Sign in to follow this  

OpenGL Doing foliage in a jungle viewer

This topic is 1787 days old which is more than the 365 day threshold we allow for new replies. Please post a new topic.

If you intended to correct an error in the post then please contact us.

Recommended Posts

hey guys

I found this video of a jungle viewer using opengl here :

https://www.youtube.com/watch?v=4M-wfzuCgvs

 

now im no where near implementing such a project but i was wondering how the foliage in the forest implemented? The guy says he used 3ds max. Is it like he creates entire model of the trees n things in 3ds max and just loads it in opengl ? 

or is the foliage built using coordinates and texturing  ?

Any idea about this would be helpful.  

What if i wanted to implement a similar project..What things should i cover in opengl ? It maybe years before i can do it but i want to know the general topics involved. 

Share this post


Link to post
Share on other sites

Yeah, pretty much.

 

Note that the entire jungle isn't a single model though. Rather, it's made out of multiple objects, e.g. each type of tree would be a model. Then it repeats the same few models all over the place, maybe modifying them a bit (e.g. a bit of scaling or whatever). If you have a lot of repeated objects you may want to use instancing on modern hardware to reduce the amount of calls, otherwise you may just render them directly as needed.

Share this post


Link to post
Share on other sites

Is it like he creates entire model of the trees n things in 3ds max and just loads it in opengl ? 
or is the foliage built using coordinates and texturing  ?

Note that there is no real distinction here.

Art tools like Max just provide simpler ways to produce "coordinates and texturing" - you could painstakingly build each tree by hand, by manually specifying each coordinate (though you shouldn't, art tools were built for this).

Share this post


Link to post
Share on other sites

Don't know how this one did it, neither if "running realtime" was a target, but when looking at games such as Crysis, you could research the following topics:

 

* Terrain render (that is without trees, grass and rocks!)

How to render a LOD grid? How to blend the ground textures (via vertex painting)

 

* Water rendering

 

* Objects (trees, rocks, ...) & Instancing

In a jungle, you probably draw the same plants and trees dozens of times. Using VBO's & Instancing could give a big gain here.

 

* Placement of objects

How to place these objects. Randomly generated? Or done by an artist in a editor? As for games, they usually let the editor produce a random forest first, then the artist flies through with a bandsaw to move, add & delete objects.

 

* Athmosphere ./ skybox rendering

 

* Rendering method; Deferred / Forward

Deferred or Inferred rendering pipelines are popular these days as they allow to use bigger numbers of lamps. Then again, if you only want the sun and maybe a few other local sources, Forward might work easier for you. Depending on your choice, you need to think forward how you will render (semi) transparent stuff like grass and the leaves, because doing transparent rendering is more harsh in a Deferred pipeline. Not impossible, but you'll need some tricks.

 

Rick

Share this post


Link to post
Share on other sites
Sign in to follow this  

  • Similar Content

    • By xhcao
      Does sync be needed to read texture content after access texture image in compute shader?
      My simple code is as below,
      glUseProgram(program.get());
      glBindImageTexture(0, texture[0], 0, GL_FALSE, 3, GL_READ_ONLY, GL_R32UI);
      glBindImageTexture(1, texture[1], 0, GL_FALSE, 4, GL_WRITE_ONLY, GL_R32UI);
      glDispatchCompute(1, 1, 1);
      // Does sync be needed here?
      glUseProgram(0);
      glBindFramebuffer(GL_READ_FRAMEBUFFER, framebuffer);
      glFramebufferTexture2D(GL_READ_FRAMEBUFFER, GL_COLOR_ATTACHMENT0,
                                     GL_TEXTURE_CUBE_MAP_POSITIVE_X + face, texture[1], 0);
      glReadPixels(0, 0, kWidth, kHeight, GL_RED_INTEGER, GL_UNSIGNED_INT, outputValues);
       
      Compute shader is very simple, imageLoad content from texture[0], and imageStore content to texture[1]. Does need to sync after dispatchCompute?
    • By Jonathan2006
      My question: is it possible to transform multiple angular velocities so that they can be reinserted as one? My research is below:
      // This works quat quaternion1 = GEQuaternionFromAngleRadians(angleRadiansVector1); quat quaternion2 = GEMultiplyQuaternions(quaternion1, GEQuaternionFromAngleRadians(angleRadiansVector2)); quat quaternion3 = GEMultiplyQuaternions(quaternion2, GEQuaternionFromAngleRadians(angleRadiansVector3)); glMultMatrixf(GEMat4FromQuaternion(quaternion3).array); // The first two work fine but not the third. Why? quat quaternion1 = GEQuaternionFromAngleRadians(angleRadiansVector1); vec3 vector1 = GETransformQuaternionAndVector(quaternion1, angularVelocity1); quat quaternion2 = GEQuaternionFromAngleRadians(angleRadiansVector2); vec3 vector2 = GETransformQuaternionAndVector(quaternion2, angularVelocity2); // This doesn't work //quat quaternion3 = GEQuaternionFromAngleRadians(angleRadiansVector3); //vec3 vector3 = GETransformQuaternionAndVector(quaternion3, angularVelocity3); vec3 angleVelocity = GEAddVectors(vector1, vector2); // Does not work: vec3 angleVelocity = GEAddVectors(vector1, GEAddVectors(vector2, vector3)); static vec3 angleRadiansVector; vec3 angularAcceleration = GESetVector(0.0, 0.0, 0.0); // Sending it through one angular velocity later in my motion engine angleVelocity = GEAddVectors(angleVelocity, GEMultiplyVectorAndScalar(angularAcceleration, timeStep)); angleRadiansVector = GEAddVectors(angleRadiansVector, GEMultiplyVectorAndScalar(angleVelocity, timeStep)); glMultMatrixf(GEMat4FromEulerAngle(angleRadiansVector).array); Also how do I combine multiple angularAcceleration variables? Is there an easier way to transform the angular values?
    • By dpadam450
      I have this code below in both my vertex and fragment shader, however when I request glGetUniformLocation("Lights[0].diffuse") or "Lights[0].attenuation", it returns -1. It will only give me a valid uniform location if I actually use the diffuse/attenuation variables in the VERTEX shader. Because I use position in the vertex shader, it always returns a valid uniform location. I've read that I can share uniforms across both vertex and fragment, but I'm confused what this is even compiling to if this is the case.
       
      #define NUM_LIGHTS 2
      struct Light
      {
          vec3 position;
          vec3 diffuse;
          float attenuation;
      };
      uniform Light Lights[NUM_LIGHTS];
       
       
    • By pr033r
      Hello,
      I have a Bachelor project on topic "Implenet 3D Boid's algorithm in OpenGL". All OpenGL issues works fine for me, all rendering etc. But when I started implement the boid's algorithm it was getting worse and worse. I read article (http://natureofcode.com/book/chapter-6-autonomous-agents/) inspirate from another code (here: https://github.com/jyanar/Boids/tree/master/src) but it still doesn't work like in tutorials and videos. For example the main problem: when I apply Cohesion (one of three main laws of boids) it makes some "cycling knot". Second, when some flock touch to another it scary change the coordination or respawn in origin (x: 0, y:0. z:0). Just some streng things. 
      I followed many tutorials, change a try everything but it isn't so smooth, without lags like in another videos. I really need your help. 
      My code (optimalizing branch): https://github.com/pr033r/BachelorProject/tree/Optimalizing
      Exe file (if you want to look) and models folder (for those who will download the sources):
      http://leteckaposta.cz/367190436
      Thanks for any help...

    • By Andrija
      I am currently trying to implement shadow mapping into my project , but although i can render my depth map to the screen and it looks okay , when i sample it with shadowCoords there is no shadow.
      Here is my light space matrix calculation
      mat4x4 lightViewMatrix; vec3 sun_pos = {SUN_OFFSET * the_sun->direction[0], SUN_OFFSET * the_sun->direction[1], SUN_OFFSET * the_sun->direction[2]}; mat4x4_look_at(lightViewMatrix,sun_pos,player->pos,up); mat4x4_mul(lightSpaceMatrix,lightProjMatrix,lightViewMatrix); I will tweak the values for the size and frustum of the shadow map, but for now i just want to draw shadows around the player position
      the_sun->direction is a normalized vector so i multiply it by a constant to get the position.
      player->pos is the camera position in world space
      the light projection matrix is calculated like this:
      mat4x4_ortho(lightProjMatrix,-SHADOW_FAR,SHADOW_FAR,-SHADOW_FAR,SHADOW_FAR,NEAR,SHADOW_FAR); Shadow vertex shader:
      uniform mat4 light_space_matrix; void main() { gl_Position = light_space_matrix * transfMatrix * vec4(position, 1.0f); } Shadow fragment shader:
      out float fragDepth; void main() { fragDepth = gl_FragCoord.z; } I am using deferred rendering so i have all my world positions in the g_positions buffer
      My shadow calculation in the deferred fragment shader:
      float get_shadow_fac(vec4 light_space_pos) { vec3 shadow_coords = light_space_pos.xyz / light_space_pos.w; shadow_coords = shadow_coords * 0.5 + 0.5; float closest_depth = texture(shadow_map, shadow_coords.xy).r; float current_depth = shadow_coords.z; float shadow_fac = 1.0; if(closest_depth < current_depth) shadow_fac = 0.5; return shadow_fac; } I call the function like this:
      get_shadow_fac(light_space_matrix * vec4(position,1.0)); Where position is the value i got from sampling the g_position buffer
      Here is my depth texture (i know it will produce low quality shadows but i just want to get it working for now):
      sorry because of the compression , the black smudges are trees ... https://i.stack.imgur.com/T43aK.jpg
      EDIT: Depth texture attachment:
      glTexImage2D(GL_TEXTURE_2D, 0,GL_DEPTH_COMPONENT24,fbo->width,fbo->height,0,GL_DEPTH_COMPONENT,GL_FLOAT,NULL); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MAG_FILTER, GL_LINEAR); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER, GL_LINEAR); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_WRAP_S, GL_CLAMP_TO_EDGE); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_WRAP_T, GL_CLAMP_TO_EDGE); glFramebufferTexture2D(GL_FRAMEBUFFER, GL_DEPTH_ATTACHMENT, GL_TEXTURE_2D, fbo->depthTexture, 0);
  • Popular Now