Sign in to follow this  
mrheisenberg

Getting a weird shader error: error X3018: invalid subscript 'xyz'

Recommended Posts

I get [b]error X3018: invalid subscript 'xyz' [/b]when I try to compile my vertex shader.Here is my shader code:

[CODE]
cbuffer PerFrameConstants : register(b0)
{
float4x4 worldViewProjectionMatrix;
float4x4 worldViewMatrix;
float4x4 viewProjectionMatrix;
float4x4 projectionMatrix;
float4 cameraNearFar;
uint4 framebufferDimensions;
float tessellationFactor;
float3 padding;
};

struct GeometryVSIn
{
float3 position : position;
float3 normal : normal;
float2 texCoord : texCoord;
float3 instancePosition : instancePosition;
float3 instanceRotation : instanceRotation;
};
struct GeometryVSOut
{
float4 position : SV_Position;
float3 positionView : positionView;
float3 normal : normal;
float2 texCoord : texCoord;
};


float4x4 RotateV2M(float3 rotation)
{
float4x4 rotateX = { 1.0f, 0.0f, 0.0f, 0.0f,
0.0f, cos(rotation.x), -sin(rotation.x), 0.0f,
0.0f, sin(rotation.x), cos(rotation.x), 0.0f,
0.0f, 0.0f, 0.0f, 1.0f };
float4x4 rotateY = { cos(rotation.y), 0.0, sin(rotation.y), 0.0f,
0.0f, 1.0f, 0.0f, 0.0f,
-sin(rotation.y), 0.0, cos(rotation.y), 0.0f,
0.0f, 0.0f, 0.0f, 1.0f };
float4x4 rotateZ = { cos(rotation.z), -sin(rotation.z), 0.0f, 0.0f,
sin(rotation.z), cos(rotation.z), 0.0f, 0.0f,
0.0f, 0.0f, 1.0f, 0.0f,
0.0f, 0.0f, 0.0f, 1.0f };
return mul(rotateY, mul(rotateX, rotateZ));
}

GeometryVSOut GeometryVS(GeometryVSIn input)
{
GeometryVSOut output;
output.position.x += input.instancePosition.x;
output.position.y += input.instancePosition.y;
output.position.z += input.instancePosition.z;
float4x4 rotationMatrix = RotateV2M(input.instanceRotation);
output.position = mul(float4(input.position, 1.0f), mul(worldViewProjectionMatrix, rotationMatrix));
output.positionView = mul(float4(input.position, 1.0f), mul(worldViewMatrix, rotationMatrix).xyz;
output.normal = mul(float4(input.normal, 0.0f), mul(worldViewMatrix, rotationMatrix)).xyz;
output.texCoord = input.texCoord;

return output;
}


[/CODE]



So the problem is in the last function(the main vertex shader one),it somehow has trouble converting from float3 to float4 I think,I'm actualy new to the .xyz functionality,I think it's called swizzling.Maybe I'm not implementing the swizzling properly?

Share this post


Link to post
Share on other sites
There is a syntax error in this row:

output.positionView = mul(float4(input.position, 1.0f), mul(worldViewMatrix, rotationMatrix).xyz;

As a hint, the error is not related to the swizzle itself. Edited by Nik02

Share this post


Link to post
Share on other sites
[quote name='Nik02' timestamp='1347384588' post='4978971']
There is a syntax error in this row:

output.positionView = mul(float4(input.position, 1.0f), mul(worldViewMatrix, rotationMatrix).xyz;

As a hint, the error is not related to the swizzle itself.
[/quote]

Thanks,I can't believe I missed that one,however I think there is still some problem with the actual vertex declaration,or I'm not doing the C++ side right:

[CODE]UINT shaderFlags = D3D10_SHADER_ENABLE_STRICTNESS | D3D10_SHADER_PACK_MATRIX_ROW_MAJOR;
ID3D10Blob *bytecode = 0;
HR(D3DX11CompileFromFile(L"GeometryVS.hlsl", defines, 0, "GeometryVS", "vs_5_0", shaderFlags, 0, 0, &bytecode, 0, 0));
const D3D11_INPUT_ELEMENT_DESC polygonLayout[] =
{
{"position", 0, DXGI_FORMAT_R32G32B32_FLOAT, 0, 0, D3D11_INPUT_PER_VERTEX_DATA, 0},
{"normal", 0, DXGI_FORMAT_R32G32B32_FLOAT, 0, 12, D3D11_INPUT_PER_VERTEX_DATA, 0},
{"texCoord", 0, DXGI_FORMAT_R32G32_FLOAT, 0, 24, D3D11_INPUT_PER_VERTEX_DATA, 0},
{"instancePosition", 0, DXGI_FORMAT_R32G32B32_FLOAT, 0, 0, D3D11_INPUT_PER_INSTANCE_DATA, 0},
{"instanceRotation", 0, DXGI_FORMAT_R32G32B32_FLOAT, 0, 12, D3D11_INPUT_PER_INSTANCE_DATA, 0},
};

HR(gD3DDevice->CreateInputLayout(polygonLayout, ARRAYSIZE(polygonLayout), bytecode->GetBufferPointer(), bytecode->GetBufferSize(), &vertexLayout));
gD3DImmediateContext->IASetInputLayout(vertexLayout);
SafeRelease(bytecode);
[/CODE]

I saw in a tutorial that you define the first 3 ones like this and the ''AlignedByteOffset'' was '0' for the first one, '12' for the second and '24' for the third,even tho the third(texcoord-2 elements) is smaller than the second(position-3 elements) and yet theyre both 12 bytes apart,so I'm confused-should I put the instance ones 12 bytes apart too for it to work with the above shader?

Share this post


Link to post
Share on other sites
The instance data is (likely) in a separate vertex stream. In the input element descriptions, you still say that they are in the first stream (the InputSlot field of the structure).

The offsets are correct. Edited by Nik02

Share this post


Link to post
Share on other sites
[quote name='mrheisenberg' timestamp='1347387402' post='4978984']
I saw in a tutorial that you define the first 3 ones like this and the ''AlignedByteOffset'' was '0' for the first one, '12' for the second and '24' for the third,even tho the third(texcoord-2 elements) is smaller than the second(position-3 elements) and yet theyre both 12 bytes apart,so I'm confused
[/quote]

Offset is calculated from the end of the previous element, it's not related to the current element you're declaring. If I have a 12 byte element, a 12 byte element, and an 8 byte element in that order:
- the first offset is 0 (since it's first in the list),
- the second is (previous offset ((0)) + length of previous element((12))), so 12,
- the third is (previous offset ((12)) + length of previous element ((12))), so 24.
if there had been a fourth element in the same stream, THEN you would have seen the 8-byte alignment make a difference in an offset value, as the next up would be 32.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

Sign in to follow this