Sign in to follow this  

OpenGL Screen texture always appear black

This topic is 1962 days old which is more than the 365 day threshold we allow for new replies. Please post a new topic.

If you intended to correct an error in the post then please contact us.

Recommended Posts

Hey, I'm writing some kind of little engine in OpenGL. Currently I'm adding post processing.
When I started doing it, I was like "meh it's easy". And then I went into this big problem ;_;
Whenever I pass a screen texture into shader, it becomes black!
Here's my shader code:
[code]
uniform sampler2D sceneTexture;
varying vec2 uv;
uniform float time;

void main()
{
//gl_FragColor = vec4(uv.xy, 0.0, 1.0);
gl_FragColor = texture(sceneTexture, uv);
}
[/code]

However, if I uncomment the first line and comment the second one, everything works. I see correct texture coordinates. Here are main files where could be an error:
https://www.dropbox.com/s/dx5e0q6b7lidvup/Some%20of%20source.rar
It's 2nd day of hell ;_;

Share this post


Link to post
Share on other sites
Ok... I spammed my source with GL.GetError and found like two InvalidOperations.
Some of my functions was unbinding the fbo, so then whatever I tried to do with it I was getting InvalidOperation.
There are no InvalidOperations right now, but the code is still not working...

Share this post


Link to post
Share on other sites
Have you tested if the texture bound to sceneTexture is valid and contains proper data*? What do you see when you use the uncommented line? Do you see a yellow-greed-red gradient?

*note - based on its name it would seem sceneTexture is a procedural texture/FBO target. Make sure it doesn't contain mipmap data! AFAIR mipmaps need to be generated manually every time you update an FBO target for sampling to work properly, which makes it far easier to make any dynamic targets non-mipmapped in the first place (instead of GL_LINEAR_MIPMAP_LINEAR user GL_LINEAR when setting its properties).

Share this post


Link to post
Share on other sites
[quote name='irreversible' timestamp='1346592613' post='4975721']
Have you tested if the texture bound to sceneTexture is valid and contains proper data*? What do you see when you use the uncommented line? Do you see a yellow-greed-red gradient?

*note - based on its name it would seem sceneTexture is a procedural texture/FBO target. Make sure it doesn't contain mipmap data! AFAIR mipmaps need to be generated manually every time you update an FBO target for sampling to work properly, which makes it far easier to make any dynamic targets non-mipmapped in the first place (instead of GL_LINEAR_MIPMAP_LINEAR user GL_LINEAR when setting its properties).
[/quote]


Yes, yellow green red gradient. Black in the bottom left.
I tried binding texture loaded from disk and displaying, it works.

Share this post


Link to post
Share on other sites
This is my render texture creation code:
[code]
public void Create()
{
if (ID != -1)
{
Delete();
}
ID = GL.GenTexture();
this.Bind(TextureUnit.Texture0);
GL.TexParameter(TextureTarget.Texture2D, TextureParameterName.TextureMinFilter, (int)TextureMinFilter.Nearest);
GL.TexParameter(TextureTarget.Texture2D, TextureParameterName.TextureMagFilter, (int)TextureMagFilter.Nearest);
GL.TexParameter(TextureTarget.Texture2D, TextureParameterName.TextureWrapS, (int)TextureWrapMode.Clamp);
GL.TexParameter(TextureTarget.Texture2D, TextureParameterName.TextureWrapT, (int)TextureWrapMode.Clamp);
GL.TexImage2D(TextureTarget.Texture2D, 0, PIF, Width, Height, 0, PixelFormat, PixelType.UnsignedByte, IntPtr.Zero);
}
[/code]
I posted the code in OP, so you can check it out. Edited by MrOMGWTF

Share this post


Link to post
Share on other sites
Sign in to follow this  

  • Similar Content

    • By xhcao
      Does sync be needed to read texture content after access texture image in compute shader?
      My simple code is as below,
      glUseProgram(program.get());
      glBindImageTexture(0, texture[0], 0, GL_FALSE, 3, GL_READ_ONLY, GL_R32UI);
      glBindImageTexture(1, texture[1], 0, GL_FALSE, 4, GL_WRITE_ONLY, GL_R32UI);
      glDispatchCompute(1, 1, 1);
      // Does sync be needed here?
      glUseProgram(0);
      glBindFramebuffer(GL_READ_FRAMEBUFFER, framebuffer);
      glFramebufferTexture2D(GL_READ_FRAMEBUFFER, GL_COLOR_ATTACHMENT0,
                                     GL_TEXTURE_CUBE_MAP_POSITIVE_X + face, texture[1], 0);
      glReadPixels(0, 0, kWidth, kHeight, GL_RED_INTEGER, GL_UNSIGNED_INT, outputValues);
       
      Compute shader is very simple, imageLoad content from texture[0], and imageStore content to texture[1]. Does need to sync after dispatchCompute?
    • By Jonathan2006
      My question: is it possible to transform multiple angular velocities so that they can be reinserted as one? My research is below:
      // This works quat quaternion1 = GEQuaternionFromAngleRadians(angleRadiansVector1); quat quaternion2 = GEMultiplyQuaternions(quaternion1, GEQuaternionFromAngleRadians(angleRadiansVector2)); quat quaternion3 = GEMultiplyQuaternions(quaternion2, GEQuaternionFromAngleRadians(angleRadiansVector3)); glMultMatrixf(GEMat4FromQuaternion(quaternion3).array); // The first two work fine but not the third. Why? quat quaternion1 = GEQuaternionFromAngleRadians(angleRadiansVector1); vec3 vector1 = GETransformQuaternionAndVector(quaternion1, angularVelocity1); quat quaternion2 = GEQuaternionFromAngleRadians(angleRadiansVector2); vec3 vector2 = GETransformQuaternionAndVector(quaternion2, angularVelocity2); // This doesn't work //quat quaternion3 = GEQuaternionFromAngleRadians(angleRadiansVector3); //vec3 vector3 = GETransformQuaternionAndVector(quaternion3, angularVelocity3); vec3 angleVelocity = GEAddVectors(vector1, vector2); // Does not work: vec3 angleVelocity = GEAddVectors(vector1, GEAddVectors(vector2, vector3)); static vec3 angleRadiansVector; vec3 angularAcceleration = GESetVector(0.0, 0.0, 0.0); // Sending it through one angular velocity later in my motion engine angleVelocity = GEAddVectors(angleVelocity, GEMultiplyVectorAndScalar(angularAcceleration, timeStep)); angleRadiansVector = GEAddVectors(angleRadiansVector, GEMultiplyVectorAndScalar(angleVelocity, timeStep)); glMultMatrixf(GEMat4FromEulerAngle(angleRadiansVector).array); Also how do I combine multiple angularAcceleration variables? Is there an easier way to transform the angular values?
    • By dpadam450
      I have this code below in both my vertex and fragment shader, however when I request glGetUniformLocation("Lights[0].diffuse") or "Lights[0].attenuation", it returns -1. It will only give me a valid uniform location if I actually use the diffuse/attenuation variables in the VERTEX shader. Because I use position in the vertex shader, it always returns a valid uniform location. I've read that I can share uniforms across both vertex and fragment, but I'm confused what this is even compiling to if this is the case.
       
      #define NUM_LIGHTS 2
      struct Light
      {
          vec3 position;
          vec3 diffuse;
          float attenuation;
      };
      uniform Light Lights[NUM_LIGHTS];
       
       
    • By pr033r
      Hello,
      I have a Bachelor project on topic "Implenet 3D Boid's algorithm in OpenGL". All OpenGL issues works fine for me, all rendering etc. But when I started implement the boid's algorithm it was getting worse and worse. I read article (http://natureofcode.com/book/chapter-6-autonomous-agents/) inspirate from another code (here: https://github.com/jyanar/Boids/tree/master/src) but it still doesn't work like in tutorials and videos. For example the main problem: when I apply Cohesion (one of three main laws of boids) it makes some "cycling knot". Second, when some flock touch to another it scary change the coordination or respawn in origin (x: 0, y:0. z:0). Just some streng things. 
      I followed many tutorials, change a try everything but it isn't so smooth, without lags like in another videos. I really need your help. 
      My code (optimalizing branch): https://github.com/pr033r/BachelorProject/tree/Optimalizing
      Exe file (if you want to look) and models folder (for those who will download the sources):
      http://leteckaposta.cz/367190436
      Thanks for any help...

    • By Andrija
      I am currently trying to implement shadow mapping into my project , but although i can render my depth map to the screen and it looks okay , when i sample it with shadowCoords there is no shadow.
      Here is my light space matrix calculation
      mat4x4 lightViewMatrix; vec3 sun_pos = {SUN_OFFSET * the_sun->direction[0], SUN_OFFSET * the_sun->direction[1], SUN_OFFSET * the_sun->direction[2]}; mat4x4_look_at(lightViewMatrix,sun_pos,player->pos,up); mat4x4_mul(lightSpaceMatrix,lightProjMatrix,lightViewMatrix); I will tweak the values for the size and frustum of the shadow map, but for now i just want to draw shadows around the player position
      the_sun->direction is a normalized vector so i multiply it by a constant to get the position.
      player->pos is the camera position in world space
      the light projection matrix is calculated like this:
      mat4x4_ortho(lightProjMatrix,-SHADOW_FAR,SHADOW_FAR,-SHADOW_FAR,SHADOW_FAR,NEAR,SHADOW_FAR); Shadow vertex shader:
      uniform mat4 light_space_matrix; void main() { gl_Position = light_space_matrix * transfMatrix * vec4(position, 1.0f); } Shadow fragment shader:
      out float fragDepth; void main() { fragDepth = gl_FragCoord.z; } I am using deferred rendering so i have all my world positions in the g_positions buffer
      My shadow calculation in the deferred fragment shader:
      float get_shadow_fac(vec4 light_space_pos) { vec3 shadow_coords = light_space_pos.xyz / light_space_pos.w; shadow_coords = shadow_coords * 0.5 + 0.5; float closest_depth = texture(shadow_map, shadow_coords.xy).r; float current_depth = shadow_coords.z; float shadow_fac = 1.0; if(closest_depth < current_depth) shadow_fac = 0.5; return shadow_fac; } I call the function like this:
      get_shadow_fac(light_space_matrix * vec4(position,1.0)); Where position is the value i got from sampling the g_position buffer
      Here is my depth texture (i know it will produce low quality shadows but i just want to get it working for now):
      sorry because of the compression , the black smudges are trees ... https://i.stack.imgur.com/T43aK.jpg
      EDIT: Depth texture attachment:
      glTexImage2D(GL_TEXTURE_2D, 0,GL_DEPTH_COMPONENT24,fbo->width,fbo->height,0,GL_DEPTH_COMPONENT,GL_FLOAT,NULL); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MAG_FILTER, GL_LINEAR); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER, GL_LINEAR); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_WRAP_S, GL_CLAMP_TO_EDGE); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_WRAP_T, GL_CLAMP_TO_EDGE); glFramebufferTexture2D(GL_FRAMEBUFFER, GL_DEPTH_ATTACHMENT, GL_TEXTURE_2D, fbo->depthTexture, 0);
  • Popular Now