• Announcements

    • khawk

      Download the Game Design and Indie Game Marketing Freebook   07/19/17

      GameDev.net and CRC Press have teamed up to bring a free ebook of content curated from top titles published by CRC Press. The freebook, Practices of Game Design & Indie Game Marketing, includes chapters from The Art of Game Design: A Book of Lenses, A Practical Guide to Indie Game Marketing, and An Architectural Approach to Level Design. The GameDev.net FreeBook is relevant to game designers, developers, and those interested in learning more about the challenges in game development. We know game development can be a tough discipline and business, so we picked several chapters from CRC Press titles that we thought would be of interest to you, the GameDev.net audience, in your journey to design, develop, and market your next game. The free ebook is available through CRC Press by clicking here. The Curated Books The Art of Game Design: A Book of Lenses, Second Edition, by Jesse Schell Presents 100+ sets of questions, or different lenses, for viewing a game’s design, encompassing diverse fields such as psychology, architecture, music, film, software engineering, theme park design, mathematics, anthropology, and more. Written by one of the world's top game designers, this book describes the deepest and most fundamental principles of game design, demonstrating how tactics used in board, card, and athletic games also work in video games. It provides practical instruction on creating world-class games that will be played again and again. View it here. A Practical Guide to Indie Game Marketing, by Joel Dreskin Marketing is an essential but too frequently overlooked or minimized component of the release plan for indie games. A Practical Guide to Indie Game Marketing provides you with the tools needed to build visibility and sell your indie games. With special focus on those developers with small budgets and limited staff and resources, this book is packed with tangible recommendations and techniques that you can put to use immediately. As a seasoned professional of the indie game arena, author Joel Dreskin gives you insight into practical, real-world experiences of marketing numerous successful games and also provides stories of the failures. View it here. An Architectural Approach to Level Design This is one of the first books to integrate architectural and spatial design theory with the field of level design. The book presents architectural techniques and theories for level designers to use in their own work. It connects architecture and level design in different ways that address the practical elements of how designers construct space and the experiential elements of how and why humans interact with this space. Throughout the text, readers learn skills for spatial layout, evoking emotion through gamespaces, and creating better levels through architectural theory. View it here. Learn more and download the ebook by clicking here. Did you know? GameDev.net and CRC Press also recently teamed up to bring GDNet+ Members up to a 20% discount on all CRC Press books. Learn more about this and other benefits here.
Sign in to follow this  
Followers 0
Migi0027

DX11
DX11 - Terrain Tessellation repeating

21 posts in this topic

Hi guys.

 

I've been trying to implement tessellation, and got it implemented, thanks to you.

 

My next goal is to implement terrain tessellation with displacement mapping

 

Questions: (Some I have attempted, shown in the shader code below)

  • The vertices generated on the cpu, do they just represent a plane, or a pre generated grid?
  • How do I decide the height of the displacement mapping, just a constant?
  • How are the normals generated?

My attempt: (If you want to see...)

cbuffer ConstantObjectBuffer : register (b0)
{
	matrix worldMatrix;
};

cbuffer ConstantFrameBuffer : register (b1)
{
	matrix viewMatrix;
	matrix projectionMatrix;

	float3 eyepos;
	float cppad;

	float4 lightvec;
	float4 lightcol;

	float FogStart;
	float FogEnd;
	float2 __space;

	float3 FogColor;
	float shadows;

	float SpecularIntensity;
	float3 pad3;
	float4 SpecularColor;
}


//***************************************************//
//                 VERTEX SHADER                     //
//***************************************************//

struct VOut
{
    float4 position : POSITION;
	float2 texcoord : TEXCOORD;
	float access : ACCESS;

	float tessAmount : TSSAM;
	
	float3 NormalW : NORMWORLD;
	float3 normal : NORM;
	float4 depthPosition : TEXTURE0;
};

struct GlobalIn
{
	float4 position : POSITION;
	float4 normal : NORMAL;
	float2 texcoord : TEXCOORD;
};

Texture2D t_map : register(t0);
SamplerState ss;

VOut VShader(GlobalIn input)
{
    VOut output;

    input.position.w = 1.0f;
	output.texcoord = input.texcoord;

	// Calculate the position of the vertex against the world, view, and projection matrices.
    /*output.position = mul(input.position, worldMatrix);
    output.position = mul(output.position, viewMatrix);
    output.position = mul(output.position, projectionMatrix);*/

	output.position = mul(input.position, viewMatrix);

	// Get Tesselation amount
	output.tessAmount = (1.0f / output.position.z) * 6.0f;

	output.position = input.position;

    output.NormalW = mul(float4(input.normal.xyz,0), mul(worldMatrix, viewMatrix));

	// Store the position value in a second input value for depth value calculations.
	output.depthPosition.xyz = mul(float4(input.position.xyz,1), mul(worldMatrix, viewMatrix)).xyz;

	// Per Vertex lighting
	float4 norm = normalize(input.normal);
	output.access = saturate(dot(norm, lightvec));

	output.normal = input.normal;
	
    return output;
}

//***************************************************//
//                 HULL SHADER                       //
//***************************************************//

struct HOutput
{
    float edges[3] : SV_TessFactor;
    float inside : SV_InsideTessFactor;
};

#define tessellationAmount 12.0f

HOutput ColorPatchConstantFunction(InputPatch<VOut, 3> inputPatch, uint patchId : SV_PrimitiveID)
{    
    HOutput output;

	float tA = inputPatch[0].tessAmount;
	tA = 12.0f;

    // Set the tessellation factors for the three edges of the triangle.
    output.edges[0] = tA;
    output.edges[1] = tA;
    output.edges[2] = tA;

    // Set the tessellation factor for tessallating inside the triangle.
    output.inside = tA;

    return output;
}

[domain("tri")]
[partitioning("integer")]
[outputtopology("triangle_cw")]
[outputcontrolpoints(3)]
[patchconstantfunc("ColorPatchConstantFunction")]

VOut HShader(InputPatch<VOut, 3> patch, uint pointId : SV_OutputControlPointID, uint patchId : SV_PrimitiveID)
{
    VOut output;

    // Set the x for this control point as the output x.
    output.position = patch[pointId].position;

    output.texcoord = patch[pointId].texcoord;
    output.access = patch[pointId].access;
    output.NormalW = patch[pointId].NormalW;
    output.normal = patch[pointId].normal;
    output.depthPosition = patch[pointId].depthPosition;

    return output;
}

//***************************************************//
//                 DOMAIN SHADER                     //
//***************************************************//

struct DOut
{
    float4 position : SV_Position;
	float2 texcoord : TEXCOORD;
	float access : ACCESS;
	
	float3 NormalW : NORMWORLD;
	float4 depthPosition : TEXTURE0;
};

[domain("tri")]

DOut DShader(HOutput input, float3 uvwCoord : SV_DomainLocation, const OutputPatch<VOut, 3> patch)
{
    DOut output;

	float3 vertexPosition;
    float2 texCoords;
    float3 normal;
    float4 worldPosition;

	vertexPosition = uvwCoord.x * patch[0].position + uvwCoord.y * patch[1].position + uvwCoord.z * patch[2].position;

    texCoords = uvwCoord.x * patch[0].texcoord + uvwCoord.y * patch[1].texcoord + uvwCoord.z * patch[2].texcoord;

    normal =  uvwCoord.x * float3(0, 1, 0) + uvwCoord.y * float3(0, 1, 0) + uvwCoord.z * float3(0, 1, 0);
    normal = normalize(normal);

    float vHeight = t_map.SampleLevel(ss, texCoords, 0);
    vertexPosition += float3(0, 1, 0) * (vHeight * 2.0f);

    output.position = mul(float4(vertexPosition, 1.0f), worldMatrix);
    output.position = mul(output.position, viewMatrix);
    output.position = mul(output.position, projectionMatrix);

    output.texcoord = texCoords;

    output.NormalW = mul(normal,(float3x3)worldMatrix);
    output.NormalW = normalize(output.NormalW);

    return output;
}

//***************************************************//
//                 PIXEL SHADER                      //
//***************************************************//

struct POut
{
	float4 Diffuse  : SV_Target0;
	float4 Depth    : SV_Target1;
	float4 Normals  : SV_Target2;
	float4 Lighting : SV_Target3;
};

POut PShader(VOut input)
{
	POut output;

	// Depth
	output.Depth = float4(input.depthPosition.xyz, 1.0f);

	// Normals
	output.Normals = float4(normalize(input.NormalW), 1);

	output.Diffuse = float4(1, 1, 1, 1);
	output.Lighting = float4(lightcol.rgb * input.access, 1.0f);

	output.Lighting = float4(1, 1, 1, 1);

	return output;
}

I've attempted with the pre generated grid, but this came: (The terrain is repeated over and over again, why?)

 

kcxu6f.png

 

Thank you, as always GameDev.

Edited by Migi0027
0

Share this post


Link to post
Share on other sites

Seems no one replied, so I'll try my best.

 

 

The vertices generated on the cpu, do they just represent a plane, or a pre generated grid?

Generate quad on CPU, tesellator stage will create extra triangles, which will result in your terrain.

 

 

How do I decide the height of the displacement mapping, just a constant?

If you're using UNORM or NORM texture, then you need to decide on min/max height. For example 1.0f in texture could mean 255.0f in world space.

If you're using FLOAT texture then just store height directly in the texture.

 

 

How are the normals generated?

It should be possible to calculate them based on data in displacement map, however I haven't done this, so I am unable to help more than this.

 

 

The terrain is repeated over and over again, why?

All your meshes have UV 0.0f to 1.0f, so every terrain ended up reading same texture coordinates.

You need to do do several Draw() calls and use different displacement map for each of them.

0

Share this post


Link to post
Share on other sites

Seems no one replied, so I'll try my best.

 

 

The vertices generated on the cpu, do they just represent a plane, or a pre generated grid?

Generate quad on CPU, tesellator stage will create extra triangles, which will result in your terrain.

 

 

How do I decide the height of the displacement mapping, just a constant?

If you're using UNORM or NORM texture, then you need to decide on min/max height. For example 1.0f in texture could mean 255.0f in world space.

If you're using FLOAT texture then just store height directly in the texture.

 

 

How are the normals generated?

It should be possible to calculate them based on data in displacement map, however I haven't done this, so I am unable to help more than this.

 

 

The terrain is repeated over and over again, why?

All your meshes have UV 0.0f to 1.0f, so every terrain ended up reading same texture coordinates.

You need to do do several Draw() calls and use different displacement map for each of them.

This is most likely the issue.  However, you don't need separate draw calls if you just want to stretch that single displacement map across all of your tiles.  Then you would just use 1.0 / gridsX and 1.0 / gridsY sized pieces for each grid.  Does that make sense?

1

Share this post


Link to post
Share on other sites

Well, a bit closer.

 

Right now I send a quad to the gpu, and then tessellate/displace it from there, but another problem comes, it looks like only half on the quad is being rendered:

 

ao13cm.png

 

The shader practically hasn't changed, only the buffer creation:

Plane_VI plane;

// create the vertex buffer
D3D11_BUFFER_DESC bd;
ZeroMemory(&bd, sizeof(bd));

bd.Usage = D3D11_USAGE_DYNAMIC;
bd.ByteWidth = sizeof(MESH_STRUCT::Dummy) * 4;
bd.BindFlags = D3D11_BIND_VERTEX_BUFFER;
bd.CPUAccessFlags = D3D11_CPU_ACCESS_WRITE;
	
dev->CreateBuffer(&bd, NULL, &m_vertexBuffer);

D3D11_MAPPED_SUBRESOURCE ms;
// copy the vertices into the buffer
devcon->Map(m_vertexBuffer, NULL, D3D11_MAP_WRITE_DISCARD, NULL, &ms);    // map the buffer
memcpy(ms.pData, plane.Vertices, sizeof( plane.Vertices	));                 // copy the data
devcon->Unmap(m_vertexBuffer, NULL);

// create the index buffer
bd.Usage = D3D11_USAGE_DYNAMIC;
bd.ByteWidth = sizeof(DWORD) * 6;
bd.BindFlags = D3D11_BIND_INDEX_BUFFER;
bd.CPUAccessFlags = D3D11_CPU_ACCESS_WRITE;
bd.MiscFlags = 0;

dev->CreateBuffer(&bd, NULL, &m_indexBuffer);

devcon->Map(m_indexBuffer, NULL, D3D11_MAP_WRITE_DISCARD, NULL, &ms);    // map the buffer
memcpy(ms.pData, plane.Indices, sizeof(plane.Indices));                   // copy the data
devcon->Unmap(m_indexBuffer, NULL);

IndexCount = 6;
m_indexCount = 6;
m_vertexCount = 4;

Definition of Plane_VI:

----HEADER-----
class BASEAPI Plane_VI
{
public:MESH_STRUCT Vertices[4];
public:DWORD Indices[6];

public:
	Plane_VI();
};

----SOURCE-----
Plane_VI::Plane_VI()
{
	Vertices[0] = MESH_STRUCT(-1.0f, 0.0f, -1.0f, D3DXVECTOR3(0.0f, 1.0f, 0.0f), 0.0f, 1.0f, 0, 0, 0);
	Vertices[1] = MESH_STRUCT(1.0f, 0.0f, -1.0f, D3DXVECTOR3(0.0f, 1.0f, 0.0f), 1.0f, 1.0f, 0, 0, 0);
	Vertices[2] = MESH_STRUCT(-1.0f, 0.0f, 1.0f, D3DXVECTOR3(0.0f, 1.0f, 0.0f), 0.0f, 0.0f, 0, 0, 0);
	Vertices[3] = MESH_STRUCT(1.0f, 0.0f, 1.0f, D3DXVECTOR3(0.0f, 1.0f, 0.0f), 1.0f, 0.0f, 0, 0, 0);

	Indices[0] = 3;
	Indices[1] = 1;
	Indices[2] = 2;
	Indices[3] = 2;
	Indices[4] = 1;
	Indices[5] = 0;
};

The primitive topology I'm using (Could this be part of the problem?):

devcon->IASetPrimitiveTopology(D3D11_PRIMITIVE_TOPOLOGY_3_CONTROL_POINT_PATCHLIST); // devcon -> Device Context

Now what have I done wrong? happy.png  

0

Share this post


Link to post
Share on other sites
I already suggested a pass-through geometry shader for inspecting values in PIX. If you can't use PIX or something, visualizing manually helps as an alternative. Currently I suspect something wrong with the tex-coords. Pass them along and output them in the pixel-shader as colors ([tt]return float4(texcoord.xy, 0, 1);[/tt]). You should see some red-green-yellow color gradient.

Or bind the displacement map to your pixel shader instead and sample (and output) there, to see if the sampling is the culprit (solid instead of wireframe and without displacement).

Also, show your domain shader.
0

Share this post


Link to post
Share on other sites

PS. The domain shader is at the top of this page, in the shader file smile.png

 

Though I am going to do as suggested, I'm pretty sure that the UV's are fine, as I've used them before, but I might be wrong.

 

Something I forgot to add:

class BASEAPI MESH_STRUCT {
public: 
	FLOAT X, Y, Z; D3DXVECTOR3 Normal; FLOAT U, V; FLOAT tx; FLOAT ty; FLOAT tz; float accessability; D3DXVECTOR4 bWeight; // XYZ:Position, UV: Texture, txtytz: Tangent
//... Not nessesary
};

This should tell you the UV coords.

0

Share this post


Link to post
Share on other sites

Hmmm, tangents, accessability and weights ? Don't see them in your vertex shader input at all. Also: make sure your input layout is ok.

0

Share this post


Link to post
Share on other sites

About that, some of the are used, some are not, but the input layout is correct, and in the correct order, but if you want to see:

 

D3D11_INPUT_ELEMENT_DESC ied[] =
{
{"POSITION", 0, DXGI_FORMAT_R32G32B32_FLOAT, 0, D3D11_APPEND_ALIGNED_ELEMENT, D3D11_INPUT_PER_VERTEX_DATA, 0},
{"NORMAL", 0, DXGI_FORMAT_R32G32B32_FLOAT, 0, D3D11_APPEND_ALIGNED_ELEMENT, D3D11_INPUT_PER_VERTEX_DATA, 0},
{"TEXCOORD", 0, DXGI_FORMAT_R32G32_FLOAT, 0, D3D11_APPEND_ALIGNED_ELEMENT, D3D11_INPUT_PER_VERTEX_DATA, 0},
};

if (dev->CreateInputLayout(ied, 3, VS->GetBufferPointer(), VS->GetBufferSize(), &pLayout) != S_OK)
...
0

Share this post


Link to post
Share on other sites
Yeah, looks fine (though I for one wouldn't use a float4 for the normal in the shader). I assume the stride when binding the buffer is ok, too.

Try the other approaches.

You wouldn't mind posting that displacement texture, please ?
0

Share this post


Link to post
Share on other sites

Well, that white grid was confusing from the start. There should be no white at all, so I assume this is a different draw call (and shader). I don't see that grid in PIX either.

 

For the tesselated one: I miss the red color. And the displacement should go in one direction only (normal is always the same). How does the PreVS tab look ?

0

Share this post


Link to post
Share on other sites

Looks fine.

 

Hmmm, if I try to compile that shader using an effect I get A LOT of warnings about missing output values. The compilation even fails since there are these inconsistencies between shader stages (e.g. your domain shader outputs DOut, your pixelshader wants VOut).

 

I'm surprised that something gets drawn at all. Don't you get any warnings from the debug layer ?

 

Anyway, remove those compiler warnings and make sure the input-output signatures match.

0

Share this post


Link to post
Share on other sites

What warnings do you get when you compile it?

 

I think the signatures are better now:

cbuffer ConstantObjectBuffer : register (b0)
{
	matrix worldMatrix;
};

cbuffer ConstantFrameBuffer : register (b1)
{
	matrix viewMatrix;
	matrix projectionMatrix;

	float3 eyepos;
	float cppad;

	float4 lightvec;
	float4 lightcol;

	float FogStart;
	float FogEnd;
	float2 __space;

	float3 FogColor;
	float shadows;

	float SpecularIntensity;
	float3 pad3;
	float4 SpecularColor;
}


//***************************************************//
//                 VERTEX SHADER                     //
//***************************************************//

struct VOut
{
    float4 position : POSITION;
	float2 texcoord : TEXCOORD;
	float access : ACCESS;

	float tessAmount : TSSAM;
	
	float3 NormalW : NORMWORLD;
	float3 normal : NORM;
	float4 depthPosition : TEXTURE0;
};

struct GlobalIn
{
	float4 position : POSITION;
	float4 normal : NORMAL;
	float2 texcoord : TEXCOORD;
};

Texture2D t_map : register(t0);
SamplerState ss;

VOut VShader(GlobalIn input)
{
    VOut output;

    input.position.w = 1.0f;
	output.texcoord = input.texcoord;

	// Calculate the position of the vertex against the world, view, and projection matrices.
    /*output.position = mul(input.position, worldMatrix);
    output.position = mul(output.position, viewMatrix);
    output.position = mul(output.position, projectionMatrix);*/

	output.position = mul(input.position, viewMatrix);

	// Get Tesselation amount
	output.tessAmount = (1.0f / output.position.z) * 6.0f;

	output.position = input.position;

    output.NormalW = mul(float4(input.normal.xyz,0), mul(worldMatrix, viewMatrix));

	// Store the position value in a second input value for depth value calculations.
	output.depthPosition.xyz = mul(float4(input.position.xyz,1), mul(worldMatrix, viewMatrix)).xyz;

	// Per Vertex lighting
	float4 norm = normalize(input.normal);
	output.access = saturate(dot(norm, lightvec));

	output.normal = input.normal;
	
    return output;
}

//***************************************************//
//                 HULL SHADER                       //
//***************************************************//

struct HOutput
{
    float edges[3] : SV_TessFactor;
    float inside : SV_InsideTessFactor;
};

HOutput ColorPatchConstantFunction(InputPatch<VOut, 3> inputPatch, uint patchId : SV_PrimitiveID)
{    
    HOutput output;

	float tA = inputPatch[0].tessAmount;
	tA = 36.0f;

    // Set the tessellation factors for the three edges of the triangle.
    output.edges[0] = tA;
    output.edges[1] = tA;
    output.edges[2] = tA;

    // Set the tessellation factor for tessallating inside the triangle.
    output.inside = tA;

    return output;
}

[domain("tri")]
[partitioning("integer")]
[outputtopology("triangle_cw")]
[outputcontrolpoints(3)]
[patchconstantfunc("ColorPatchConstantFunction")]

VOut HShader(InputPatch<VOut, 3> patch, uint pointId : SV_OutputControlPointID, uint patchId : SV_PrimitiveID)
{
    VOut output;

    // Set the x for this control point as the output x.
    output.position = patch[pointId].position;

    output.texcoord = patch[pointId].texcoord;
    output.access = patch[pointId].access;
    output.NormalW = patch[pointId].NormalW;
    output.normal = patch[pointId].normal;
    output.depthPosition = patch[pointId].depthPosition;

    return output;
}

//***************************************************//
//                 DOMAIN SHADER                     //
//***************************************************//

struct DOut
{
    float4 position : SV_Position;
	float2 texcoord : TEXCOORD;
	float access : ACCESS;
	
	float3 NormalW : NORMWORLD;
	float4 depthPosition : TEXTURE0;
};

[domain("tri")]

DOut DShader(HOutput input, float3 uvwCoord : SV_DomainLocation, const OutputPatch<VOut, 3> patch)
{
    DOut output;

	float3 vertexPosition;
    float2 texCoords;
    float3 normal;
    float4 worldPosition;

	vertexPosition = uvwCoord.x * patch[0].position + uvwCoord.y * patch[1].position + uvwCoord.z * patch[2].position;

    texCoords = uvwCoord.x * patch[0].texcoord + uvwCoord.y * patch[1].texcoord + uvwCoord.z * patch[2].texcoord;

    normal =  uvwCoord.x * float3(0, 1, 0) + uvwCoord.y * float3(0, 1, 0) + uvwCoord.z * float3(0, 1, 0);
    normal = normalize(normal);

    float vHeight = t_map.SampleLevel(ss, texCoords, 0);
    vertexPosition += float3(0, 1, 0) * (vHeight * 2.0f);

    output.position = mul(float4(vertexPosition, 1.0f), worldMatrix);
    output.position = mul(output.position, viewMatrix);
    output.position = mul(output.position, projectionMatrix);

    output.texcoord = texCoords;

    output.NormalW = mul(normal,(float3x3)worldMatrix);
    output.NormalW = normalize(output.NormalW);

    return output;
}

//***************************************************//
//                 PIXEL SHADER                      //
//***************************************************//

[maxvertexcount(3)]   // produce a maximum of 3 output vertices
void GShader( triangle DOut input[3], inout TriangleStream<DOut> triStream )
{
  DOut psInput;
  
  for( uint i = 0; i < 3; i++ )
  {
    psInput.position = input[i].position;
    psInput.texcoord = input[i].texcoord;
    psInput.access = input[i].access;
    psInput.NormalW = input[i].NormalW;
    psInput.depthPosition = input[i].depthPosition;

    triStream.Append(psInput);
  }

  triStream.RestartStrip();
}

//***************************************************//
//                 PIXEL SHADER                      //
//***************************************************//

struct POut
{
	float4 Diffuse  : SV_Target0;
	float4 Depth    : SV_Target1;
	float4 Normals  : SV_Target2;
	float4 Lighting : SV_Target3;
};

POut PShader(DOut input)
{
	POut output;

	// Depth
	output.Depth = float4(input.depthPosition.xyz, 1.0f);

	// Normals
	output.Normals = float4(normalize(input.NormalW), 1);

	output.Diffuse = float4(t_map.Sample(ss, input.texcoord).rgb, 1);
	output.Lighting = float4(lightcol.rgb * input.access, 1.0f);

	output.Lighting = float4(1, 1, 1, 1);

	return output;
}

The only warning I get are the: implicit truncation of vector type

0

Share this post


Link to post
Share on other sites

Whoops, enabled debug creation flag, got various errors, fixed them all but one:

D3D11: ERROR: ID3D11DeviceContext::DrawIndexed: Vertex Shader - Hull Shader linkage error: Stages are incompatible with each other. Semantic 'TEXTURE' is always read by the downstream shader, but never written by the upstream shader (even though the semantic is present in its output signature). [ EXECUTION ERROR #347: DEVICE_SHADER_LINKAGE_NEVERWRITTEN_ALWAYSREADS ]

Shader:

cbuffer ConstantObjectBuffer : register (b0)
{
	matrix worldMatrix;
};

cbuffer ConstantFrameBuffer : register (b1)
{
	matrix viewMatrix;
	matrix projectionMatrix;

	float3 eyepos;
	float cppad;

	float4 lightvec;
	float4 lightcol;

	float FogStart;
	float FogEnd;
	float2 __space;

	float3 FogColor;
	float shadows;

	float SpecularIntensity;
	float3 pad3;
	float4 SpecularColor;
}


//***************************************************//
//                 VERTEX SHADER                     //
//***************************************************//

struct VOut
{
    float4 position : POSITION;
	float2 texcoord : TEXCOORD;
	float access : ACCESS;

	float tessAmount : TSSAM;
	
	float3 NormalW : NORMWORLD;
	float3 normal : NORM;
	float4 depthPosition : TEXTURE0;
};

struct GlobalIn
{
	float4 position : POSITION;
	float4 normal : NORMAL;
	float2 texcoord : TEXCOORD;
};

Texture2D t_map : register(t0);
SamplerState ss;

VOut VShader(GlobalIn input)
{
    VOut output;

    input.position.w = 1.0f;
	output.texcoord = input.texcoord;

	// Calculate the position of the vertex against the world, view, and projection matrices.
    /*output.position = mul(input.position, worldMatrix);
    output.position = mul(output.position, viewMatrix);
    output.position = mul(output.position, projectionMatrix);*/

	output.position = mul(input.position, viewMatrix);

	// Get Tesselation amount
	output.tessAmount = (1.0f / output.position.z) * 6.0f;

	output.position = input.position;

    output.NormalW = mul(float4(input.normal.xyz,0), mul(worldMatrix, viewMatrix));

	// Store the position value in a second input value for depth value calculations.
	output.depthPosition.xyz = mul(float4(input.position.xyz,1), mul(worldMatrix, viewMatrix)).xyz;

	// Per Vertex lighting
	float4 norm = normalize(input.normal);
	output.access = saturate(dot(norm, lightvec));

	output.normal = input.normal;
	
    return output;
}

//***************************************************//
//                 HULL SHADER                       //
//***************************************************//

struct HOutput
{
    float edges[3] : SV_TessFactor;
    float inside : SV_InsideTessFactor;
};

HOutput ColorPatchConstantFunction(InputPatch<VOut, 3> inputPatch, uint patchId : SV_PrimitiveID)
{    
    HOutput output;

	float tA = inputPatch[0].tessAmount;
	tA = 36.0f;

    // Set the tessellation factors for the three edges of the triangle.
    output.edges[0] = tA;
    output.edges[1] = tA;
    output.edges[2] = tA;

    // Set the tessellation factor for tessallating inside the triangle.
    output.inside = tA;

    return output;
}

[domain("tri")]
[partitioning("integer")]
[outputtopology("triangle_cw")]
[outputcontrolpoints(3)]
[patchconstantfunc("ColorPatchConstantFunction")]

VOut HShader(InputPatch<VOut, 3> patch, uint pointId : SV_OutputControlPointID, uint patchId : SV_PrimitiveID)
{
    VOut output;

    // Set the x for this control point as the output x.
    output.position =      patch[pointId].position;
    output.texcoord =      patch[pointId].texcoord;
    output.depthPosition = patch[pointId].depthPosition;
    output.access =        patch[pointId].access;
    output.tessAmount =    patch[pointId].tessAmount;
    output.NormalW =       patch[pointId].NormalW;
    output.normal =        patch[pointId].normal;

    return output;
}

//***************************************************//
//                 DOMAIN SHADER                     //
//***************************************************//

struct DOut
{
    float4 position : SV_Position;
	float2 texcoord : TEXCOORD;
	float access : ACCESS;

	float tessAmount : TSSAM;
	
	float3 NormalW : NORMWORLD;
	float4 depthPosition : TEXTURE0;
};

[domain("tri")]

DOut DShader(HOutput input, float3 uvwCoord : SV_DomainLocation, const OutputPatch<VOut, 3> patch)
{
    DOut output;

	float3 vertexPosition;
    float2 texCoords;
    float3 normal;
    float4 worldPosition;

	output.access = patch[0].access;
	output.texcoord = patch[0].texcoord;
	output.depthPosition = patch[0].depthPosition;

	vertexPosition = uvwCoord.x * patch[0].position + uvwCoord.y * patch[1].position + uvwCoord.z * patch[2].position;

    texCoords = uvwCoord.x * patch[0].texcoord + uvwCoord.y * patch[1].texcoord + uvwCoord.z * patch[2].texcoord;

    normal =  uvwCoord.x * float3(0, 1, 0) + uvwCoord.y * float3(0, 1, 0) + uvwCoord.z * float3(0, 1, 0);
    normal = normalize(normal);

    float vHeight = t_map.SampleLevel(ss, texCoords, 0);
    vertexPosition += float3(0, 1, 0) * (vHeight * 2.0f);

    output.position = mul(float4(vertexPosition, 1.0f), worldMatrix);
    output.position = mul(output.position, viewMatrix);
    output.position = mul(output.position, projectionMatrix);

    output.texcoord = texCoords;

    output.NormalW = mul(normal,(float3x3)worldMatrix);
    output.NormalW = normalize(output.NormalW);

	output.tessAmount = patch[0].tessAmount;

    return output;
}

//***************************************************//
//                 PIXEL SHADER                      //
//***************************************************//

[maxvertexcount(3)]   // produce a maximum of 3 output vertices
void GShader( triangle DOut input[3], inout TriangleStream<DOut> triStream )
{
  DOut psInput;
  
  for( uint i = 0; i < 3; i++ )
  {
    psInput.position = input[i].position;
    psInput.texcoord = input[i].texcoord;
    psInput.access = input[i].access;
    psInput.access = input[i].access;
    psInput.NormalW = input[i].NormalW;
    psInput.depthPosition = input[i].depthPosition;
    psInput.tessAmount = input[i].tessAmount;

    triStream.Append(psInput);
  }

  triStream.RestartStrip();
}

//***************************************************//
//                 PIXEL SHADER                      //
//***************************************************//

struct POut
{
	float4 Diffuse  : SV_Target0;
	float4 Depth    : SV_Target1;
	float4 Normals  : SV_Target2;
	float4 Lighting : SV_Target3;
};

POut PShader(DOut input)
{
	POut output;

	// Depth
	output.Depth = float4(input.depthPosition.xyz, 1.0f);

	// Normals
	output.Normals = float4(normalize(input.NormalW), 1);

	output.Diffuse = float4(t_map.Sample(ss, input.texcoord).rgb, 1);
	output.Lighting = float4(lightcol.rgb * input.access, 1.0f);

	output.Lighting = float4(1, 1, 1, 1);

	return output;
}

Which I can't seem to solve :(

0

Share this post


Link to post
Share on other sites
You should get warnings (apart from the truncation) even if you compile the shaders in isolation, at least I do:
 
[tt]migi.fx(52,6): warning X3578: Output value 'VShader' is not completely initialized[/tt]
 
The linkage error also tells you which one is the culprit (semantic [tt]TEXTURE[/tt]), i.e. VOut.depthPosition (you don't write to w, only to xyz).
 
I think you should find the other ones, since your shader actually works when corrected wink.png
 
5d9b57269064730.jpg

(I used a different scale and higher tesselation, though)

Cheers. Edited by unbird
0

Share this post


Link to post
Share on other sites

The shader, if I forgot something:

cbuffer ConstantObjectBuffer : register (b0)
{
	matrix worldMatrix;
};

cbuffer ConstantFrameBuffer : register (b1)
{
	matrix viewMatrix;
	matrix projectionMatrix;

	float3 eyepos;
	float cppad;

	float4 lightvec;
	float4 lightcol;

	float FogStart;
	float FogEnd;
	float2 __space;

	float3 FogColor;
	float shadows;

	float SpecularIntensity;
	float3 pad3;
	float4 SpecularColor;
}


//***************************************************//
//                 VERTEX SHADER                     //
//***************************************************//

struct VOut
{
    float4 position : POSITION;
	float2 texcoord : TEXCOORD;
	float access : ACCESS;

	float tessAmount : TSSAM;
	
	float3 NormalW : NORMWORLD;
	float3 normal : NORM;
	float4 depthPosition : TEXTURE0;
};

struct GlobalIn
{
	float4 position : POSITION;
	float4 normal : NORMAL;
	float2 texcoord : TEXCOORD;
};

Texture2D t_map : register(t0);
SamplerState ss;

VOut VShader(GlobalIn input)
{
    VOut output;

    input.position.w = 1.0f;
	output.texcoord = input.texcoord;

	// Calculate the position of the vertex against the world, view, and projection matrices.
    /*output.position = mul(input.position, worldMatrix);
    output.position = mul(output.position, viewMatrix);
    output.position = mul(output.position, projectionMatrix);*/

	output.position = mul(input.position, viewMatrix);

	// Get Tesselation amount
	output.tessAmount = (1.0f / output.position.z) * 6.0f;

	output.position = input.position;

    output.NormalW = mul(float4(input.normal.xyz,0), mul(worldMatrix, viewMatrix));

	// Store the position value in a second input value for depth value calculations.
	output.depthPosition.xyz = mul(float4(input.position.xyz,1), mul(worldMatrix, viewMatrix)).xyz;
	output.depthPosition.w = 1.0f;

	// Per Vertex lighting
	float4 norm = normalize(input.normal);
	output.access = saturate(dot(norm, lightvec));

	output.normal = input.normal;
	
    return output;
}

//***************************************************//
//                 HULL SHADER                       //
//***************************************************//

struct HOutput
{
    float edges[3] : SV_TessFactor;
    float inside : SV_InsideTessFactor;
};

HOutput ColorPatchConstantFunction(InputPatch<VOut, 3> inputPatch, uint patchId : SV_PrimitiveID)
{    
    HOutput output;

	float tA = inputPatch[0].tessAmount;
	tA = 36.0f;

    // Set the tessellation factors for the three edges of the triangle.
    output.edges[0] = tA;
    output.edges[1] = tA;
    output.edges[2] = tA;

    // Set the tessellation factor for tessallating inside the triangle.
    output.inside = tA;

    return output;
}

[domain("tri")]
[partitioning("integer")]
[outputtopology("triangle_cw")]
[outputcontrolpoints(3)]
[patchconstantfunc("ColorPatchConstantFunction")]

VOut HShader(InputPatch<VOut, 3> patch, uint pointId : SV_OutputControlPointID, uint patchId : SV_PrimitiveID)
{
    VOut output;

    // Set the x for this control point as the output x.
    output.position =      patch[pointId].position;
    output.texcoord =      patch[pointId].texcoord;
    output.depthPosition = patch[pointId].depthPosition;
    output.access =        patch[pointId].access;
    output.tessAmount =    patch[pointId].tessAmount;
    output.NormalW =       patch[pointId].NormalW;
    output.normal =        patch[pointId].normal;

    return output;
}

//***************************************************//
//                 DOMAIN SHADER                     //
//***************************************************//

struct DOut
{
    float4 position : SV_Position;
	float2 texcoord : TEXCOORD;
	float access : ACCESS;

	float tessAmount : TSSAM;
	
	float3 NormalW : NORMWORLD;
	float4 depthPosition : TEXTURE0;
};

[domain("tri")]

DOut DShader(HOutput input, float3 uvwCoord : SV_DomainLocation, const OutputPatch<VOut, 3> patch)
{
    DOut output;

	float3 vertexPosition;
    float2 texCoords;
    float3 normal;
    float4 worldPosition;

	output.access = patch[0].access;
	output.texcoord = patch[0].texcoord;
	output.depthPosition = patch[0].depthPosition;

	vertexPosition = uvwCoord.x * patch[0].position + uvwCoord.y * patch[1].position + uvwCoord.z * patch[2].position;

    texCoords = uvwCoord.x * patch[0].texcoord + uvwCoord.y * patch[1].texcoord + uvwCoord.z * patch[2].texcoord;

    normal =  uvwCoord.x * float3(0, 1, 0) + uvwCoord.y * float3(0, 1, 0) + uvwCoord.z * float3(0, 1, 0);
    normal = normalize(normal);

    float vHeight = t_map.SampleLevel(ss, texCoords, 0);
    vertexPosition += float3(0, 1, 0) * (vHeight * 2.0f);

    output.position = mul(float4(vertexPosition, 1.0f), worldMatrix);
    output.position = mul(output.position, viewMatrix);
    output.position = mul(output.position, projectionMatrix);

    output.texcoord = texCoords;

    output.NormalW = mul(normal,(float3x3)worldMatrix);
    output.NormalW = normalize(output.NormalW);

	output.tessAmount = patch[0].tessAmount;

    return output;
}

//***************************************************//
//                 PIXEL SHADER                      //
//***************************************************//

[maxvertexcount(3)]   // produce a maximum of 3 output vertices
void GShader( triangle DOut input[3], inout TriangleStream<DOut> triStream )
{
  DOut psInput;
  
  for( uint i = 0; i < 3; i++ )
  {
    psInput.position = input[i].position;
    psInput.texcoord = input[i].texcoord;
    psInput.access = input[i].access;
    psInput.access = input[i].access;
    psInput.NormalW = input[i].NormalW;
    psInput.depthPosition = input[i].depthPosition;
    psInput.tessAmount = input[i].tessAmount;

    triStream.Append(psInput);
  }

  triStream.RestartStrip();
}

//***************************************************//
//                 PIXEL SHADER                      //
//***************************************************//

struct POut
{
	float4 Diffuse  : SV_Target0;
	float4 Depth    : SV_Target1;
	float4 Normals  : SV_Target2;
	float4 Lighting : SV_Target3;
};

POut PShader(DOut input)
{
	POut output;

	// Depth
	output.Depth = float4(input.depthPosition.xyz, 1.0f);

	// Normals
	output.Normals = float4(normalize(input.NormalW), 1);

	output.Diffuse = float4(t_map.Sample(ss, input.texcoord).rgb, 1);
	output.Lighting = float4(lightcol.rgb * input.access, 1.0f);

	output.Lighting = float4(1, 1, 1, 1);

	return output;
}
0

Share this post


Link to post
Share on other sites

While testing the terrain shader after a while, the normals aren't being calculated normally, and I don't see why they shouldn't.

 

Or maybe I'm just stupid... Yeah it has to be that...

 

Terrain Shader:

cbuffer ConstantObjectBuffer : register (b0)
{
	matrix worldMatrix;
};

cbuffer ConstantFrameBuffer : register (b1)
{
	matrix viewMatrix;
	matrix projectionMatrix;

	float3 eyepos;
	float cppad;

	float4 lightvec;
	float4 lightcol;

	float FogStart;
	float FogEnd;
	float2 __space;

	float3 FogColor;
	float shadows;

	float SpecularIntensity;
	float3 pad3;
	float4 SpecularColor;
}


//***************************************************//
//                 VERTEX SHADER                     //
//***************************************************//

struct VOut
{
    float4 position : POSITION;
	float2 texcoord : TEXCOORD;
	float access : ACCESS;

	float tessAmount : TSSAM;
	
	float3 NormalW : NORMWORLD;
	float3 normal : NORM;
	float4 depthPosition : TEXTURE0;
};

struct GlobalIn
{
	float4 position : POSITION;
	float4 normal : NORMAL;
	float2 texcoord : TEXCOORD;
};

Texture2D t_map : register(t0);
Texture2D t_slope_flat  : register(t1);
Texture2D t_slope_slope : register(t2);
Texture2D t_slope_steep : register(t3);
SamplerState ss;

VOut VShader(GlobalIn input)
{
    VOut output;

    input.position.w = 1.0f;
	output.texcoord = input.texcoord;

	// Calculate the position of the vertex against the world, view, and projection matrices.
    /*output.position = mul(input.position, worldMatrix);
    output.position = mul(output.position, viewMatrix);
    output.position = mul(output.position, projectionMatrix);*/

	output.position = mul(input.position, viewMatrix);

	// Get Tesselation amount
	output.tessAmount = (1.0f/length(output.position + eyepos)) * 512 + 16.0f;

	output.position = input.position;

    output.NormalW = mul(float4(input.normal.xyz,0), mul(worldMatrix, viewMatrix));

	// Store the position value in a second input value for depth value calculations.
	output.depthPosition.xyz = mul(float4(input.position.xyz,1), mul(worldMatrix, viewMatrix)).xyz;
	output.depthPosition.w = 1.0f;

	// Per Vertex lighting
	float4 norm = normalize(input.normal);
	output.access = saturate(dot(norm, lightvec));

	output.normal = input.normal;
	
    return output;
}

//***************************************************//
//                 HULL SHADER                       //
//***************************************************//

struct HOutput
{
    float edges[3] : SV_TessFactor;
    float inside : SV_InsideTessFactor;
};

HOutput ColorPatchConstantFunction(InputPatch<VOut, 3> inputPatch, uint patchId : SV_PrimitiveID)
{    
    HOutput output;

	float tA = inputPatch[0].tessAmount;
	//tA = 36.0f;

    // Set the tessellation factors for the three edges of the triangle.
    output.edges[0] = tA;
    output.edges[1] = tA;
    output.edges[2] = tA;

    // Set the tessellation factor for tessallating inside the triangle.
    output.inside = tA;

    return output;
}

[domain("tri")]
[partitioning("integer")]
[outputtopology("triangle_cw")]
[outputcontrolpoints(3)]
[patchconstantfunc("ColorPatchConstantFunction")]

VOut HShader(InputPatch<VOut, 3> patch, uint pointId : SV_OutputControlPointID, uint patchId : SV_PrimitiveID)
{
    VOut output;

    // Set the x for this control point as the output x.
    output.position =      patch[pointId].position;
    output.texcoord =      patch[pointId].texcoord;
    output.depthPosition = patch[pointId].depthPosition;
    output.access =        patch[pointId].access;
    output.tessAmount =    patch[pointId].tessAmount;
    output.NormalW =       patch[pointId].NormalW;
    output.normal =        patch[pointId].normal;

    return output;
}

//***************************************************//
//                 DOMAIN SHADER                     //
//***************************************************//

struct DOut
{
    float4 position : SV_Position;
	float2 texcoord : TEXCOORD;
	float access : ACCESS;

	float tessAmount : TSSAM;
	
	float3 NormalW : NORMWORLD;
	float4 depthPosition : TEXTURE0;
};

[domain("tri")]

DOut DShader(HOutput input, float3 uvwCoord : SV_DomainLocation, const OutputPatch<VOut, 3> patch)
{
    DOut output;

	float3 vertexPosition;
    float2 texCoords;
    float3 normal;
    float4 worldPosition;

	output.texcoord = patch[0].texcoord;
	output.depthPosition = patch[0].depthPosition;

	vertexPosition = uvwCoord.x * patch[0].position + uvwCoord.y * patch[1].position + uvwCoord.z * patch[2].position;

    texCoords = uvwCoord.x * patch[0].texcoord + uvwCoord.y * patch[1].texcoord + uvwCoord.z * patch[2].texcoord;

    normal =  uvwCoord.x * patch[0].normal + uvwCoord.y * patch[1].normal + uvwCoord.z * patch[2].normal;
    normal = normalize(normal);

    float vHeight = t_map.SampleLevel(ss, texCoords, 0);
    vertexPosition += normal * (vHeight * 25.0f);

    output.position = mul(float4(vertexPosition, 1.0f), worldMatrix);
    output.position = mul(output.position, viewMatrix);
    output.position = mul(output.position, projectionMatrix);

    output.texcoord = texCoords;

    output.NormalW = normal;//mul(normal ,(float3x3)worldMatrix);
    output.NormalW = normalize(output.NormalW);

	output.NormalW = normal;

	output.tessAmount = patch[0].tessAmount;
	
	output.access = dot(output.NormalW, lightvec);

    return output;
}

//***************************************************//
//                 GEOMETRY SHADER                   //
//***************************************************//

[maxvertexcount(3)]   // produce a maximum of 3 output vertices
void GShader( triangle DOut input[3], inout TriangleStream<DOut> triStream )
{
  DOut psInput;
  
  for( uint i = 0; i < 3; i++ )
  {
    psInput.position = input[i].position;
    psInput.texcoord = input[i].texcoord;
    psInput.access = input[i].access;
    psInput.access = input[i].access;
    psInput.NormalW = input[i].NormalW;
    psInput.depthPosition = input[i].depthPosition;
    psInput.tessAmount = input[i].tessAmount;

    triStream.Append(psInput);
  }

  triStream.RestartStrip();
}

//***************************************************//
//                 PIXEL SHADER                      //
//***************************************************//

struct POut
{
	float4 Diffuse  : SV_Target0;
	float4 Position : SV_Target1;
	float4 Depth    : SV_Target2;
	float4 Normals  : SV_Target3;
	float4 Lighting : SV_Target4;
};

POut PShader(DOut input)
{
	POut output;

	// Depth
	output.Depth = float4(input.depthPosition.xyz, 1.0f);

	// Normals
	output.Normals = float4(normalize(input.NormalW), 1);

	output.Position = float4(1, 1, 1, 1);

	float li = saturate(dot(input.NormalW, -lightvec));

	output.Diffuse = float4(input.NormalW, 1);

	/*
	// Sample the grass color from the texture using the sampler at this texture coordinate location.
    grassColor = grassTexture.Sample(SampleType, input.tex);

    // Sample the slope color from the texture using the sampler at this texture coordinate location.
    slopeColor = slopeTexture.Sample(SampleType, input.tex);

    // Sample the rock color from the texture using the sampler at this texture coordinate location.
    rockColor = rockTexture.Sample(SampleType, input.tex);

    // Calculate the slope of this point.
    slope = 1.0f - input.normal.y;

    // Determine which texture to use based on height.
    if(slope < 0.2)
    {
        blendAmount = slope / 0.2f;
        textureColor = lerp(grassColor, slopeColor, blendAmount);
    }
	
    if((slope < 0.7) && (slope >= 0.2f))
    {
        blendAmount = (slope - 0.2f) * (1.0f / (0.7f - 0.2f));
        textureColor = lerp(slopeColor, rockColor, blendAmount);
    }

    if(slope >= 0.7) 
    {
        textureColor = rockColor;
    }*/
	
	output.Lighting = float4(lightcol.rgb * saturate(dot(input.NormalW, lightvec)), 1.0f);

	return output;
}
0

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now
Sign in to follow this  
Followers 0

  • Similar Content

    • By lonewolff
      Hi Guys,
      I am revisiting an old DX11 framework I was creating a while back and am scratching my head with a small issue.
      I am trying to set the pixel shader resources and am getting the following error on every loop.
      As you can see in the below code, I am clearing out the shader resources as per the documentation. (Even going overboard and doing it both sides of the main PSSet call). But I just can't get rid of the error. Which results in the render target not being drawn.
      ID3D11ShaderResourceView* srv = { 0 }; d3dContext->PSSetShaderResources(0, 1, &srv); for (std::vector<RenderTarget>::iterator it = rtVector.begin(); it != rtVector.end(); ++it) { if (it->szName == name) { //std::cout << it->srv <<"\r\n"; d3dContext->PSSetShaderResources(0, 1, &it->srv); break; } } d3dContext->PSSetShaderResources(0, 1, &srv);  
      I am storing the RT's in a vector and setting them by name. I have tested the it->srv and am retrieving a valid pointer.
      At this stage I am out of ideas.
      Any help would be greatly appreciated
       
    • By bowerbirdcn
      hi, guys, how to understand the math used in CDXUTDirectionWidget ::UpdateLightDir 
      the  following code snippet is taken from MS DXTU source code
       
        D3DXMATRIX mInvView;
          D3DXMatrixInverse( &mInvView, NULL, &m_mView );
          mInvView._41 = mInvView._42 = mInvView._43 = 0;
          D3DXMATRIX mLastRotInv;
          D3DXMatrixInverse( &mLastRotInv, NULL, &m_mRotSnapshot );
          D3DXMATRIX mRot = *m_ArcBall.GetRotationMatrix();
          m_mRotSnapshot = mRot;
          // Accumulate the delta of the arcball's rotation in view space.
          // Note that per-frame delta rotations could be problematic over long periods of time.
          m_mRot *= m_mView * mLastRotInv * mRot * mInvView;
          // Since we're accumulating delta rotations, we need to orthonormalize 
          // the matrix to prevent eventual matrix skew
          D3DXVECTOR3* pXBasis = ( D3DXVECTOR3* )&m_mRot._11;
          D3DXVECTOR3* pYBasis = ( D3DXVECTOR3* )&m_mRot._21;
          D3DXVECTOR3* pZBasis = ( D3DXVECTOR3* )&m_mRot._31;
          D3DXVec3Normalize( pXBasis, pXBasis );
          D3DXVec3Cross( pYBasis, pZBasis, pXBasis );
          D3DXVec3Normalize( pYBasis, pYBasis );
          D3DXVec3Cross( pZBasis, pXBasis, pYBasis );
       
       
      https://github.com/Microsoft/DXUT/blob/master/Optional/DXUTcamera.cpp
    • By YixunLiu
      Hi,
      I have a surface mesh and I want to use a cone to cut a hole on the surface mesh.
      Anybody know a fast method to calculate the intersected boundary of these two geometries?
       
      Thanks.
       
      YL
       
    • By hiya83
      Hi, I tried searching for this but either I failed or couldn't find anything. I know there's D11/D12 interop and there are extensions for GL/D11 (though not very efficient). I was wondering if there's any Vulkan/D11 or Vulkan/D12 interop?
      Thanks!
    • By lonewolff
      Hi Guys,
      I am just wondering if it is possible to acquire the address of the backbuffer if an API (based on DX11) only exposes the 'device' and 'context' pointers?
      Any advice would be greatly appreciated
  • Popular Now