, it depends on the image.

If you want to use the standard sort of sprites where a certain color value represents transparency, you can create the alpha channel at runtime. In the function you use to load images into a buffer (right before using that buffer to make a texture), analyze the RGB value to determine if it is. If so, make the alpha value 0, otherwise, make it 255 (assuming that you''re using an 8-bit byte per component). Then make the texture as in the paragraph above.

To make the alpha channel useful, you have to enable blending and use some blending such as glBlendFunc(GL_SRC_ALPHA, GL_ONE_MINUS_SRC_ALPHA) (that''s how I''ve always done it, though GL_SRC_ALPHA, GL_ONE might work as well).

So, then you have to draw the billboard. Since it needs to face the camera always, you just use the camera''s angle to determine the angle necessary to make the billboard parallel to it. Then just draw the billboard using the sprite texture and blending mode.

Share this post


Link to post
Share on other sites

  • Similar Content

    • By markshaw001
      Hi i am new to this forum  i wanted to ask for help from all of you i want to generate real time terrain using a 32 bit heightmap i am good at c++ and have started learning Opengl as i am very interested in making landscapes in opengl i have looked around the internet for help about this topic but i am not getting the hang of the concepts and what they are doing can some here suggests me some good resources for making terrain engine please for example like tutorials,books etc so that i can understand the whole concept of terrain generation.
       
    • By KarimIO
      Hey guys. I'm trying to get my application to work on my Nvidia GTX 970 desktop. It currently works on my Intel HD 3000 laptop, but on the desktop, every bind textures specifically from framebuffers, I get half a second of lag. This is done 4 times as I have three RGBA textures and one depth 32F buffer. I tried to use debugging software for the first time - RenderDoc only shows SwapBuffers() and no OGL calls, while Nvidia Nsight crashes upon execution, so neither are helpful. Without binding it runs regularly. This does not happen with non-framebuffer binds.
      GLFramebuffer::GLFramebuffer(FramebufferCreateInfo createInfo) { glGenFramebuffers(1, &fbo); glBindFramebuffer(GL_FRAMEBUFFER, fbo); textures = new GLuint[createInfo.numColorTargets]; glGenTextures(createInfo.numColorTargets, textures); GLenum *DrawBuffers = new GLenum[createInfo.numColorTargets]; for (uint32_t i = 0; i < createInfo.numColorTargets; i++) { glBindTexture(GL_TEXTURE_2D, textures[i]); GLint internalFormat; GLenum format; TranslateFormats(createInfo.colorFormats[i], format, internalFormat); // returns GL_RGBA and GL_RGBA glTexImage2D(GL_TEXTURE_2D, 0, internalFormat, createInfo.width, createInfo.height, 0, format, GL_FLOAT, 0); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MAG_FILTER, GL_NEAREST); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER, GL_NEAREST); DrawBuffers[i] = GL_COLOR_ATTACHMENT0 + i; glBindTexture(GL_TEXTURE_2D, 0); glFramebufferTexture(GL_FRAMEBUFFER, GL_COLOR_ATTACHMENT0 + i, textures[i], 0); } if (createInfo.depthFormat != FORMAT_DEPTH_NONE) { GLenum depthFormat; switch (createInfo.depthFormat) { case FORMAT_DEPTH_16: depthFormat = GL_DEPTH_COMPONENT16; break; case FORMAT_DEPTH_24: depthFormat = GL_DEPTH_COMPONENT24; break; case FORMAT_DEPTH_32: depthFormat = GL_DEPTH_COMPONENT32; break; case FORMAT_DEPTH_24_STENCIL_8: depthFormat = GL_DEPTH24_STENCIL8; break; case FORMAT_DEPTH_32_STENCIL_8: depthFormat = GL_DEPTH32F_STENCIL8; break; } glGenTextures(1, &depthrenderbuffer); glBindTexture(GL_TEXTURE_2D, depthrenderbuffer); glTexImage2D(GL_TEXTURE_2D, 0, depthFormat, createInfo.width, createInfo.height, 0, GL_DEPTH_COMPONENT, GL_FLOAT, 0); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MAG_FILTER, GL_NEAREST); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER, GL_NEAREST); glBindTexture(GL_TEXTURE_2D, 0); glFramebufferTexture(GL_FRAMEBUFFER, GL_DEPTH_ATTACHMENT, depthrenderbuffer, 0); } if (createInfo.numColorTargets > 0) glDrawBuffers(createInfo.numColorTargets, DrawBuffers); else glDrawBuffer(GL_NONE); if (glCheckFramebufferStatus(GL_FRAMEBUFFER) != GL_FRAMEBUFFER_COMPLETE) std::cout << "Framebuffer Incomplete\n"; glBindFramebuffer(GL_FRAMEBUFFER, 0); width = createInfo.width; height = createInfo.height; } // ... // FBO Creation FramebufferCreateInfo gbufferCI; gbufferCI.colorFormats = gbufferCFs.data(); gbufferCI.depthFormat = FORMAT_DEPTH_32; gbufferCI.numColorTargets = gbufferCFs.size(); gbufferCI.width = engine.settings.resolutionX; gbufferCI.height = engine.settings.resolutionY; gbufferCI.renderPass = nullptr; gbuffer = graphicsWrapper->CreateFramebuffer(gbufferCI); // Bind glBindFramebuffer(GL_DRAW_FRAMEBUFFER, fbo); // Draw here... // Bind to textures glActiveTexture(GL_TEXTURE0); glBindTexture(GL_TEXTURE_2D, textures[0]); glActiveTexture(GL_TEXTURE1); glBindTexture(GL_TEXTURE_2D, textures[1]); glActiveTexture(GL_TEXTURE2); glBindTexture(GL_TEXTURE_2D, textures[2]); glActiveTexture(GL_TEXTURE3); glBindTexture(GL_TEXTURE_2D, depthrenderbuffer); Here is an extract of my code. I can't think of anything else to include. I've really been butting my head into a wall trying to think of a reason but I can think of none and all my research yields nothing. Thanks in advance!
    • By Adrianensis
      Hi everyone, I've shared my 2D Game Engine source code. It's the result of 4 years working on it (and I still continue improving features ) and I want to share with the community. You can see some videos on youtube and some demo gifs on my twitter account.
      This Engine has been developed as End-of-Degree Project and it is coded in Javascript, WebGL and GLSL. The engine is written from scratch.
      This is not a professional engine but it's for learning purposes, so anyone can review the code an learn basis about graphics, physics or game engine architecture. Source code on this GitHub repository.
      I'm available for a good conversation about Game Engine / Graphics Programming
    • By C0dR
      I would like to introduce the first version of my physically based camera rendering library, written in C++, called PhysiCam.
      Physicam is an open source OpenGL C++ library, which provides physically based camera rendering and parameters. It is based on OpenGL and designed to be used as either static library or dynamic library and can be integrated in existing applications.
       
      The following features are implemented:
      Physically based sensor and focal length calculation Autoexposure Manual exposure Lense distortion Bloom (influenced by ISO, Shutter Speed, Sensor type etc.) Bokeh (influenced by Aperture, Sensor type and focal length) Tonemapping  
      You can find the repository at https://github.com/0x2A/physicam
       
      I would be happy about feedback, suggestions or contributions.

    • By altay
      Hi folks,
      Imagine we have 8 different light sources in our scene and want dynamic shadow map for each of them. The question is how do we generate shadow maps? Do we render the scene for each to get the depth data? If so, how about performance? Do we deal with the performance issues just by applying general methods (e.g. frustum culling)?
      Thanks,
       
  • Popular Now