Sign in to follow this  
Migi0027

DX11 DX11 SSAO - Wierd Overlay

Recommended Posts

Migi0027    4628

Hi guys!

 

Right now I'm facing a problem with SSAO, which is the following:

 

2d7j7r5.png

 

See those wierd dots or what it is, well that's my failed implementation of SSAO dry.png

 

And here's the output just from the ssao:

2h7l3le.png

 

Depth and Normal Rendering:

 

cbuffer ConstantObjectBuffer : register (b0)
{
	matrix worldMatrix;
	matrix viewMatrix;
	matrix projectionMatrix;

	float state;
	float3 pad;
};

struct VOut
{
    float4 position : SV_POSITION;
    float4 depthPosition : TEXTURE0;
	float4 normal : NORMAL;
};

VOut VShader(float4 position : POSITION, float4 normal : NORMAL)
{
    VOut output;

    position.w = 1.0f;

	// Calculate the position of the vertex against the world, view, and projection matrices.
    output.position = mul(position, worldMatrix);
    output.position = mul(output.position, viewMatrix);
    output.position = mul(output.position, projectionMatrix);

	output.normal = normal;

	// Store the position value in a second input value for depth value calculations.
	output.depthPosition = output.position;

    return output;
}

float4 PShader(VOut input) : SV_TARGET
{
	float4 color = float4(1,1,1,1);

	if (state == 5 || state == 2) // 5 or 2 is depth rendering
	{
		float depthValue;
		depthValue = input.depthPosition.z / input.depthPosition.w;
		color = float4(depthValue, depthValue, depthValue, 1.0f);
	}
	else if (state == 6) // 6 is normal rendering
	{
		float3 viewSpaceNormalizedNormals = 0.5 * normalize (input.normal) + 0.5;
		color = float4(viewSpaceNormalizedNormals, 1);
	}

	return color;
}

 

 

Full screen quad rendering (both depth and normal maps looks correct): PLEASE TAKE IN MIND THAT THIS SHADER HAS OTHER PURPOSES AND IS NEWLY BUILT, so there's mistakes... happy.png

 

Texture2D t_dffmap : register(t0);
Texture2D t_depthmap : register(t1);
Texture2D t_normalmap : register(t2);
Texture2D t_random : register(t3);
SamplerState ss;

cbuffer PARAMSBUFFER : register(b0)
{
	float time;
	float hblur;
	float bloomExtract;
	float bloom;
	float pixelDisortion;
	float pixelDisorterAmount;
	float2 space;
};

cbuffer BloomBuffer : register(b1)
{
	float BloomThreshold;
	float BloomSaturation;
	float BaseSaturation;
	float BloomIntensity;
	float BaseIntensity;
};

struct VS_Output
{  
    float4 Pos : SV_POSITION;              
    float2 Tex : TEXCOORD0;
    float2 texCoord1 : TEXCOORD1;
    float2 texCoord2 : TEXCOORD2;
    float2 texCoord3 : TEXCOORD3;
    float2 texCoord4 : TEXCOORD4;
    float2 texCoord5 : TEXCOORD5;
    float2 texCoord6 : TEXCOORD6;
    float2 texCoord7 : TEXCOORD7;
    float2 texCoord8 : TEXCOORD8;
    float2 texCoord9 : TEXCOORD9;
};
 
VS_Output VShader(uint id : SV_VertexID)
{
    VS_Output Output;
    Output.Tex = float2((id << 1) & 2, id & 2);
    Output.Pos = float4(Output.Tex * float2(2,-2) + float2(-1,1), 0, 1);

	if (hblur == 1)
	{
		float texelSize = 1.0f / 800;

		// Create UV coordinates for the pixel and its four horizontal neighbors on either side.
		Output.texCoord1 = Output.Tex + float2(texelSize * -4.0f, 0.0f);
		Output.texCoord2 = Output.Tex + float2(texelSize * -3.0f, 0.0f);
		Output.texCoord3 = Output.Tex + float2(texelSize * -2.0f, 0.0f);
		Output.texCoord4 = Output.Tex + float2(texelSize * -1.0f, 0.0f);
		Output.texCoord5 = Output.Tex + float2(texelSize *  0.0f, 0.0f);
		Output.texCoord6 = Output.Tex + float2(texelSize *  1.0f, 0.0f);
		Output.texCoord7 = Output.Tex + float2(texelSize *  2.0f, 0.0f);
		Output.texCoord8 = Output.Tex + float2(texelSize *  3.0f, 0.0f);
		Output.texCoord9 = Output.Tex + float2(texelSize *  4.0f, 0.0f);
	}
	
    return Output;
}

// Helper for modifying the saturation of a color.
float4 AdjustSaturation(float4 color, float saturation)
{
    // The constants 0.3, 0.59, and 0.11 are chosen because the
    // human eye is more sensitive to green light, and less to blue.
    float grey = dot(color, float3(0.3, 0.59, 0.11));

    return lerp(grey, color, saturation);
}

// Ambient Occlusion Stuff --------------------------------------------------

float3 getPosition(in float2 uv)
{
	return t_depthmap.Sample(ss, uv).xyz;
}

float3 getNormal(in float2 uv)
{
	return normalize(t_normalmap.Sample(ss, uv).xyz * 2.0f - 1.0f);
}

float2 getRandom(in float2 uv)
{
	return normalize(t_random.Sample(ss, float2(800, 600) * uv / 3 /*RZ*/).xy * 2.0f - 1.0f);
}

float doAmbientOcclusion(in float2 tcoord,in float2 uv, in float3 p, in float3 cnorm)
{
	float3 diff = getPosition(tcoord + uv) - p;
	const float3 v = normalize(diff);
	const float d = length(diff)*1; // g_scale
	return max(0.0,dot(cnorm,v)-0.01 /*g_bia*/)*(1.0/(1.0+d))*2/*g_int*/;
}

// End

float4 PShader(VS_Output input) : SV_TARGET
{
	float4 color = float4(0.0f, 0.0f, 0.0f, 0.0f);
	
	if (pixelDisortion == 1)
	{
		// Distortion factor
		float NoiseX = pixelDisorterAmount * (time/1000) * sin(input.Tex.x * input.Tex.y+time/1000);
		NoiseX=fmod(NoiseX,8) * fmod(NoiseX,4); 

		// Use our distortion factor to compute how much it will affect each
		// texture coordinate
		float DistortX = fmod(NoiseX,5);
		float DistortY = fmod(NoiseX,5+0.002);
 
		// Create our new texture coordinate based on our distortion factor
		input.Tex = float2(DistortX,DistortY);
	}

	float4 dffMAP = t_dffmap.Sample(ss, input.Tex);

	if (hblur == 1)
	{
		float weight0, weight1, weight2, weight3, weight4;
		float normalization;

		// Create the weights that each neighbor pixel will contribute to the blur.
		weight0 = 1.0f;
		weight1 = 0.9f;
		weight2 = 0.55f;
		weight3 = 0.18f;
		weight4 = 0.1f;

		 // Create a normalized value to average the weights out a bit.
		normalization = (weight0 + 2.0f * (weight1 + weight2 + weight3 + weight4));

		// Normalize the weights.
		weight0 = weight0 / normalization;
		weight1 = weight1 / normalization;
		weight2 = weight2 / normalization;
		weight3 = weight3 / normalization;
		weight4 = weight4 / normalization;

		// Add the nine horizontal pixels to the color by the specific weight of each.
		color += t_dffmap.Sample(ss, input.texCoord1) * weight4;
		color += t_dffmap.Sample(ss, input.texCoord2) * weight3;
		color += t_dffmap.Sample(ss, input.texCoord3) * weight2;
		color += t_dffmap.Sample(ss, input.texCoord4) * weight1;
		color += t_dffmap.Sample(ss, input.texCoord5) * weight0;
		color += t_dffmap.Sample(ss, input.texCoord6) * weight1;
		color += t_dffmap.Sample(ss, input.texCoord7) * weight2;
		color += t_dffmap.Sample(ss, input.texCoord8) * weight3;
		color += t_dffmap.Sample(ss, input.texCoord9) * weight4;
	}
	else
		color = dffMAP;

	if(bloom == 1)
	{
		// Look up the bloom and original base image colors.
		float4 bloom = saturate((dffMAP - BloomThreshold) / (1 - BloomThreshold));
    
		// Adjust color saturation and intensity.
		bloom = AdjustSaturation(bloom, BloomSaturation) * BloomIntensity;
		color = AdjustSaturation(color, BaseSaturation) * BaseIntensity;
    
		// Darken down the base image in areas where there is a lot of bloom,
		// to prevent things looking excessively burned-out.
		color *= (1 - saturate(bloom));
    
		// Combine the two images.
		color += bloom;
	}

	// Apply SSAO

	const float2 vec[4] = {float2(1,0),float2(-1,0),
			float2(0,1),float2(0,-1)};

	float3 p = getPosition(input.Tex);
	float3 n = getNormal(input.Tex);
	float2 rand = getRandom(input.Tex);

	float ao = 0.0f;
	float rad = 1/p.z; // g_s_r

	//**SSAO Calculation**//
	int iterations = 1;
	for (int j = 0; j < iterations; ++j)
	{
	  float2 coord1 = reflect(vec[j],rand)*rad;
	  float2 coord2 = float2(coord1.x*0.707 - coord1.y*0.707,
				  coord1.x*0.707 + coord1.y*0.707);
  
	  ao += doAmbientOcclusion(input.Tex,coord1*0.25, p, n);
	  ao += doAmbientOcclusion(input.Tex,coord2*0.5, p, n);
	  ao += doAmbientOcclusion(input.Tex,coord1*0.75, p, n);
	  ao += doAmbientOcclusion(input.Tex,coord2, p, n);
	}
	ao/=(float)iterations*4.0;

	color *= 1.0f - ao;

	return color;
}

 

 

Now what on earth am I doing wrong?

PS. I'm going to be gone for 10-11 hours from the start of this topic, but I'll come back!

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

Sign in to follow this  

  • Similar Content

    • By isu diss
       I'm trying to code Rayleigh part of Nishita's model (Display Method of the Sky Color Taking into Account Multiple Scattering). I get black screen no colors. Can anyone find the issue for me?
       
      #define InnerRadius 6320000 #define OutterRadius 6420000 #define PI 3.141592653 #define Isteps 20 #define Ksteps 10 static float3 RayleighCoeffs = float3(6.55e-6, 1.73e-5, 2.30e-5); RWTexture2D<float4> SkyColors : register (u0); cbuffer CSCONSTANTBUF : register( b0 ) { float fHeight; float3 vSunDir; } float Density(float Height) { return exp(-Height/8340); } float RaySphereIntersection(float3 RayOrigin, float3 RayDirection, float3 SphereOrigin, float Radius) { float t1, t0; float3 L = SphereOrigin - RayOrigin; float tCA = dot(L, RayDirection); if (tCA < 0) return -1; float lenL = length(L); float D2 = (lenL*lenL) - (tCA*tCA); float Radius2 = (Radius*Radius); if (D2<=Radius2) { float tHC = sqrt(Radius2 - D2); t0 = tCA-tHC; t1 = tCA+tHC; } else return -1; return t1; } float RayleighPhaseFunction(float cosTheta) { return ((3/(16*PI))*(1+cosTheta*cosTheta)); } float OpticalDepth(float3 StartPosition, float3 EndPosition) { float3 Direction = normalize(EndPosition - StartPosition); float RayLength = RaySphereIntersection(StartPosition, Direction, float3(0, 0, 0), OutterRadius); float SampleLength = RayLength / Isteps; float3 tmpPos = StartPosition + 0.5 * SampleLength * Direction; float tmp; for (int i=0; i<Isteps; i++) { tmp += Density(length(tmpPos)-InnerRadius); tmpPos += SampleLength * Direction; } return tmp*SampleLength; } static float fExposure = -2; float3 HDR( float3 LDR) { return 1.0f - exp( fExposure * LDR ); } [numthreads(32, 32, 1)] //disptach 8, 8, 1 it's 256 by 256 image void ComputeSky(uint3 DTID : SV_DispatchThreadID) { float X = ((2 * DTID.x) / 255) - 1; float Y = 1 - ((2 * DTID.y) / 255); float r = sqrt(((X*X)+(Y*Y))); float Theta = r * (PI); float Phi = atan2(Y, X); static float3 Eye = float3(0, 10, 0); float ViewOD = 0, SunOD = 0, tmpDensity = 0; float3 Attenuation = 0, tmp = 0, Irgb = 0; //if (r<=1) { float3 ViewDir = normalize(float3(sin(Theta)*cos(Phi), cos(Theta),sin(Theta)*sin(Phi) )); float ViewRayLength = RaySphereIntersection(Eye, ViewDir, float3(0, 0, 0), OutterRadius); float SampleLength = ViewRayLength / Ksteps; //vSunDir = normalize(vSunDir); float cosTheta = dot(normalize(vSunDir), ViewDir); float3 tmpPos = Eye + 0.5 * SampleLength * ViewDir; for(int k=0; k<Ksteps; k++) { float SunRayLength = RaySphereIntersection(tmpPos, vSunDir, float3(0, 0, 0), OutterRadius); float3 TopAtmosphere = tmpPos + SunRayLength*vSunDir; ViewOD = OpticalDepth(Eye, tmpPos); SunOD = OpticalDepth(tmpPos, TopAtmosphere); tmpDensity = Density(length(tmpPos)-InnerRadius); Attenuation = exp(-RayleighCoeffs*(ViewOD+SunOD)); tmp += tmpDensity*Attenuation; tmpPos += SampleLength * ViewDir; } Irgb = RayleighCoeffs*RayleighPhaseFunction(cosTheta)*tmp*SampleLength; SkyColors[DTID.xy] = float4(Irgb, 1); } }  
    • By amadeus12
      I made my obj parser
      and It also calculate tagent space for normalmap.
      it seems calculation is wrong..
      any good suggestion for this?
      I can't upload my pics so I link my question.
      https://gamedev.stackexchange.com/questions/147199/how-to-debug-calculating-tangent-space
      and I uploaded my code here


      ObjLoader.cpp
      ObjLoader.h
    • By Alessandro Pozzer
      Hi guys, 

      I dont know if this is the right section, but I did not know where to post this. 
      I am implementing a day night cycle on my game engine and I was wondering if there was a nice way to interpolate properly between warm colors, such as orange (sunset) and dark blue (night) color. I am using HSL format.
      Thank  you.
    • By thefoxbard
      I am aiming to learn Windows Forms with the purpose of creating some game-related tools, but since I know absolutely nothing about Windows Forms yet, I wonder:
      Is it possible to render a Direct3D 11 viewport inside a Windows Form Application? I see a lot of game editors that have a region of the window reserved for displaying and manipulating a 3D or 2D scene. That's what I am aiming for.
      Otherwise, would you suggest another library to create a GUI for game-related tools?
       
      EDIT:
      I've found a tutorial here in gamedev that shows a solution:
      Though it's for D3D9, I'm not sure if it would work for D3D11?
       
    • By Cyndanera
      in directx I need to know how would I play the animation in directx rendering frames for each part of the model moving parts - like the bones, how would would that work?
      I'm new to writing a animation player, for a model parser.
      I'm asking so I understand how to do this, I'm new to loading a model and playing\moving the bones to effect the mesh.
  • Popular Now