Sign in to follow this  

OpenGL Need someone who will chat with me about OpenGL and animated skinning process

This topic is 1442 days old which is more than the 365 day threshold we allow for new replies. Please post a new topic.

If you intended to correct an error in the post then please contact us.

Recommended Posts

I have been working on this pet project rendering engine for almost 6 months. I have been trying to figure out my issue with my animated skinning process for almost 2 months.

 

I know when enough is enough and I need someone who's professionally amazing with openGL and understand animated skinning to talk with me and look over my process to see what I might be missing. 

 

I have been enjoying learning openGL and i have done this procedure before in a DirectX engine so if anyone can give me a hand in this openGL one please let me know. My issue is to big for me to write a simple question which is why I'm looking for some 1 on 1 help now.

 

I really really want to solve this soon so please anyone out there that can give me a second pair of eyes in this issue of mine?!

Share this post


Link to post
Share on other sites

Skinning is not API specific, the same concept used in DirectX can be used in OpenGL...thats just semantics. The underlying mathematics is the same regardless of the 3D API used. If you could be more specific on exactly what issues you are having, it would go a long way in getting response to your question(s).

Share this post


Link to post
Share on other sites

Well if i did the process and I'm not getting results properly. Then it defines that I'm miss understanding openGL in someeee way. Seeing as I've looked all over my code base its not like I can say "i think the issue is here" when I'm totally clueless to where my issue can be. Which is why I was looking for that 1 on 1 help in the first place

Share this post


Link to post
Share on other sites

Well, if you understand the basic fundamentals then it's pretty easy.

 

First step is to actually texture something.

 

If you can't do that - then figure it out first.

 

After that, you simply bind a different texture at different frames of rendering...

 

Animation speed can be handled a few different ways but that's more math related than simply animating.

Share this post


Link to post
Share on other sites

This topic is 1442 days old which is more than the 365 day threshold we allow for new replies. Please post a new topic.

If you intended to correct an error in the post then please contact us.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

Sign in to follow this  

  • Similar Content

    • By xhcao
      Does sync be needed to read texture content after access texture image in compute shader?
      My simple code is as below,
      glUseProgram(program.get());
      glBindImageTexture(0, texture[0], 0, GL_FALSE, 3, GL_READ_ONLY, GL_R32UI);
      glBindImageTexture(1, texture[1], 0, GL_FALSE, 4, GL_WRITE_ONLY, GL_R32UI);
      glDispatchCompute(1, 1, 1);
      // Does sync be needed here?
      glUseProgram(0);
      glBindFramebuffer(GL_READ_FRAMEBUFFER, framebuffer);
      glFramebufferTexture2D(GL_READ_FRAMEBUFFER, GL_COLOR_ATTACHMENT0,
                                     GL_TEXTURE_CUBE_MAP_POSITIVE_X + face, texture[1], 0);
      glReadPixels(0, 0, kWidth, kHeight, GL_RED_INTEGER, GL_UNSIGNED_INT, outputValues);
       
      Compute shader is very simple, imageLoad content from texture[0], and imageStore content to texture[1]. Does need to sync after dispatchCompute?
    • By Jonathan2006
      My question: is it possible to transform multiple angular velocities so that they can be reinserted as one? My research is below:
      // This works quat quaternion1 = GEQuaternionFromAngleRadians(angleRadiansVector1); quat quaternion2 = GEMultiplyQuaternions(quaternion1, GEQuaternionFromAngleRadians(angleRadiansVector2)); quat quaternion3 = GEMultiplyQuaternions(quaternion2, GEQuaternionFromAngleRadians(angleRadiansVector3)); glMultMatrixf(GEMat4FromQuaternion(quaternion3).array); // The first two work fine but not the third. Why? quat quaternion1 = GEQuaternionFromAngleRadians(angleRadiansVector1); vec3 vector1 = GETransformQuaternionAndVector(quaternion1, angularVelocity1); quat quaternion2 = GEQuaternionFromAngleRadians(angleRadiansVector2); vec3 vector2 = GETransformQuaternionAndVector(quaternion2, angularVelocity2); // This doesn't work //quat quaternion3 = GEQuaternionFromAngleRadians(angleRadiansVector3); //vec3 vector3 = GETransformQuaternionAndVector(quaternion3, angularVelocity3); vec3 angleVelocity = GEAddVectors(vector1, vector2); // Does not work: vec3 angleVelocity = GEAddVectors(vector1, GEAddVectors(vector2, vector3)); static vec3 angleRadiansVector; vec3 angularAcceleration = GESetVector(0.0, 0.0, 0.0); // Sending it through one angular velocity later in my motion engine angleVelocity = GEAddVectors(angleVelocity, GEMultiplyVectorAndScalar(angularAcceleration, timeStep)); angleRadiansVector = GEAddVectors(angleRadiansVector, GEMultiplyVectorAndScalar(angleVelocity, timeStep)); glMultMatrixf(GEMat4FromEulerAngle(angleRadiansVector).array); Also how do I combine multiple angularAcceleration variables? Is there an easier way to transform the angular values?
    • By dpadam450
      I have this code below in both my vertex and fragment shader, however when I request glGetUniformLocation("Lights[0].diffuse") or "Lights[0].attenuation", it returns -1. It will only give me a valid uniform location if I actually use the diffuse/attenuation variables in the VERTEX shader. Because I use position in the vertex shader, it always returns a valid uniform location. I've read that I can share uniforms across both vertex and fragment, but I'm confused what this is even compiling to if this is the case.
       
      #define NUM_LIGHTS 2
      struct Light
      {
          vec3 position;
          vec3 diffuse;
          float attenuation;
      };
      uniform Light Lights[NUM_LIGHTS];
       
       
    • By pr033r
      Hello,
      I have a Bachelor project on topic "Implenet 3D Boid's algorithm in OpenGL". All OpenGL issues works fine for me, all rendering etc. But when I started implement the boid's algorithm it was getting worse and worse. I read article (http://natureofcode.com/book/chapter-6-autonomous-agents/) inspirate from another code (here: https://github.com/jyanar/Boids/tree/master/src) but it still doesn't work like in tutorials and videos. For example the main problem: when I apply Cohesion (one of three main laws of boids) it makes some "cycling knot". Second, when some flock touch to another it scary change the coordination or respawn in origin (x: 0, y:0. z:0). Just some streng things. 
      I followed many tutorials, change a try everything but it isn't so smooth, without lags like in another videos. I really need your help. 
      My code (optimalizing branch): https://github.com/pr033r/BachelorProject/tree/Optimalizing
      Exe file (if you want to look) and models folder (for those who will download the sources):
      http://leteckaposta.cz/367190436
      Thanks for any help...

    • By Andrija
      I am currently trying to implement shadow mapping into my project , but although i can render my depth map to the screen and it looks okay , when i sample it with shadowCoords there is no shadow.
      Here is my light space matrix calculation
      mat4x4 lightViewMatrix; vec3 sun_pos = {SUN_OFFSET * the_sun->direction[0], SUN_OFFSET * the_sun->direction[1], SUN_OFFSET * the_sun->direction[2]}; mat4x4_look_at(lightViewMatrix,sun_pos,player->pos,up); mat4x4_mul(lightSpaceMatrix,lightProjMatrix,lightViewMatrix); I will tweak the values for the size and frustum of the shadow map, but for now i just want to draw shadows around the player position
      the_sun->direction is a normalized vector so i multiply it by a constant to get the position.
      player->pos is the camera position in world space
      the light projection matrix is calculated like this:
      mat4x4_ortho(lightProjMatrix,-SHADOW_FAR,SHADOW_FAR,-SHADOW_FAR,SHADOW_FAR,NEAR,SHADOW_FAR); Shadow vertex shader:
      uniform mat4 light_space_matrix; void main() { gl_Position = light_space_matrix * transfMatrix * vec4(position, 1.0f); } Shadow fragment shader:
      out float fragDepth; void main() { fragDepth = gl_FragCoord.z; } I am using deferred rendering so i have all my world positions in the g_positions buffer
      My shadow calculation in the deferred fragment shader:
      float get_shadow_fac(vec4 light_space_pos) { vec3 shadow_coords = light_space_pos.xyz / light_space_pos.w; shadow_coords = shadow_coords * 0.5 + 0.5; float closest_depth = texture(shadow_map, shadow_coords.xy).r; float current_depth = shadow_coords.z; float shadow_fac = 1.0; if(closest_depth < current_depth) shadow_fac = 0.5; return shadow_fac; } I call the function like this:
      get_shadow_fac(light_space_matrix * vec4(position,1.0)); Where position is the value i got from sampling the g_position buffer
      Here is my depth texture (i know it will produce low quality shadows but i just want to get it working for now):
      sorry because of the compression , the black smudges are trees ... https://i.stack.imgur.com/T43aK.jpg
      EDIT: Depth texture attachment:
      glTexImage2D(GL_TEXTURE_2D, 0,GL_DEPTH_COMPONENT24,fbo->width,fbo->height,0,GL_DEPTH_COMPONENT,GL_FLOAT,NULL); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MAG_FILTER, GL_LINEAR); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER, GL_LINEAR); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_WRAP_S, GL_CLAMP_TO_EDGE); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_WRAP_T, GL_CLAMP_TO_EDGE); glFramebufferTexture2D(GL_FRAMEBUFFER, GL_DEPTH_ATTACHMENT, GL_TEXTURE_2D, fbo->depthTexture, 0);
  • Popular Now