• Announcements

    • khawk

      Download the Game Design and Indie Game Marketing Freebook   07/19/17

      GameDev.net and CRC Press have teamed up to bring a free ebook of content curated from top titles published by CRC Press. The freebook, Practices of Game Design & Indie Game Marketing, includes chapters from The Art of Game Design: A Book of Lenses, A Practical Guide to Indie Game Marketing, and An Architectural Approach to Level Design. The GameDev.net FreeBook is relevant to game designers, developers, and those interested in learning more about the challenges in game development. We know game development can be a tough discipline and business, so we picked several chapters from CRC Press titles that we thought would be of interest to you, the GameDev.net audience, in your journey to design, develop, and market your next game. The free ebook is available through CRC Press by clicking here. The Curated Books The Art of Game Design: A Book of Lenses, Second Edition, by Jesse Schell Presents 100+ sets of questions, or different lenses, for viewing a game’s design, encompassing diverse fields such as psychology, architecture, music, film, software engineering, theme park design, mathematics, anthropology, and more. Written by one of the world's top game designers, this book describes the deepest and most fundamental principles of game design, demonstrating how tactics used in board, card, and athletic games also work in video games. It provides practical instruction on creating world-class games that will be played again and again. View it here. A Practical Guide to Indie Game Marketing, by Joel Dreskin Marketing is an essential but too frequently overlooked or minimized component of the release plan for indie games. A Practical Guide to Indie Game Marketing provides you with the tools needed to build visibility and sell your indie games. With special focus on those developers with small budgets and limited staff and resources, this book is packed with tangible recommendations and techniques that you can put to use immediately. As a seasoned professional of the indie game arena, author Joel Dreskin gives you insight into practical, real-world experiences of marketing numerous successful games and also provides stories of the failures. View it here. An Architectural Approach to Level Design This is one of the first books to integrate architectural and spatial design theory with the field of level design. The book presents architectural techniques and theories for level designers to use in their own work. It connects architecture and level design in different ways that address the practical elements of how designers construct space and the experiential elements of how and why humans interact with this space. Throughout the text, readers learn skills for spatial layout, evoking emotion through gamespaces, and creating better levels through architectural theory. View it here. Learn more and download the ebook by clicking here. Did you know? GameDev.net and CRC Press also recently teamed up to bring GDNet+ Members up to a 20% discount on all CRC Press books. Learn more about this and other benefits here.
Sign in to follow this  
Followers 0
Vincent_M

Learning Texturing for Modeling

5 posts in this topic

I've been learning Blender 3D, and it's a pretty nice modeling package. How that I'm getting better at modeling my objects' shapes, I'm going to have to start texturing soon. So far, the process I know is that I need to unwrap my 3D object's surface to a texture, or multiple textures. Then, export the unwrapped islands as textures to load into GIMP or PhotoShop, and begin filling them in with my own art. Once complete, send that new texture into Blender 3D, and it should appear correctly on my model due to unwrapping.

 

Does that sound correct so far?

 

Also, does anyone know of any good video tutorials out there that'll get me up to speed on unwrapping? I'm not sure when or where to use seems as opposed to using projection UV coordinates (plane, sphere, box, etc), etc when modeling something like a character or an object.

0

Share this post


Link to post
Share on other sites
I don't know very much about this topic. But one thing I know is that if a model looks the same on both sides often only half is textured, then that is mirrored.
0

Share this post


Link to post
Share on other sites

Yeah, that seems consistent with the tutorials and makes good sense too. So far, my objects have been basic, and I've found a few different ways on texturing from creating seems to unwrap the 3D surface to just using projection coordinates, which can be beneficial. My concern, for performance reasons, is how I would compile multiple textures into a single one for my basic scenes where I'm only modeling a character or something like that. This allows my engine to only swap the texture once for all objects and draw instead of (numObjects * numTextures) for all other cases.

 

What I'd like to find is a tutorial that'll show me how to unwrap a model from beginning to end, then create the texture from scratch in PhotoShop/GIMP just to give me an idea of the workflow a typical 3D artist would go through.

0

Share this post


Link to post
Share on other sites

Full tutorials on modeling and texturing from beginning to end are hard to find, mostly because every person dose something deferent.

 

The basic workflow is as follows:

High poly model --> low poly model (shell) --> UV unwrap low model --> Bake normals --> export uv too graphic editor --> create color(defuse) texture --> 

create Intensity(specular) texture --> create hardness(gloss)texture --> create any other textures needed (emit,ambient etc.)-->convert grey scale to normal --> 

overlay normals --> add textures to material or shader and you have a low poly 3d model.

 

To make the color texture some would start with the baked normal map as a base, other would use the ambient textures and again others will start with a seamless texture.

Speculars often use the color texture converted to a grey scale as a base, hardness textures often use a inverted specular overlaid with a grey normal map as a base.

 

The way you make textures is up to you as the artist and there is no real way to teach it to some one, because no one method will work for every material.

Learn each step on it's own and you will find lots of tutorials covering them.

0

Share this post


Link to post
Share on other sites

Hi all, long time lurker, first time poster...

 

I wanted to tune in on the topic as I had the same problem 2 years ago and became somewhat proficient since in texturing models.

 

To start off, I usually use 3D Coat for all my texture needs (Also for high-res detail sculpting, but thats beside the point) other than tiling Terrain textures (I use Gimp/PS for that)... its a tool were you can paint your finished model in full 3d. And even paint specular / normals at the same time.

 

But as this is a commercial product costing a sum (worth it if you ask me), you will be glad to hear that Blender itself has the same capabilities built in since 2.5:

http://www.youtube.com/watch?v=6R_65BvL_bw

http://www.youtube.com/watch?v=GSPIu3VyVJ8

 

I have never actually used the 3d texture paint mode in Blender, but if its anywhere near as useful as the paint room in 3D Coat, I would choose this tool over Gimp/PS for texturing a model anyday.... nothing speeds up the texturing process more as being able to see the final result (more or less, minus actual lighting and FX of course) in realtime while you paint. IMO, of course.

 

 

Hope this helps

 

Gian-Reto

Edited by Gianni
2

Share this post


Link to post
Share on other sites

You don't always have to have seems and there is no rule on seams. If you were to unwrap a sphere, obviously you can't just Project UV from view because of the roundess he uv's will not lay flat once the surface curves away from the view.

Your goal in unwrapping is to have every surface project from its normal direction so that it is as flat as possible. In other words its 2D uv coords should look and be as close as possible to how the surface looks in 3d on the object. Further a perfect square should not be a rectangle that is 10x100, the proportion is wrong, 10x10, or 100x100 is what you want.

You can always project from view instead of making seams. For example a box shouldnt have seams, just view the sides from left,right,top and select those specific faces and unwrap->project from view.

This might help, check out the texturing part (2nd video)
http://www.youtube.com/watch?v=gVsBRDeiIi4

www.blenderartists.org
 

Edited by dpadam450
0

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now
Sign in to follow this  
Followers 0