Jump to content
  • Advertisement
Sign in to follow this  
Ubermeowmix

OpenGL Arrgh openGL!

This topic is 1864 days old which is more than the 365 day threshold we allow for new replies. Please post a new topic.

If you intended to correct an error in the post then please contact us.

Recommended Posts

I'm having real trouble setting up openGL in windows.

 

Why can't I just open a console application and link in GLUT or freeGLUT and GLEW. I've tried 4 tutorials and gotten non complile errors on all of them.

 

What am I doing wrong, I thought swapping to openGL so I could port to all platforms would be a good idea but i'm having reservations now.

 

Why can't I just link freeGlut in the linker in Visual studio 10? or alternatively:

 

#include <GL/glew.h>
#include <GL/wglew.h>
#pragma comment(lib, "glew32.lib")
#pragma comment(lib, "opengl32.lib")

 

Any help will greatly increase the number of folicles left in my head at the end of the day!

Share this post


Link to post
Share on other sites
Advertisement
Clearly your problem is that you didn't stick your tongue out far enough or use the right curse words.

Specifics, man. Instead of just vague ranting, post specifics: error messages, what you are doing, what you have tried, etc...

Porting to all platforms is a lot more complicated than just switching to OpenGL, by the way.

Share this post


Link to post
Share on other sites

Yeah good point, but literally getting a basic window running on windows seems to be a nightmare.

 

Running the code from the intro link (http://duriansoftware.com/joe/An-intro-to-modern-OpenGL.-Table-of-Contents.html):

 

#include <stdlib.h>
#include <GL/glew.h>
#ifdef __APPLE__
# include <GLUT/glut.h>
#else
# include <GL/glut.h>
#endif
#include <stdio.h>
 
static int make_resources(void)
{
    return 1;
}
 
/*
* GLUT callbacks:
*/
static void update_fade_factor(void)
{
}
 
static void render(void)
{
    glClearColor(1.0f, 1.0f, 1.0f, 1.0f);
    glClear(GL_COLOR_BUFFER_BIT);
 
    glutSwapBuffers();
}
 
/*
* Entry point
*/
int main(int argc, char** argv)
{
    glutInit(&argc, argv);
    glutInitDisplayMode(GLUT_RGB | GLUT_DOUBLE);
    glutInitWindowSize(400, 300);
    glutCreateWindow("Hello World");
    glutIdleFunc(&update_fade_factor);
    glutDisplayFunc(&render);
 
    glewInit();
    if (!GLEW_VERSION_2_0) {
        fprintf(stderr, "OpenGL 2.0 not available\n");
        return 1;
    }
 
    if (!make_resources()) {
        fprintf(stderr, "Failed to load resources\n");
        return 1;
    }
 
    glutMainLoop();
    return 0;
}
 
Receiving:
 
LINK : fatal error LNK1104: cannot open file 'freeglut.lib'
 
P.S. this is as a console application opened in Visual Studio 10
Edited by Ubermeowmix

Share this post


Link to post
Share on other sites

I have used freeglut and GLEW in several Windows projects without any problem. They are actually a lot easier to install than most libraries in my experience. Some things to check:

1. Have you added the directories of GLEW and freeglut to your project?

2. Have you actually checked that those directories contain the libraries (and the include files) you are trying to link (and include)?

3. Have you included the directories containing the dynamic libraries to your PATH?

Edited by apatriarca

Share this post


Link to post
Share on other sites

This is the bit i really don't understand, why it is so difficult to just link to files/folders.

 

Why can't I just copy them to the project directory and then define it at the beginning, or can I and I haven't found out how.

 

Do I set the includes in the Linker->Input->file...  section, or VC++ Directories->Includes directories. Or does it have to be both!?

Share this post


Link to post
Share on other sites

3. Have you included the directories containing the dynamic libraries to your PATH?

 

Is this the Linker->Input section?

 

Where I would place:

 

glew32.lib
opengl32.lib

Share this post


Link to post
Share on other sites

You should have a directory with all of your .lib files in it. Then, in the project properties (make sure you do this for Release and Debug), put that directory in to Linker->General->Additional Library Directories. The directory you give should be relative to the .vcproj file (or absolute), or another option is to use the built-in VS macros to define it relative to your solution directory by doing something like "$(SolutionDir)../lib;". Then head over to Linker->Input->Additional Dependencies and list your .lib files spearated by semicolons (or one per line if you use the drop-down menu and hit the <Edit...> option) . Make sure to hit "Apply" at the bottom right instead of just pressing "Ok". Example for the Additional dependencies, part of mine looks like "glew32.lib;opengl32.lib;glu32.lib;"

 

 

opengl32.lib should be provided by the system, so you don't have to give a specific directory for that, you should just be able to add it to the Additional Dependencies.

Edited by Gambini

Share this post


Link to post
Share on other sites

(make sure you do this for Release and Debug)  - Do you mean when the code is finished? Is this best practice for when it is sent out to joe public?

 

The directory you give should be relative to the .vcproj file (or absolute) - So in the same folder as the .vcproj file basically?

 

Thanks for the advise btw, I appreciate the help.

Share this post


Link to post
Share on other sites

Dumped all the .lib files into a folder called \myIncludes, added it in Linker->General->Additional Library Directories.

 

It's still throwing LINK : fatal error LNK1104: cannot open file 'glut32.lib'

 

It's now rid itself of the freeglut error & swapped it for glut32.lib now lol.

Edited by Ubermeowmix

Share this post


Link to post
Share on other sites
Sign in to follow this  

  • Advertisement
  • Advertisement
  • Popular Tags

  • Similar Content

    • By nOoNEE
      i am reading this book : link
      in the OpenGL Rendering Pipeline section there is a picture like this: link
      but the question is this i dont really understand why it is necessary to turn pixel data in to fragment and then fragment into pixel could please give me a source or a clear Explanation that why it is necessary ? thank you so mu
       
       
    • By Inbar_xz
      I'm using the OPENGL with eclipse+JOGL.
      My goal is to create movement of the camera and the player.
      I create main class, which create some box in 3D and hold 
      an object of PlayerAxis.
      I create PlayerAxis class which hold the axis of the player.
      If we want to move the camera, then in the main class I call to 
      the func "cameraMove"(from PlayerAxis) and it update the player axis.
      That's work good.
      The problem start if I move the camera on 2 axis, 
      for example if I move with the camera right(that's on the y axis)
      and then down(on the x axis) -
      in some point the move front is not to the front anymore..
      In order to move to the front, I do
      player.playerMoving(0, 0, 1);
      And I learn that in order to keep the front move, 
      I need to convert (0, 0, 1) to the player axis, and then add this.
      I think I dont do the convert right.. 
      I will be glad for help!

      Here is part of my PlayerAxis class:
       
      //player coordinate float x[] = new float[3]; float y[] = new float[3]; float z[] = new float[3]; public PlayerAxis(float move_step, float angle_move) { x[0] = 1; y[1] = 1; z[2] = -1; step = move_step; angle = angle_move; setTransMatrix(); } public void cameraMoving(float angle_step, String axis) { float[] new_x = x; float[] new_y = y; float[] new_z = z; float alfa = angle_step * angle; switch(axis) { case "x": new_z = addVectors(multScalar(z, COS(alfa)), multScalar(y, SIN(alfa))); new_y = subVectors(multScalar(y, COS(alfa)), multScalar(z, SIN(alfa))); break; case "y": new_x = addVectors(multScalar(x, COS(alfa)), multScalar(z, SIN(alfa))); new_z = subVectors(multScalar(z, COS(alfa)), multScalar(x, SIN(alfa))); break; case "z": new_x = addVectors(multScalar(x, COS(alfa)), multScalar(y, SIN(alfa))); new_y = subVectors(multScalar(y, COS(alfa)), multScalar(x, SIN(alfa))); } x = new_x; y = new_y; z = new_z; normalization(); } public void playerMoving(float x_move, float y_move, float z_move) { float[] move = new float[3]; move[0] = x_move; move[1] = y_move; move[2] = z_move; setTransMatrix(); float[] trans_move = transVector(move); position[0] = position[0] + step*trans_move[0]; position[1] = position[1] + step*trans_move[1]; position[2] = position[2] + step*trans_move[2]; } public void setTransMatrix() { for (int i = 0; i < 3; i++) { coordiTrans[0][i] = x[i]; coordiTrans[1][i] = y[i]; coordiTrans[2][i] = z[i]; } } public float[] transVector(float[] v) { return multiplyMatrixInVector(coordiTrans, v); }  
      and in the main class i have this:
       
      public void keyPressed(KeyEvent e) { if (e.getKeyCode()== KeyEvent.VK_ESCAPE) { System.exit(0); //player move } else if (e.getKeyCode()== KeyEvent.VK_W) { //front //moveAmount[2] += -0.1f; player.playerMoving(0, 0, 1); } else if (e.getKeyCode()== KeyEvent.VK_S) { //back //moveAmount[2] += 0.1f; player.playerMoving(0, 0, -1); } else if (e.getKeyCode()== KeyEvent.VK_A) { //left //moveAmount[0] += -0.1f; player.playerMoving(-1, 0, 0); } else if (e.getKeyCode()== KeyEvent.VK_D) { //right //moveAmount[0] += 0.1f; player.playerMoving(1, 0, 0); } else if (e.getKeyCode()== KeyEvent.VK_E) { //moveAmount[0] += 0.1f; player.playerMoving(0, 1, 0); } else if (e.getKeyCode()== KeyEvent.VK_Q) { //moveAmount[0] += 0.1f; player.playerMoving(0, -1, 0); //camera move } else if (e.getKeyCode()== KeyEvent.VK_I) { //up player.cameraMoving(1, "x"); } else if (e.getKeyCode()== KeyEvent.VK_K) { //down player.cameraMoving(-1, "x"); } else if (e.getKeyCode()== KeyEvent.VK_L) { //right player.cameraMoving(-1, "y"); } else if (e.getKeyCode()== KeyEvent.VK_J) { //left player.cameraMoving(1, "y"); } else if (e.getKeyCode()== KeyEvent.VK_O) { //right round player.cameraMoving(-1, "z"); } else if (e.getKeyCode()== KeyEvent.VK_U) { //left round player.cameraMoving(1, "z"); } }  
      finallt found it.... i confused with the transformation matrix row and col. thanks anyway!
    • By Lewa
      So, i'm currently trying to implement an SSAO shader from THIS tutorial and i'm running into a few issues here.
      Now, this SSAO method requires view space positions and normals. I'm storing the normals in my deferred renderer in world-space so i had to do a conversion and reconstruct the position from the depth buffer.
      And something there goes horribly wrong (which has probably to do with worldspace to viewspace transformations).
      (here is the full shader source code if someone wants to take a look at it)
      Now, i suspect that the normals are the culprit.
      vec3 normal = ((uNormalViewMatrix*vec4(normalize(texture2D(sNormals, vTexcoord).rgb),1.0)).xyz); "sNormals" is a 2D texture which stores the normals in world space in a RGB FP16 buffer.
      Now i can't use the camera viewspace matrix to transform the normals into viewspace as the cameras position isn't set at (0,0,0), thus skewing the result.
      So what i did is to create a new viewmatrix specifically for this normal without the position at vec3(0,0,0);
      //"camera" is the camera which was used for rendering the normal buffer renderer.setUniform4m(ressources->shaderSSAO->getUniform("uNormalViewMatrix"), glmExt::createViewMatrix(glm::vec3(0,0,0),camera.getForward(),camera.getUp())//parameters are (position,forwardVector,upVector) ); Though i have the feeling this is the wrong approach. Is this right or is there a better/correct way of transforming a world space normal into viewspace?
    • By HawkDeath
      Hi,
      I'm trying mix two textures using own shader system, but I have a problem (I think) with uniforms.
      Code: https://github.com/HawkDeath/shader/tree/test
      To debug I use RenderDocs, but I did not receive good results. In the first attachment is my result, in the second attachment is what should be.
      PS. I base on this tutorial https://learnopengl.com/Getting-started/Textures.


    • By norman784
      I'm having issues loading textures, as I'm clueless on how to handle / load images maybe I missing something, but the past few days I just google a lot to try to find a solution. Well theres two issues I think, one I'm using Kotlin Native (EAP) and OpenGL wrapper / STB image, so I'm not quite sure wheres the issue, if someone with more experience could give me some hints on how to solve this issue?
      The code is here, if I'm not mistaken the workflow is pretty straight forward, stbi_load returns the pixels of the image (as char array or byte array) and you need to pass those pixels directly to glTexImage2D, so a I'm missing something here it seems.
      Regards
    • By Hashbrown
      I've noticed in most post processing tutorials several shaders are used one after another: one for bloom, another for contrast, and so on. For example: 
      postprocessing.quad.bind() // Effect 1 effect1.shader.bind(); postprocessing.texture.bind(); postprocessing.quad.draw(); postprocessing.texture.unbind(); effect1.shader.unbind(); // Effect 2 effect2.shader.bind(); // ...and so on postprocessing.quad.unbind() Is this good practice, how many shaders can I bind and unbind before I hit performance issues? I'm afraid I don't know what the good practices are in open/webGL regarding binding and unbinding resources. 
      I'm guessing binding many shaders at post processing is okay since the scene has already been updated and I'm just working on a quad and texture at that moment. Or is it more optimal to put shader code in chunks and bind less frequently? I'd love to use several shaders at post though. 
      Another example of what I'm doing at the moment:
      1) Loop through GameObjects, bind its phong shader (send color, shadow, spec, normal samplers), unbind all.
      2) At post: bind post processor quad, and loop/bind through different shader effects, and so on ...
      Thanks all! 
    • By phil67rpg
      void collision(int v) { collision_bug_one(0.0f, 10.0f); glutPostRedisplay(); glutTimerFunc(1000, collision, 0); } void coll_sprite() { if (board[0][0] == 1) { collision(0); flag[0][0] = 1; } } void erase_sprite() { if (flag[0][0] == 1) { glColor3f(0.0f, 0.0f, 0.0f); glBegin(GL_POLYGON); glVertex3f(0.0f, 10.0f, 0.0f); glVertex3f(0.0f, 9.0f, 0.0f); glVertex3f(1.0f, 9.0f, 0.0f); glVertex3f(1.0f, 10.0f, 0.0f); glEnd(); } } I am using glutTimerFunc to wait a small amount of time to display a collision sprite before I black out the sprite. unfortunately my code only blacks out the said sprite without drawing the collision sprite, I have done a great deal of research on the glutTimerFunc and  animation.
    • By Lewa
      So, i stumbled upon the topic of gamma correction.
      https://learnopengl.com/Advanced-Lighting/Gamma-Correction
      So from what i've been able to gather: (Please correct me if i'm wrong)
      Old CRT monitors couldn't display color linearly, that's why gamma correction was nessecary. Modern LCD/LED monitors don't have this issue anymore but apply gamma correction anyway. (For compatibility reasons? Can this be disabled?) All games have to apply gamma correction? (unsure about that) All textures stored in file formats (.png for example) are essentially stored in SRGB color space (as what we see on the monitor is skewed due to gamma correction. So the pixel information is the same, the percieved colors are just wrong.) This makes textures loaded into the GL_RGB format non linear, thus all lighting calculations are wrong You have to always use the GL_SRGB format to gamma correct/linearise textures which are in SRGB format  
      Now, i'm kinda confused how to proceed with applying gamma correction in OpenGL.
      First of, how can i check if my Monitor is applying gamma correction? I noticed in my monitor settings that my color format is set to "RGB" (can't modify it though.) I'm connected to my PC via a HDMI cable. I'm also using the full RGB range (0-255, not the 16 to ~240 range)
       
      What i tried to do is to apply a gamma correction shader shown in the tutorial above which looks essentially like this: (it's a postprocess shader which is applied at the end of the renderpipeline)
      vec3 gammaCorrection(vec3 color){ // gamma correction color = pow(color, vec3(1.0/2.2)); return color; } void main() { vec3 color; vec3 tex = texture2D(texture_diffuse, vTexcoord).rgb; color = gammaCorrection(tex); outputF = vec4(color,1.0f); } The results look like this:
      No gamma correction:
      With gamma correction:
       
      The colors in the gamma corrected image look really wased out. (To the point that it's damn ugly. As if someone overlayed a white half transparent texture. I want the colors to pop.)
      Do i have to change the textures from GL_RGB to GL_SRGB in order to gamma correct them in addition to applying the post process gamma correction shader? Do i have to do the same thing with all FBOs? Or is this washed out look the intended behaviour?
    • By OneKaidou
      Hi
       
      I am trying to program shadow volumes and i stumbled upon an artifact which i can not find the cause for.
      I generate the shadow volumes using a geometry shader with reversed extrusion (projecting the lightfacing triangles to infinity) and write the stencil buffer according to z-fail. The base of my code is the "lighting" chapter from learnopengl.com, where i extended the shader class to include geometry shader. I also modified the "lightingshader" to draw the ambient pass when "pass" is set to true and the diffuse/ specular pass when set to false. For easier testing i added a view controls to switch on/off the shadow volumes' color rendering or to change the cubes' position, i made the lightnumber controllable and changed the diffuse pass to render green for easier visualization of my problem.
       
      The first picture shows the rendered scene for one point light, all cubes and the front cube's shadow volume is the only one created (intentional). Here, all is rendered as it should be with all lit areas green and all areas inside the shadow volume black (with the volume's sides blended over).

      If i now turn on the shadow volumes for all the other cubes, we get a bit of a mess, but its also obvious that some areas that were in shadow before are now erroneously lit (for example the first cube to the right from the originaly shadow volumed cube). From my testing the areas erroneously lit are the ones where more than one shadow volume marks the area as shadowed.

      To check if a wrong stencil buffer value caused this problem i decided to change the stencil function for the diffuse pass to only render if the stencil is equal to 2. As i repeated this approach with different values for the stencil function i found out that if i set the value equal to 1 or any other uneven value the lit and shadowed areas are inverted and if i set it to 0 or any other even value i get the results shown above.
      This lead me to believe that the value and thus the stencil buffer values may be clamped to [0,1] which would also explain the artifact, because twice in shadow would equal in no shadow at all, but from what i found on the internet and from what i tested with
      GLint stencilSize = 0; glGetFramebufferAttachmentParameteriv(GL_DRAW_FRAMEBUFFER, GL_STENCIL, GL_FRAMEBUFFER_ATTACHMENT_STENCIL_SIZE, &stencilSize); my stencilsize is 8 bit, which should be values within [0,255].
      Does anyone know what might be the cause for this artifact or the confusing results with other stencil functions?
       
      // [the following code includes all used gl* functions, other parts are due to readability partialy excluded] // glfw: initialize and configure // ------------------------------ glfwInit(); glfwWindowHint(GLFW_CONTEXT_VERSION_MAJOR, 4); glfwWindowHint(GLFW_CONTEXT_VERSION_MINOR, 4); glfwWindowHint(GLFW_OPENGL_PROFILE, GLFW_OPENGL_CORE_PROFILE); // glfw window creation // -------------------- GLFWwindow* window = glfwCreateWindow(SCR_WIDTH, SCR_HEIGHT, "LearnOpenGL", NULL, NULL); if (window == NULL) { cout << "Failed to create GLFW window" << endl; glfwTerminate(); return -1; } glfwMakeContextCurrent(window); glfwSetFramebufferSizeCallback(window, framebuffer_size_callback); glfwSetCursorPosCallback(window, mouse_callback); glfwSetScrollCallback(window, scroll_callback); // tell GLFW to capture our mouse glfwSetInputMode(window, GLFW_CURSOR, GLFW_CURSOR_DISABLED); // glad: load all OpenGL function pointers // --------------------------------------- if (!gladLoadGLLoader((GLADloadproc)glfwGetProcAddress)) { cout << "Failed to initialize GLAD" << endl; return -1; } // ==================================================================================================== // window and functions are set up // ==================================================================================================== // configure global opengl state // ----------------------------- glEnable(GL_DEPTH_TEST); glEnable(GL_CULL_FACE); // build and compile our shader program [...] // set up vertex data (and buffer(s)) and configure vertex attributes [...] // shader configuration [...] // render loop // =========== while (!glfwWindowShouldClose(window)) { // input processing and fps calculation[...] // render // ------ glClearColor(0.1f, 0.1f, 0.1f, 1.0f); glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT); glDepthMask(GL_TRUE); //enable depth writing glDepthFunc(GL_LEQUAL); //avoid z-fighting //draw ambient component into color and depth buffer view = camera.GetViewMatrix(); projection = glm::perspective(glm::radians(camera.Zoom), (float)SCR_WIDTH / (float)SCR_HEIGHT, 0.1f, 100.0f); // setting up lighting shader for ambient pass [...] // render the cubes glBindVertexArray(cubeVAO); for (unsigned int i = 0; i < 10; i++) { //position cube [...] glDrawArrays(GL_TRIANGLES, 0, 36); } //------------------------------------------------------------------------------------------------------------------------ glDepthMask(GL_FALSE); //disable depth writing glEnable(GL_BLEND); glBlendFunc(GL_ONE, GL_ONE); //additive blending glEnable(GL_STENCIL_TEST); //setting up shadowShader and lightingShader [...] for (int light = 0; light < lightsused; light++) { glDepthFunc(GL_LESS); glClear(GL_STENCIL_BUFFER_BIT); //configure stencil ops for front- and backface to write according to z-fail glStencilOpSeparate(GL_FRONT, GL_KEEP, GL_DECR_WRAP, GL_KEEP); //-1 for front-facing glStencilOpSeparate(GL_BACK, GL_KEEP, GL_INCR_WRAP, GL_KEEP); //+1 for back-facing glStencilFunc(GL_ALWAYS, 0, GL_TRUE); //stencil test always passes if(hidevolumes) glColorMask(GL_FALSE, GL_FALSE, GL_FALSE, GL_FALSE); //disable writing to the color buffer glDisable(GL_CULL_FACE); glEnable(GL_DEPTH_CLAMP); //necessary to render SVs into infinity //draw SV------------------- shadowShader.use(); shadowShader.setInt("lightnr", light); int nr; if (onecaster) nr = 1; else nr = 10; for (int i = 0; i < nr; i++) { //position cube[...] glDrawArrays(GL_TRIANGLES, 0, 36); } //-------------------------- glDisable(GL_DEPTH_CLAMP); glEnable(GL_CULL_FACE); glStencilFunc(GL_EQUAL, 0, GL_TRUE); //stencil test passes for ==0 so only for non shadowed areas glStencilOp(GL_KEEP, GL_KEEP, GL_KEEP); //keep stencil values for illumination glColorMask(GL_TRUE, GL_TRUE, GL_TRUE, GL_TRUE); //enable writing to the color buffer glDepthFunc(GL_LEQUAL); //avoid z-fighting //draw diffuse and specular pass lightingShader.use(); lightingShader.setInt("lightnr", light); // render the cubes for (unsigned int i = 0; i < 10; i++) { //position cube[...] glDrawArrays(GL_TRIANGLES, 0, 36); } } glDisable(GL_BLEND); glDepthMask(GL_TRUE); //enable depth writing glDisable(GL_STENCIL_TEST); //------------------------------------------------------------------------------------------------------------------------ // also draw the lamp object(s) [...] // glfw: swap buffers and poll IO events (keys pressed/released, mouse moved etc.) // ------------------------------------------------------------------------------- glfwSwapBuffers(window); glfwP } // optional: de-allocate all resources once they've outlived their purpose: // ------------------------------------------------------------------------ glDeleteVertexArrays(1, &cubeVAO); glDeleteVertexArrays(1, &lightVAO); glDeleteBuffers(1, &VBO); // glfw: terminate, clearing all previously allocated GLFW resources. // ------------------------------------------------------------------ glfwTerminate(); return 0;  
    • By Green_Baron
      Hi,
      i am self teaching me graphics and oo programming and came upon this:
      My Window class creates an input handler instance, the glfw user pointer is redirected to that object and methods there do the input handling for keyboard and mouse. That works. Now as part of the input handling i have an orbiting camera that is controlled by mouse movement. GLFW_CURSOR_DISABLED is set as proposed in the glfw manual. The manual says that in this case the cursor is automagically reset to the window's center. But if i don't reset it manually with glfwSetCursorPos( center ) mouse values seem to add up until the scene is locked up.
      Here are some code snippets, mostly standard from tutorials:
      // EventHandler m_eventHandler = new EventHandler( this, glm::vec3( 0.0f, 5.0f, 0.0f ), glm::vec3( 0.0f, 1.0f, 0.0f ) ); glfwSetWindowUserPointer( m_window, m_eventHandler ); m_eventHandler->setCallbacks(); Creation of the input handler during window creation. For now, the camera is part of the input handler, hence the two vectors (position, up-vector).  In future i'll take that functionally out into an own class that inherits from the event handler.
      void EventHandler::setCallbacks() { glfwSetCursorPosCallback( m_window->getWindow(), cursorPosCallback ); glfwSetKeyCallback( m_window->getWindow(), keyCallback ); glfwSetScrollCallback( m_window->getWindow(), scrollCallback ); glfwSetMouseButtonCallback( m_window->getWindow(), mouseButtonCallback ); } Set callbacks in the input handler.
      // static void EventHandler::cursorPosCallback( GLFWwindow *w, double x, double y ) { EventHandler *c = reinterpret_cast<EventHandler *>( glfwGetWindowUserPointer( w ) ); c->onMouseMove( (float)x, (float)y ); } Example for the cursor pos callback redirection to a class method.
      // virtual void EventHandler::onMouseMove( float x, float y ) { if( x != 0 || y != 0 ) { // @todo cursor should be set automatically, according to doc if( m_window->isCursorDisabled() ) glfwSetCursorPos( m_window->getWindow(), m_center.x, m_center.y ); // switch up/down because its more intuitive m_yaw += m_mouseSensitivity * ( m_center.x - x ); m_pitch += m_mouseSensitivity * ( m_center.y - y ); // to avoid locking if( m_pitch > 89.0f ) m_pitch = 89.0f; if( m_pitch < -89.0f ) m_pitch = -89.0f; // Update Front, Right and Up Vectors updateCameraVectors(); } } // onMouseMove() Mouse movement processor method. The interesting part is the manual reset of the mouse position that made the thing work ...
      // straight line distance between the camera and look at point, here (0,0,0) float distance = glm::length( m_target - m_position ); // Calculate the camera position using the distance and angles float camX = distance * -std::sin( glm::radians( m_yaw ) ) * std::cos( glm::radians( m_pitch) ); float camY = distance * -std::sin( glm::radians( m_pitch) ); float camZ = -distance * std::cos( glm::radians( m_yaw ) ) * std::cos( glm::radians( m_pitch) ); // Set the camera position and perspective vectors m_position = glm::vec3( camX, camY, camZ ); m_front = glm::vec3( 0.0, 0.0, 0.0 ) - m_position; m_up = m_worldUp; m_right = glm::normalize( glm::cross( m_front, m_worldUp ) ); glm::lookAt( m_position, m_front, m_up ); Orbiting camera vectors calculation in updateCameraVectors().
      Now, for my understanding, as the glfw manual explicitly states that if cursor is disabled then it is reset to the center, but my code only works if it is reset manually, i fear i am doing something wrong. It is not world moving (only if there is a world to render :-)), but somehow i am curious what i am missing.
       
      I am not a professional programmer, just a hobbyist, so it may well be that i got something principally wrong :-)
      And thanks for any hints and so ...
       
  • Advertisement
  • Popular Now

  • Forum Statistics

    • Total Topics
      631352
    • Total Posts
      2999484
×

Important Information

By using GameDev.net, you agree to our community Guidelines, Terms of Use, and Privacy Policy.

Participate in the game development conversation and more when you create an account on GameDev.net!

Sign me up!