Sign in to follow this  
D.V.D

Line Algorithm for Ray Tracing

Recommended Posts

D.V.D    1029
So I have looked all across the internet for a explanation and even code of a line drawing algorithm that travels only through one grid at a time while not requiring a endpoint (only start point and angle). I am familiar with bresenham's algorithm but I can't wrap my head around how it works. I know this site has a tutorial on it but it only explains the mechanics of one out of the 8 possible lines. I also haven't found many 3d versions of the algorithm and can imagine extrapolating to it to be very difficult especially when looking at some of the code shown. Can anyone please explain to me how it works and how I can change it to not require a endpoint?

Share this post


Link to post
Share on other sites
jameszhao00    271
What you're looking for is 3D DDA.

I remember implementing this a while ago... be careful that this type of stuff is extremely hard to implement well due to precision/logic errors and debugging difficulties:

Essentially we want to walk the grid while keeping track of the distance to the next grid cell in each dimension. Let's say in a grid of 1x1 cells, we're at (0, 0.5) (cell 0,0) with direction <1, 1>. The distance to the next cell in the X (DX) direction is sqrt(2), while the distance to the next cell in the Y direction (DY) is sqrt(1/2). Thus because DY is smaller, we need to go up 1 cell to cell (0, 1) (enters the cell at (0.5, 1)), and recalculate DX and DY. After we've went up 1 cell, DX is now smaller, so we need to visit the next cell in the X direction. And so forth.

You can optimize this by precomputing a whole set of values. I have implemented it here [url="https://github.com/jameszhao00/lightway/blob/master/sln/lightway/lightway/uniformgrid.cpp"]https://github.com/j...uniformgrid.cpp[/url]

dda_vals pre computes values
dda_next walks to the next cell, given current cell/info


Please again note that this kind of stuff is really frustrating/difficult to develop (my implemention is not correct for cases), so use a preexisting intersection library if at all possible (embree is great). Edited by jameszhao00

Share this post


Link to post
Share on other sites
D.V.D    1029
Thanks I kinda skimmed through it and Im not exactly sure if you do this or not, but I made a theory on how to make this algorithm in 2d. I haven't really understood lines in 3d much (still in highschool), but a line that travels on any angle other than 0, 45, 90, 135, 180, 225, 270, 315 and 360 either increases by more than one unit on the x or y value. So if the slope is greater than 1, you take the slope of the line, you create a count variable and in a loop, you subtract 1 unit from slope till slope is less than 1 and store the amount of times you subtracted in count. In your line loop were you actually run through the grids, you could then add one value of x, and add 1 count number of times. You can round the position variables if you want to check whats in the grid so if your sum is lets say x=1, y=2.51, you round it to 3 in a seperate variable, check the grid for anything and then add 1 again (if count isn't reached). So x=1, y=3.51,4.51,etc. Once your finished looping through count, you just add the slope which happens to be less than 1 to the y value. If slope is equal to lets say .70 and you finished adding count with a value of 4.51, you get 5.21. Round it again to check the grid (x=1, y=5) and so on.

To continue, you simply add x again and run through count again while adding the slope once your done adding 1 count times. With the slope initially being less than 1, I don't think you even need the count value because im pretty sure you can't skip a square with a value less than 1. Also, if slope is negative, simply add -1 and adjust the values that need to be negative to negative instead of keeping them positive. Example: if your in quadrent 1, x and y are positive, quadrent 2, x is negative, y is positive, etc.

Would this be a valid algorithm? And a quick one also as your only adding integers (1 float per iretation) for every grid you run through??

Share this post


Link to post
Share on other sites
Emergent    982
In any number of dimensions, drawing a line segment between two points works the same way. Algorithms like Bresenham and DDA are clever versions of what follows, implemented in ways that avoid floating-point arithmetic. For now, let's just use floats, and worry about the clever bits later.

You have two points,
p1 = (x1, y1, z1), and
p2 = (x2, y2, z2) .

You compute a vector
v = p2 - p1 = (x2-x1, y2-y1, z2-z1) .
from the first point to the second.

You scale this vector so that it is one on its largest (in absolute value) dimension, to get a new vector,
s = [ 1 / max( abs(v) ) ] v
(I.e., you divide each element of v by the largest absolute value found in v). This is how much you will step in each dimension on each iteration. The reason for this choice of scaling is to avoid gaps (if you stepped by more than one pixel in any dimension, you would get gaps).

Finally, you execute the following loop (pseudocode):

[code]
p = p1
for i = 1 to max(abs(v))
{
image(round(p)) = color
p = p + s
}
// Now p = p2.
[/code]

That's the basic idea.

DDA does this with integer math. I wouldn't worry about it until I'd implemented the floating-point version, but, I'll write a little about it here and include some MATLAB code at the end in case you're curious.

DDA, conceptually, just adds the vector "s" to the vector "p" over and over, but it splits all the numbers into two parts, which you should think of as being like "digits:"
- DDA stores everything to the left of the decimal point in units of 1 pixel.
- It stores everything to the right of the decimal point in units of 1/V-ths of a pixel, where V = max(abs(v)).
- It implements addition between these "mixed base" numbers, using the standard grade-school algorithm: You add the low parts, carry any overflow, and add the high parts.

Here's some (MATLAB) code [EDIT: fixed code; added comments]:

[code]
function img = rasterLineB(img, x1, x2, color)
% New, improved; conceptually cleaner, and without (obvious) bugs.
n = numel(x1); % Number of dimensions we're working in.

v = x2 - x1; % vector from x1 to x2
V = max(abs(v)); % Inf-norm of v

% In principle, we are computing the unit (in inf-norm) vector
% u = (1/V)*v .
% We are splitting the integers in u into a "most significant part," or "high" part, uh
% and a "least significant" or "low" part, ul, so that
% u = uh + (1/V)*ul .
uh = idivide(v, V, 'fix'); % Round towards zero ('floor' rounds towards negative infinity).
ul = rem(v, V); % Use this, not MATLAB's "mod!" This gives least significant part, preserving sign.

s = size(img); % Used in multidimensional array indexing
cp = int32(cumprod([1 s(1:end-1)]))'; % to compute a linear index

% Preallocate variables
idx = int32(0);
xh = x1; % High (most significant) part of position
xl = zeros(n,1, 'int32'); % Low (least significant) part of position
for k=1:V+1

idx = 1+sum((xh-1).*cp); % Compute linear index into array.
img(idx) = color;

% In principle, we have a point x, and a vector u, and we are just
% doing "x = x + u" over and over in a loop. Because we have split
% "x" and "u" into "low" and "high" parts, we do this as a "ripple carry"
% sum.
xl = xl + ul; % Add low parts
for j=1:n % Carry any overflow
if(abs(xl(j)) >= V) % Overflow
xh(j) = xh(j) + sign(xl(j)); % Do the carry
xl(j) = xl(j) - sign(xl(j))*V; % "Mod" the low part
end
xh(j) = xh(j) + uh(j); % Add the high parts
end

end
end
[/code] Edited by Emergent

Share this post


Link to post
Share on other sites
D.V.D    1029
I see but Im looking for a implementation that doesn't require a second point, is there a way to use the formula without the need of a second point but instead be given a angle?

Share this post


Link to post
Share on other sites
Emergent    982
[quote name='D.V.D' timestamp='1348972163' post='4985229']
I see but Im looking for a implementation that doesn't require a second point, is there a way to use the formula without the need of a second point but instead be given a angle?
[/quote]

That's what the vector "v" represents, actually. It represents a direction, together with a speed.

For our purposes, a vector is a list of numbers. The first tells you how far you move in the x direction per unit time; the second how far in the y direction, and so on. The idea works in any number of dimensions.

In general, this is the most useful way to think about rays -- in terms of vectors, not angles.

If the positive "z" direction points into the scene, and if your image is "W" pixels large in the x direction and "H" in the y direction, then, in camera space, a ray shooting through the (x,y) pixel moves along the vector,

v = (x - W/2, y - H/2, 1) .

Share this post


Link to post
Share on other sites
Emergent    982
I just realized you're probably looking for a 2d ray shooting algorithm (whereas in my last post I'd assumed you were trying to shoot rays into a 3d grid). Here; let me just give you some MATLAB code; then, between reading about line drawing algorithms and producing your own C/C++ implementation, you'll figure out how it works.

This function is nearly identical to the one I posted previously; the differences are:
1. "v=precision*[sin(theta); cos(theta)]" instead of "v=x2-x1."
2. Instead of iterating for a fixed number of steps (the length of the line), we iterate until we go out of bounds.

[code]function img = rasterRay2dBresenham(img, x0, theta, color)
% New, improved; conceptually cleaner, and without (obvious) bugs.
n = numel(x0); % Number of dimensions we're working in.
if(n ~= 2)
error('This function is for 2d rays.\n');
end

precision = 256; % An adjustable parameter.
v = int32(round(precision*[cos(theta); sin(theta)]));
V = max(abs(v)); % Inf-norm of v

% In principle, we are computing the unit (in inf-norm) vector
% u = (1/V)*v .
% We are splitting the integers in u into a "most significant part," or "high" part, uh
% and a "least significant" or "low" part, ul, so that
% u = uh + (1/V)*ul .
uh = idivide(v, V, 'fix'); % Round towards zero ('floor' rounds towards negative infinity).
ul = rem(v, V); % Use this, not MATLAB's "mod!" This gives least significant part, preserving sign.

s = size(img); % Used in multidimensional array indexing
cp = int32(cumprod([1 s(1:end-1)]))'; % to compute a linear index

% Preallocate variables
idx = int32(0);
xh = x0; % High (most significant) part of position
xl = zeros(n,1, 'int32'); % Low (least significant) part of position
while(true)

if(xh(1) < 1 || xh(1) > size(img,1) || ...
xh(2) < 1 || xh(2) > size(img,2))
break;
end

idx = 1+sum((xh-1).*cp); % Compute linear index into array.
img(idx) = color;

% In principle, we have a point x, and a vector u, and we are just
% doing "x = x + u" over and over in a loop. Because we have split
% "x" and "u" into "low" and "high" parts, we do this as a "ripple carry"
% sum.
xl = xl + ul; % Add low parts
for j=1:n % Carry any overflow
if(2*abs(xl(j)) >= V) % Overflow [Bresenham (rounds rather than floors/fixes)
%if(abs(xl(j)) >= V) % Overflow [DDA (grade school addition)]
% The reason we have some flexibility in when we choose to
% carry (e.g., Bresenham vs. DDA) is that, either way, we
% maintain the loop invariant
% x = xh + xl/V,
% so we have a sensible representation of our current
% position either way.
xh(j) = xh(j) + sign(xl(j)); % Do the carry
xl(j) = xl(j) - sign(xl(j))*V; % "Mod" the low part
end
xh(j) = xh(j) + uh(j); % Add the high parts
end

end
end
[/code]

Finally, let me give you one important caveat: Bresenham (or DDA) lines do [i]not[/i] hit all the cells that the ideal line passes through. So it's not appropriate for use as an intersection routine. Edited by Emergent

Share this post


Link to post
Share on other sites
D.V.D    1029
What difference does it make if I use angles or not? For example, I know that I want a certain amount of rays shot from point a to point b, and they can't go past a angle of 90 and 180 so I use angles to give direction to where they start. Btw I know its a late reply but Ill test this out soon.

Share this post


Link to post
Share on other sites
Bacterius    13165
[quote name='D.V.D' timestamp='1349988803' post='4989259']
What difference does it make if I use angles or not? For example, I know that I want a certain amount of rays shot from point a to point b, and they can't go past a angle of 90 and 180 so I use angles to give direction to where they start. Btw I know its a late reply but Ill test this out soon.
[/quote]
Angles have edge cases, wrap-around situations, expensive trig functions, etc... vector math removes all of this and makes everything work in a very general and elegant fashion. Atan2 is probably a testament to that, lol. Besides, if you do use angles, you'll eventually notice you often end up calculating for instance a cosine, just to take the arccosine of a related angle a few lines later...

Sure, it'll still work, but it'll be less stable, harder to code, and often also harder to understand.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

Sign in to follow this