• Announcements

    • khawk

      Download the Game Design and Indie Game Marketing Freebook   07/19/17

      GameDev.net and CRC Press have teamed up to bring a free ebook of content curated from top titles published by CRC Press. The freebook, Practices of Game Design & Indie Game Marketing, includes chapters from The Art of Game Design: A Book of Lenses, A Practical Guide to Indie Game Marketing, and An Architectural Approach to Level Design. The GameDev.net FreeBook is relevant to game designers, developers, and those interested in learning more about the challenges in game development. We know game development can be a tough discipline and business, so we picked several chapters from CRC Press titles that we thought would be of interest to you, the GameDev.net audience, in your journey to design, develop, and market your next game. The free ebook is available through CRC Press by clicking here. The Curated Books The Art of Game Design: A Book of Lenses, Second Edition, by Jesse Schell Presents 100+ sets of questions, or different lenses, for viewing a game’s design, encompassing diverse fields such as psychology, architecture, music, film, software engineering, theme park design, mathematics, anthropology, and more. Written by one of the world's top game designers, this book describes the deepest and most fundamental principles of game design, demonstrating how tactics used in board, card, and athletic games also work in video games. It provides practical instruction on creating world-class games that will be played again and again. View it here. A Practical Guide to Indie Game Marketing, by Joel Dreskin Marketing is an essential but too frequently overlooked or minimized component of the release plan for indie games. A Practical Guide to Indie Game Marketing provides you with the tools needed to build visibility and sell your indie games. With special focus on those developers with small budgets and limited staff and resources, this book is packed with tangible recommendations and techniques that you can put to use immediately. As a seasoned professional of the indie game arena, author Joel Dreskin gives you insight into practical, real-world experiences of marketing numerous successful games and also provides stories of the failures. View it here. An Architectural Approach to Level Design This is one of the first books to integrate architectural and spatial design theory with the field of level design. The book presents architectural techniques and theories for level designers to use in their own work. It connects architecture and level design in different ways that address the practical elements of how designers construct space and the experiential elements of how and why humans interact with this space. Throughout the text, readers learn skills for spatial layout, evoking emotion through gamespaces, and creating better levels through architectural theory. View it here. Learn more and download the ebook by clicking here. Did you know? GameDev.net and CRC Press also recently teamed up to bring GDNet+ Members up to a 20% discount on all CRC Press books. Learn more about this and other benefits here.
Sign in to follow this  
Followers 0

[SharpDX] Textures are rendered blurry

4 posts in this topic

I am sure that this topic has probably been posted a billion times, and I have looked around on Google(for quite a while) trying to find the answer to my problem. I am not the best with DirectX, or even OpenGL for that matter. For some reason, there's so many concepts to 3D programming that it overwhelms and confuses me.
I am using SharpDX(Direct3D9 to be exact) to render textures onto the screen. It's just a simple 2D game, so there's not a lot to it. I will show a few segments of my code and I will also list the things that I have tried and that have failed.

Public Sub InitD3D(ByVal form As Form, ByVal windowed As Boolean)
direct3D = New Direct3D()
Dim deviceSettings As PresentParameters
deviceSettings.BackBufferCount = 1
deviceSettings.BackBufferWidth = form.ClientSize.Width
deviceSettings.BackBufferHeight = form.ClientSize.Height
deviceSettings.DeviceWindowHandle = form.Handle
deviceSettings.Windowed = windowed
deviceSettings.PresentationInterval = PresentInterval.Immediate
deviceSettings.SwapEffect = SwapEffect.Discard
device = New Device(direct3D, 0, DeviceType.Hardware, form.Handle, CreateFlags.HardwareVertexProcessing, deviceSettings)
device.SetTransform(TransformState.Projection, Matrix.OrthoOffCenterLH(0.0!, Convert.ToSingle(form.ClientSize.Width), 0.0!, Convert.ToSingle(form.ClientSize.Height), 0.0!, 1.0!))
device.SetTransform(TransformState.View, Matrix.Identity)
device.SetTransform(TransformState.World, Matrix.Identity)
device.SetTransform(TransformState.Texture1, Matrix.Identity)
device.Viewport = New Viewport(0, 0, form.ClientSize.Width, form.ClientSize.Height)
device.SetRenderState(RenderState.Lighting, False)
additionalSwapChains = New Dictionary(Of String, SwapChain)()
End Sub

Public Sub LoadTexture(ByVal fileName As String, ByRef texture As Texture)
texture = texture.FromFile(device, fileName, Usage.None, Pool.Managed)
Catch ex As Exception
Throw New Exception("Failed to load texture from " + fileName)
End Try
End Sub
Public Sub Draw(ByVal texture As Texture, ByVal dx As Integer, ByVal dy As Integer, ByVal dw As Integer, ByVal dh As Integer, Optional ByVal sx As Integer = 0, Optional ByVal sy As Integer = 0)
device.VertexFormat = VertexFormat.Position Or VertexFormat.Texture1
device.SetTexture(0, texture)

Dim left As Single = Convert.ToSingle(dx) - 0.5!
Dim right As Single = Convert.ToSingle(dx + dw) - 0.5!
Dim bottom As Single = Convert.ToSingle(dy) - 0.5!
Dim top As Single = Convert.ToSingle(dy + dh) - 0.5!
Dim vertices(4) As CustomTextureVertex
vertices(0).position = New Vector3(left, top, 0.0!)
vertices(0).texPosition = New Vector2(0.0!, 0.0!)
vertices(1).position = New Vector3(right, top, 0.0!)
vertices(1).texPosition = New Vector2(1.0!, 0.0!)
vertices(2).position = New Vector3(left, bottom, 0.0!)
vertices(2).texPosition = New Vector2(0.0!, 1.0!)
vertices(3).position = New Vector3(right, bottom, 0.0!)
vertices(3).texPosition = New Vector2(1.0!, 1.0!)
device.DrawUserPrimitives(PrimitiveType.TriangleStrip, 2, vertices)
End Sub

Things I have tried:
Adjusting offset by 0.5f, didn't work
The dw & dh is the actual height, not the Powers of Two width/height
The position & texPosition are perfectly fine
Setting minFilter,magFilter,mipFilter,addressU,addressV to different values and nothing(I also placed it in InitD3D and Draw functions in case it mattered)

The last thing I tried could also be my problem because I did not go through and try every possibility, I have just used settings from other help topics.

Thanks for any help, it's greatly appreciated.

Share this post

Link to post
Share on other sites
It's almost definitely half-pixel offset but your previous attempt at offsetting by 0.5f was somehow incorrect. If you still have it, could you post the code you tried?

Share this post

Link to post
Share on other sites
I left the half pixel offset peice of code in there. In the draw function it is where I define the left,top,bottom,right. I subtract 0.5! from them. I think I have found my main cause, the texture I am using is 128x192, and when I load it, it does load it on a 128x256 texture. Well, I made sure that it rendered 128x192, but I did not pay attention to the texture. It stretches the texture to fit the 128x256 which is causing the problem. I saved the texture to a file and I saw that it was stretched.
What could I do to turn off the stretching when loading the texture?
Also, what's a way to get the true width and height of the texture(non power of two dimensions)

I have got it figured out with a little bit of messing around. Now I just need to find a way to get the true width/height of the texture, but I'll google around for that. For future reference, the solution I made was this for loading my texture:
texture = texture.FromFile(device, fileName, 0, 0, 0, Usage.None, Format.Unknown, Pool.Managed, Filter.Point, Filter.Box, 0)
I just changed the filter method basically. Edited by addy914

Share this post

Link to post
Share on other sites
Standard texture sizes are usually going to be power of two in size (because of hacks to speed up the math if I recall), so it will always end up 128x256. The only real exception to that is render targets, which can be any size (but I believe there's a lot of internal things going on to do that). When you're loading a regular texture, it will get the size and then find the next power of two size greater than that, and then scale accordingly using whatever settings you're specified, there isn't a way to actually disable this. If you want full control over the result, you'll need to either manually stretch the image (to handle scaling artifacts yourself), or make the image 128x256 and fill in the extra area with whatever. If you just fill in the rest, then when rendering you'll need to offset the texture coordinates to account for the difference, so instead of 0-1, it's 0-(192/256). Edited by xycsoscyx

Share this post

Link to post
Share on other sites
Well, not really. Most hardware these days is actually very capable of supporting non-power-of-two textures, so those old restrictions are largely dead. However, you need texture loading code that recognises this and loads the texture appropriately - not entirely certain how texture.FromFile is implemented but it should be doing so.

Share this post

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  
Followers 0

  • Similar Content

    • By Toastmastern
      So it's been a while since I took a break from my whole creating a planet in DX11. Last time around I got stuck on fixing a nice LOD.
      A week back or so I got help to find this:
      In general this is what I'm trying to recreate in DX11, he that made that planet LOD uses OpenGL but that is a minor issue and something I can solve. But I have a question regarding the code
      He gets the position using this row
      vec4d pos = b.var.vec4d["position"]; Which is then used further down when he sends the variable "center" into the drawing function:
      if (pos.len() < 1) pos.norm(); world::draw(vec3d(pos.x, pos.y, pos.z));  
      Inside the draw function this happens:
      draw_recursive(p3[0], p3[1], p3[2], center); Basically the 3 vertices of the triangle and the center of details that he sent as a parameter earlier: vec3d(pos.x, pos.y, pos.z)
      Now onto my real question, he does vec3d edge_center[3] = { (p1 + p2) / 2, (p2 + p3) / 2, (p3 + p1) / 2 }; to get the edge center of each edge, nothing weird there.
      But this is used later on with:
      vec3d d = center + edge_center[i]; edge_test[i] = d.len() > ratio_size; edge_test is then used to evaluate if there should be a triangle drawn or if it should be split up into 3 new triangles instead. Why is it working for him? shouldn't it be like center - edge_center or something like that? Why adding them togheter? I asume here that the center is the center of details for the LOD. the position of the camera if stood on the ground of the planet and not up int he air like it is now.

      Full code can be seen here:
      If anyone would like to take a look and try to help me understand this code I would love this person. I'm running out of ideas on how to solve this in my own head, most likely twisted it one time to many up in my head
      Thanks in advance
    • By fllwr0491
      I googled around but are unable to find source code or details of implementation.
      What keywords should I search for this topic?
      Things I would like to know:
      A. How to ensure that partially covered pixels are rasterized?
         Apparently by expanding each triangle by 1 pixel or so, rasterization problem is almost solved.
         But it will result in an unindexable triangle list without tons of overlaps. Will it incur a large performance penalty?
      B. A-buffer like bitmask needs a read-modiry-write operation.
         How to ensure proper synchronizations in GLSL?
         GLSL seems to only allow int32 atomics on image.
      C. Is there some simple ways to estimate coverage on-the-fly?
         In case I am to draw 2D shapes onto an exisitng target:
         1. A multi-pass whatever-buffer seems overkill.
         2. Multisampling could cost a lot memory though all I need is better coverage.
            Besides, I have to blit twice, if draw target is not multisampled.
    • By mapra99

      I am working on a recent project and I have been learning how to code in C# using OpenGL libraries for some graphics. I have achieved some quite interesting things using TAO Framework writing in Console Applications, creating a GLUT Window. But my problem now is that I need to incorporate the Graphics in a Windows Form so I can relate the objects that I render with some .NET Controls.

      To deal with this problem, I have seen in some forums that it's better to use OpenTK instead of TAO Framework, so I can use the glControl that OpenTK libraries offer. However, I haven't found complete articles, tutorials or source codes that help using the glControl or that may insert me into de OpenTK functions. Would somebody please share in this forum some links or files where I can find good documentation about this topic? Or may I use another library different of OpenTK?

    • By Solid_Spy
      Hello, I have been working on SH Irradiance map rendering, and I have been using a GLSL pixel shader to render SH irradiance to 2D irradiance maps for my static objects. I already have it working with 9 3D textures so far for the first 9 SH functions.
      In my GLSL shader, I have to send in 9 SH Coefficient 3D Texures that use RGBA8 as a pixel format. RGB being used for the coefficients for red, green, and blue, and the A for checking if the voxel is in use (for the 3D texture solidification shader to prevent bleeding).
      My problem is, I want to knock this number of textures down to something like 4 or 5. Getting even lower would be a godsend. This is because I eventually plan on adding more SH Coefficient 3D Textures for other parts of the game map (such as inside rooms, as opposed to the outside), to circumvent irradiance probe bleeding between rooms separated by walls. I don't want to reach the 32 texture limit too soon. Also, I figure that it would be a LOT faster.
      Is there a way I could, say, store 2 sets of SH Coefficients for 2 SH functions inside a texture with RGBA16 pixels? If so, how would I extract them from inside GLSL? Let me know if you have any suggestions ^^.
    • By KarimIO
      EDIT: I thought this was restricted to Attribute-Created GL contexts, but it isn't, so I rewrote the post.
      Hey guys, whenever I call SwapBuffers(hDC), I get a crash, and I get a "Too many posts were made to a semaphore." from Windows as I call SwapBuffers. What could be the cause of this?
      Update: No crash occurs if I don't draw, just clear and swap.
      static PIXELFORMATDESCRIPTOR pfd = // pfd Tells Windows How We Want Things To Be { sizeof(PIXELFORMATDESCRIPTOR), // Size Of This Pixel Format Descriptor 1, // Version Number PFD_DRAW_TO_WINDOW | // Format Must Support Window PFD_SUPPORT_OPENGL | // Format Must Support OpenGL PFD_DOUBLEBUFFER, // Must Support Double Buffering PFD_TYPE_RGBA, // Request An RGBA Format 32, // Select Our Color Depth 0, 0, 0, 0, 0, 0, // Color Bits Ignored 0, // No Alpha Buffer 0, // Shift Bit Ignored 0, // No Accumulation Buffer 0, 0, 0, 0, // Accumulation Bits Ignored 24, // 24Bit Z-Buffer (Depth Buffer) 0, // No Stencil Buffer 0, // No Auxiliary Buffer PFD_MAIN_PLANE, // Main Drawing Layer 0, // Reserved 0, 0, 0 // Layer Masks Ignored }; if (!(hDC = GetDC(windowHandle))) return false; unsigned int PixelFormat; if (!(PixelFormat = ChoosePixelFormat(hDC, &pfd))) return false; if (!SetPixelFormat(hDC, PixelFormat, &pfd)) return false; hRC = wglCreateContext(hDC); if (!hRC) { std::cout << "wglCreateContext Failed!\n"; return false; } if (wglMakeCurrent(hDC, hRC) == NULL) { std::cout << "Make Context Current Second Failed!\n"; return false; } ... // OGL Buffer Initialization glClear(GL_DEPTH_BUFFER_BIT | GL_COLOR_BUFFER_BIT); glBindVertexArray(vao); glUseProgram(myprogram); glDrawElements(GL_TRIANGLES, indexCount, GL_UNSIGNED_SHORT, (void *)indexStart); SwapBuffers(GetDC(window_handle));  
  • Popular Now