• Advertisement
Sign in to follow this  

DX11 Do people still use Techniques or passes? Or is it bad?

This topic is 1818 days old which is more than the 365 day threshold we allow for new replies. Please post a new topic.

If you intended to correct an error in the post then please contact us.

Recommended Posts

I've been wondering about whether or not I should use the Effects11.lib file for loading shaders using Directx11.0, or if I should just load the vertex and pixel shaders seperately using the built in d3dx11.h files without using techniques or passes. Which one is better? I know that Effects11.lib is deprecated, but do people still use it anyways? I figure that it would work just fine, but would a professional development team use it or not?

Edited by Solid_Spy

Share this post


Link to post
Share on other sites
Advertisement

If you're going to be happy getting your project out the door on D3D11, then use whatever you like. If there's a reasonable chance you'll want to upgrade to D3D12 whenever that happens, in in which the deprecated Effects11.lib might be removed, consider moving away from it now. Other than that it doesn't really matter what others are doing, do what's best for you, there's no right or wrong to worry about.

 

If it were me I'd probably make the switch now, as it seems like the sort of decision that has non-trivial design consequences.

Share this post


Link to post
Share on other sites

If you're going to be happy getting your project out the door on D3D11, then use whatever you like. If there's a reasonable chance you'll want to upgrade to D3D12 whenever that happens, in in which the deprecated Effects11.lib might be removed, consider moving away from it now. Other than that it doesn't really matter what others are doing, do what's best for you, there's no right or wrong to worry about.

 

If it were me I'd probably make the switch now, as it seems like the sort of decision that has non-trivial design consequences.

Thanks for the help :3 I've decided to stick with using the Effects11.lib library, as it seems to be easier to use, and you don't have to create a constant buffer.

Share this post


Link to post
Share on other sites

Sounds fine.

 

Just an additional note though -- The effects framework is just a layer on top of the lower-level functionality for setting up the pipeline. It takes care of a lot of the details for you, so you gain convenience at some cost to flexibility and fine-grained control. Neither approach is hands-down better than the other, it just depends on your needs and preferences (setting aside the deprecation issue, that is). Anyhow, I suspect you have some idea of this, but I just wanted to clarify that the effects framework isn't something fundamentally different than all the other stuff, its just a nice software layer on top of the other stuff. You could write your own, work-alike effects framework if you were so inclined.

Share this post


Link to post
Share on other sites

Oh, and also, I don't know how comparable it is to the entire technique thing, but DirectXTK (DirectX Tool Kit) provides a set of tools that are meant to kind of ease XNA programmers into C++ and modern (post 9.0c) DirectX and, among other things, provides Effects, texture loading, etc.

 

If you ever do become interested in switching over, that might offer a path of lesser resistance.

Share this post


Link to post
Share on other sites
Sign in to follow this  

  • Advertisement
  • Advertisement
  • Popular Tags

  • Advertisement
  • Popular Now

  • Similar Content

    • By AxeGuywithanAxe
      I wanted to see how others are currently handling descriptor heap updates and management.
      I've read a few articles and there tends to be three major strategies :
      1 ) You split up descriptor heaps per shader stage ( i.e one for vertex shader , pixel , hull, etc)
      2) You have one descriptor heap for an entire pipeline
      3) You split up descriptor heaps for update each update frequency (i.e EResourceSet_PerInstance , EResourceSet_PerPass , EResourceSet_PerMaterial, etc)
      The benefits of the first two approaches is that it makes it easier to port current code, and descriptor / resource descriptor management and updating tends to be easier to manage, but it seems to be not as efficient.
      The benefits of the third approach seems to be that it's the most efficient because you only manage and update objects when they change.
    • By evelyn4you
      hi,
      until now i use typical vertexshader approach for skinning with a Constantbuffer containing the transform matrix for the bones and an the vertexbuffer containing bone index and bone weight.
      Now i have implemented realtime environment  probe cubemaping so i have to render my scene from many point of views and the time for skinning takes too long because it is recalculated for every side of the cubemap.
      For Info i am working on Win7 an therefore use one Shadermodel 5.0 not 5.x that have more options, or is there a way to use 5.x in Win 7
      My Graphic Card is Directx 12 compatible NVidia GTX 960
      the member turanszkij has posted a good for me understandable compute shader. ( for Info: in his engine he uses an optimized version of it )
      https://turanszkij.wordpress.com/2017/09/09/skinning-in-compute-shader/
      Now my questions
       is it possible to feed the compute shader with my orignial vertexbuffer or do i have to copy it in several ByteAdressBuffers as implemented in the following code ?
        the same question is about the constant buffer of the matrixes
       my more urgent question is how do i feed my normal pipeline with the result of the compute Shader which are 2 RWByteAddressBuffers that contain position an normal
      for example i could use 2 vertexbuffer bindings
      1 containing only the uv coordinates
      2.containing position and normal
      How do i copy from the RWByteAddressBuffers to the vertexbuffer ?
       
      (Code from turanszkij )
      Here is my shader implementation for skinning a mesh in a compute shader:
      1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 struct Bone { float4x4 pose; }; StructuredBuffer<Bone> boneBuffer;   ByteAddressBuffer vertexBuffer_POS; // T-Pose pos ByteAddressBuffer vertexBuffer_NOR; // T-Pose normal ByteAddressBuffer vertexBuffer_WEI; // bone weights ByteAddressBuffer vertexBuffer_BON; // bone indices   RWByteAddressBuffer streamoutBuffer_POS; // skinned pos RWByteAddressBuffer streamoutBuffer_NOR; // skinned normal RWByteAddressBuffer streamoutBuffer_PRE; // previous frame skinned pos   inline void Skinning(inout float4 pos, inout float4 nor, in float4 inBon, in float4 inWei) {  float4 p = 0, pp = 0;  float3 n = 0;  float4x4 m;  float3x3 m3;  float weisum = 0;   // force loop to reduce register pressure  // though this way we can not interleave TEX - ALU operations  [loop]  for (uint i = 0; ((i &lt; 4) &amp;&amp; (weisum&lt;1.0f)); ++i)  {  m = boneBuffer[(uint)inBon].pose;  m3 = (float3x3)m;   p += mul(float4(pos.xyz, 1), m)*inWei;  n += mul(nor.xyz, m3)*inWei;   weisum += inWei;  }   bool w = any(inWei);  pos.xyz = w ? p.xyz : pos.xyz;  nor.xyz = w ? n : nor.xyz; }   [numthreads(1024, 1, 1)] void main( uint3 DTid : SV_DispatchThreadID ) {  const uint fetchAddress = DTid.x * 16; // stride is 16 bytes for each vertex buffer now...   uint4 pos_u = vertexBuffer_POS.Load4(fetchAddress);  uint4 nor_u = vertexBuffer_NOR.Load4(fetchAddress);  uint4 wei_u = vertexBuffer_WEI.Load4(fetchAddress);  uint4 bon_u = vertexBuffer_BON.Load4(fetchAddress);   float4 pos = asfloat(pos_u);  float4 nor = asfloat(nor_u);  float4 wei = asfloat(wei_u);  float4 bon = asfloat(bon_u);   Skinning(pos, nor, bon, wei);   pos_u = asuint(pos);  nor_u = asuint(nor);   // copy prev frame current pos to current frame prev pos streamoutBuffer_PRE.Store4(fetchAddress, streamoutBuffer_POS.Load4(fetchAddress)); // write out skinned props:  streamoutBuffer_POS.Store4(fetchAddress, pos_u);  streamoutBuffer_NOR.Store4(fetchAddress, nor_u); }  
    • By mister345
      Hi, can someone please explain why this is giving an assertion EyePosition!=0 exception?
       
      _lightBufferVS->viewMatrix = DirectX::XMMatrixLookAtLH(XMLoadFloat3(&_lightBufferVS->position), XMLoadFloat3(&_lookAt), XMLoadFloat3(&up));
      It looks like DirectX doesnt want the 2nd parameter to be a zero vector in the assertion, but I passed in a zero vector with this exact same code in another program and it ran just fine. (Here is the version of the code that worked - note XMLoadFloat3(&m_lookAt) parameter value is (0,0,0) at runtime - I debugged it - but it throws no exceptions.
          m_viewMatrix = DirectX::XMMatrixLookAtLH(XMLoadFloat3(&m_position), XMLoadFloat3(&m_lookAt), XMLoadFloat3(&up)); Here is the repo for the broken code (See LightClass) https://github.com/mister51213/DirectX11Engine/blob/master/DirectX11Engine/LightClass.cpp
      and here is the repo with the alternative version of the code that is working with a value of (0,0,0) for the second parameter.
      https://github.com/mister51213/DX11Port_SoftShadows/blob/master/Engine/lightclass.cpp
    • By mister345
      Hi, can somebody please tell me in clear simple steps how to debug and step through an hlsl shader file?
      I already did Debug > Start Graphics Debugging > then captured some frames from Visual Studio and
      double clicked on the frame to open it, but no idea where to go from there.
       
      I've been searching for hours and there's no information on this, not even on the Microsoft Website!
      They say "open the  Graphics Pixel History window" but there is no such window!
      Then they say, in the "Pipeline Stages choose Start Debugging"  but the Start Debugging option is nowhere to be found in the whole interface.
      Also, how do I even open the hlsl file that I want to set a break point in from inside the Graphics Debugger?
       
      All I want to do is set a break point in a specific hlsl file, step thru it, and see the data, but this is so unbelievably complicated
      and Microsoft's instructions are horrible! Somebody please, please help.
       
       
       

    • By mister345
      I finally ported Rastertek's tutorial # 42 on soft shadows and blur shading. This tutorial has a ton of really useful effects and there's no working version anywhere online.
      Unfortunately it just draws a black screen. Not sure what's causing it. I'm guessing the camera or ortho matrix transforms are wrong, light directions, or maybe texture resources not being properly initialized.  I didnt change any of the variables though, only upgraded all types and functions DirectX3DVector3 to XMFLOAT3, and used DirectXTK for texture loading. If anyone is willing to take a look at what might be causing the black screen, maybe something pops out to you, let me know, thanks.
      https://github.com/mister51213/DX11Port_SoftShadows
       
      Also, for reference, here's tutorial #40 which has normal shadows but no blur, which I also ported, and it works perfectly.
      https://github.com/mister51213/DX11Port_ShadowMapping
       
  • Advertisement