Followers 0

# DX11 Terrain Blend With Pixel Shader

## 5 posts in this topic

Ok, I'm going to be quite generous with this post as I have seen this terrain blending question being asked repeatedly over and over and over.
I found a good tutorial ([url="http://www.innovativegames.net/blog/blog/2009/05/29/xna-game-engine-tutorial-12-introduction-to-hlsl-and-improved-terrain/"]http://www.innovativ...proved-terrain/[/url]) and I'm going to describe to you folks how to do it.
It uses a pixel shader to do the texture blending.
Only concern I have with it is that it is increadibly slow unless you have multiple channels for your video card. (check out bindless textures on the NVidia video cards [url="http://www.geforce.com/Active/en_US/en_US/pdf/GeForce-GTX-680-Whitepaper-FINAL.pdf"]http://www.geforce.c...paper-FINAL.pdf[/url])
However with the cards that run DX11 these days you'll have to tell me if its quicker because I get around 8 FPS.
With that in mind here's what I have completed that works.
First off your terrain model has to define its UV's to be from 0 to 1.
This is accomplished by dividing the number of vertexes across by 1 and number of vertexes down by 1.
My terrain is 128x128. So we get 0.0078125 and if we loop across starting at 0 when whe arrive at the 128th vertex we'll be at 1.
We can take advantage of this in the pixel shader. Here's how:

Set up a float value for how many times you want the texture to tile across the terrain.

float uvScale01 = 1.0;

in your program you'll have a handle set to this variable:

and you can set the variable from your program:

This is a mask in mine so I have it stretched across the whole terrain for the blending but if it were a texture you could make the scale something like 32 and it would tile across the whole terrain 32 times.
I'll show you how in a little bit.
Here is the sampler definition for the mask and a texture is just the same.
texture texture01;
sampler2D texture01Sampler = sampler_state
{
texture = texture01;
};
{
float4 pos : POSITION;
float3 norm : NORMAL;
float4 diffuse : COLOR;
float4 specular : COLOR1;
float2 uv1 : TEXCOORD;
float Depth : TEXCOORD1;
float3 vpos : TEXCOORD2;
};
{
float4 pos : POSITION;
float3 norm : NORMAL;
float4 diffuse : COLOR;
float4 specular : COLOR1;
float2 uv1 : TEXCOORD;
float Depth : TEXCOORD1;
float3 vpos : TEXCOORD2;
};
Not going to go into much detail here but this is how you pass the pixel from the primitive as it relates to the FVF to the pixel shader.
Grabbing the elements to pass to the PS:
{
// directional lighting
lightDir = normalize(lightDir);
output.pos = mul(input.pos, WorldViewProj);
output.vpos = input.pos;
// lighting
output.norm = normalize(mul(input.norm, World));
float d = dot(output.norm, lightDir);
d = clamp(d, ambient, 1.0);
output.diffuse = lightMaterial * d;
output.diffuse.a = 1.0;
output.specular = specularMaterial * d;
output.specular.a = 1.0;
// texture
output.uv1 = input.uv1;
// fog
output.Depth = output.pos.z;
return output;
}
Notice there are normals (vertex normal) and depth and things like that for more than just blending.
Now for the actual blend:
{
float4 final = {0, 0, 0, 0};
float4 lightMap;
float b1;
float b2;
float4 ts;
// =================================================================================
// Base Terrain Layer 1

final = tex2D(texture16Sampler, input.uv1 * uvScale16);
// =================================================================================
// Terrain Layer 1

maskMap = tex2D(texture01Sampler, input.uv1 * uvScale01);
{
b2 = 1.0 - b1;
ts = tex2D(texture02Sampler, input.uv1 * uvScale02);
final = (final * b1) + (ts * b2);
}
// =================================================================================
// Terrain Layer 2

maskMap = tex2D(texture03Sampler, input.uv1 * uvScale03);
{
b2 = 1.0 - b1;
ts = tex2D(texture04Sampler, input.uv1 * uvScale04);
final = (final * b1) + (ts * b2);
}
// =================================================================================
// Terrain Layer 3

maskMap = tex2D(texture05Sampler, input.uv1 * uvScale05);
{
b2 = 1.0 - b1;
ts = tex2D(texture06Sampler, input.uv1 * uvScale06);
final = (final * b1) + (ts * b2);
}
// =================================================================================
// Terrain Layer 4

maskMap = tex2D(texture07Sampler, input.uv1 * uvScale07);
{
b2 = 1.0 - b1;
ts = tex2D(texture08Sampler, input.uv1 * uvScale08);
final = (final * b1) + (ts * b2);
}
// =================================================================================
// Terrain Layer 5

maskMap = tex2D(texture09Sampler, input.uv1 * uvScale09);
{
b2 = 1.0 - b1;
ts = tex2D(texture10Sampler, input.uv1 * uvScale10);
final = (final * b1) + (ts * b2);
}
// =================================================================================
// Terrain Layer 6

maskMap = tex2D(texture11Sampler, input.uv1 * uvScale11);
{
b2 = 1.0 - b1;
ts = tex2D(texture12Sampler, input.uv1 * uvScale12);
final = (final * b1) + (ts * b2);
}
// =================================================================================
// Terrain Layer 7

maskMap = tex2D(texture13Sampler, input.uv1 * uvScale13);
{
b2 = 1.0 - b1;
ts = tex2D(texture14Sampler, input.uv1 * uvScale14);
final = (final * b1) + (ts * b2);
}
// =================================================================================
// Lightmap
// no scaling needed here as it goes across the whole terrain

lightMap = tex2D(texture15Sampler, input.uv1);
final *= lightMap;
// =================================================================================
// Fog
#include "fog.fxh"
// =================================================================================
// Return Color
final.a = 1.0;
return final;
}
technique terrainBlend
{
pass
{
#include "samplerStates.fxh"
}
}
Yup 7 layers of textures and a lightmap to boot. Ok looks a little daunting at first but here is what it is doing.
final is the returned pixel color and texture16 (0-15 samplers) is scaled (tiled) across the terrrain at scale16 times.
This is the base texture for the whole terrain.
final = tex2D(texture16Sampler, input.uv1 * uvScale16);
Then blend texture02Sampler with a bitmap mask or whatever mask you have defined. The mask just needs to be 24 bit and I use bmp's for the mask even though I uploaded a jpg. IE just doesn't want to display a bmp.
// =================================================================================
// Terrain Layer 1

maskMap = tex2D(texture01Sampler, input.uv1 * uvScale01);
{
b2 = 1.0 - b1;
ts = tex2D(texture02Sampler, input.uv1 * uvScale02);
final = (final * b1) + (ts * b2);
}

Here's the code to get the shader script executed:
{
r = graphics->device->DrawIndexedPrimitive(D3DPT_TRIANGLELIST, 0, 0, nbrVert, 0, count);

}
I used an indexed list of vertexes but you can use drawprimitive if you like. Not sure what you application is.

And thats all there is to it. It looks real nice when you get the shader script working and you don't need 12x128x2 triangles to do the blend.
You can actually do it on 1 triangle so you should be able to apply this to any form of texture blending that you may need.

PS. Fog way to cool.

float fogStart = 256.0;
float fogEnd = 4096.0;
float fogDensity = 0;
float minFog = 0.0;
float maxFog = 1.0;
float3 fogColor = {0.85, 0.85, 0.85};
if (fogDensity > 0)
{
float fog = (input.Depth - fogStart) / (fogEnd - fogStart);
fog *= fogDensity;
fog = clamp(fog, minFog, maxFog);
final = lerp(final, float4(fogColor, 1.0), fog);
}

Oh and one final note, you don't have to do just textures for a terrain. You can use a normal map and do per pixel bump mapping for dynamic lighting.

final = tex2D(texture01Sampler, input.uv1);
normalMap = tex2D(texture02Sampler, input.uv1);
NdL = dot(lightDir, normalMap);
final *= NdL;

let's not forget to make the alpha channel of the pixel 1 so it does't blend with itself.

final.a = 1.0;

And a really, really good texture artist is a must for making a real nice looking terrain so you don't get the fish net looking tiling from a semi-seemless texture pack. Way to go Id Software. http://www.moddb.com/games/enemy-territory-quake-wars/addons/mega-texture-media-pack

and voila! Happy terraining! Edited by codejockey
1

##### Share on other sites
Getting rid of the if statements should speed it up.
0

##### Share on other sites
+1 for sharing [img]http://public.gamedev.net//public/style_emoticons/default/biggrin.png[/img]
[quote name='Butabee' timestamp='1351048605' post='4993328']Getting rid of the if statements should speed it up.[/quote]^this, and using lerp is a lot faster than manually writing linear interpolation math. I'd also pack all the masks together to reduce the number of texture fetches:
e.g. http://pastebin.com/KfEw0sjW Edited by Hodgman
0

##### Share on other sites
You could also do dynamic branching to avoid texture fetches for textures that have zero for their mask (right now you're always doing all 16 texture fetches).

To do this you'll need to add the [branch] attribute before each if statement, and then switch from using tex2D to tex2Dlod (and calculate the miplevel manually outside the branch ([url="http://www.gamedev.net/blog/73/entry-1692117-terrain-texturing-explained/"]see here for an example[/url])).

I gotten significant performance improvements from doing this.

Of course this would only make sense if you have large portions of your terrain where the mask is 0 for some textures. Edited by phil_t
0

##### Share on other sites
"I gotten significant performance improvements from doing this."

That one is using a sheet of seemless textures which is only ONE texture and they calulate the UV coords in the shader to arrive at the seemless texture.

I'm new/noob to pixel shaders and the math so I'm sure mine won't ever be improved until I manage to get a further education in mathmatics and video game programming at a industry professional level. Just something to help the curious. Edited by codejockey
0

##### Share on other sites
I know it's different than what you're doing, I was just using it as an example of how to calculate the mipmap level manually (so you can use tex2Dlod, which lets you put texture sampling operations inside a dynamic branch that the GPU can actually skip).
0

## Create an account

Register a new account

Followers 0

• ### Similar Content

• Hi Guys,
I am revisiting an old DX11 framework I was creating a while back and am scratching my head with a small issue.
I am trying to set the pixel shader resources and am getting the following error on every loop.
As you can see in the below code, I am clearing out the shader resources as per the documentation. (Even going overboard and doing it both sides of the main PSSet call). But I just can't get rid of the error. Which results in the render target not being drawn.
ID3D11ShaderResourceView* srv = { 0 }; d3dContext->PSSetShaderResources(0, 1, &srv); for (std::vector<RenderTarget>::iterator it = rtVector.begin(); it != rtVector.end(); ++it) { if (it->szName == name) { //std::cout << it->srv <<"\r\n"; d3dContext->PSSetShaderResources(0, 1, &it->srv); break; } } d3dContext->PSSetShaderResources(0, 1, &srv);
I am storing the RT's in a vector and setting them by name. I have tested the it->srv and am retrieving a valid pointer.
At this stage I am out of ideas.
Any help would be greatly appreciated

• hi, guys, how to understand the math used in CDXUTDirectionWidget ::UpdateLightDir
the  following code snippet is taken from MS DXTU source code

D3DXMATRIX mInvView;
D3DXMatrixInverse( &mInvView, NULL, &m_mView );
mInvView._41 = mInvView._42 = mInvView._43 = 0;
D3DXMATRIX mLastRotInv;
D3DXMatrixInverse( &mLastRotInv, NULL, &m_mRotSnapshot );
D3DXMATRIX mRot = *m_ArcBall.GetRotationMatrix();
m_mRotSnapshot = mRot;
// Accumulate the delta of the arcball's rotation in view space.
// Note that per-frame delta rotations could be problematic over long periods of time.
m_mRot *= m_mView * mLastRotInv * mRot * mInvView;
// Since we're accumulating delta rotations, we need to orthonormalize
// the matrix to prevent eventual matrix skew
D3DXVECTOR3* pXBasis = ( D3DXVECTOR3* )&m_mRot._11;
D3DXVECTOR3* pYBasis = ( D3DXVECTOR3* )&m_mRot._21;
D3DXVECTOR3* pZBasis = ( D3DXVECTOR3* )&m_mRot._31;
D3DXVec3Normalize( pXBasis, pXBasis );
D3DXVec3Cross( pYBasis, pZBasis, pXBasis );
D3DXVec3Normalize( pYBasis, pYBasis );
D3DXVec3Cross( pZBasis, pXBasis, pYBasis );

https://github.com/Microsoft/DXUT/blob/master/Optional/DXUTcamera.cpp
• By YixunLiu
Hi,
I have a surface mesh and I want to use a cone to cut a hole on the surface mesh.
Anybody know a fast method to calculate the intersected boundary of these two geometries?

Thanks.

YL

• By hiya83
Hi, I tried searching for this but either I failed or couldn't find anything. I know there's D11/D12 interop and there are extensions for GL/D11 (though not very efficient). I was wondering if there's any Vulkan/D11 or Vulkan/D12 interop?
Thanks!

• Hi Guys,
I am just wondering if it is possible to acquire the address of the backbuffer if an API (based on DX11) only exposes the 'device' and 'context' pointers?
Any advice would be greatly appreciated

• 9
• 10
• 20
• 11
• 28