CircleOfLight97

Programmer C++/3d seeks game project

Recommended Posts

Hi guys,

I would like to contribute to a game project as a developer (open source possibly). I have some experiences in C/C++ in game development (perso projects). I don't know either unreal or unity but I have some knowledges in opengl, glsl and shading theory as I had some courses at university regarding to that. I have some knowledges in maths and basic in physics. I know a little how to use blender to do modelling, texturing and simple game assets (no characters, no animation no skinning/rigging). I have no game preferences but I like aventure game, dungeon crawler, platformers, randomly generated things. I know these kind of projects involve a lot of time and I'd be really to work on it but if there are no cleary defined specific design goals/stories/gameplay mechanics I would like to not be part of it x) and I would rather prefer a smaller but well defined project to work on that a huge and not 'finishable' one.

CircleOfLight97

Share this post


Link to post
Share on other sites

Eh, maybe Naev? That game badly needs a conversion from pre-rendered ship sprites to use of actual 3-D ship models (it's running into an issue where nothing can be added because of a lack of memory). Trouble is it's actually quite a huge project, but there's no reason you should be bound to stick to a project until the end just because you contributed to it for a bit to get experience. You could very well just add ship model use, for example, and then consider yourself done with it.

I would suggest just contributing to a game you like. All the games on the Libre Game Wiki can be contributed to one way or another (even if the development is dead, you can just start your own new fork of it), so if you find something there you like, you're golden.

Share this post


Link to post
Share on other sites

You would be than welcome to work on Simutrans-Extended, which is an open source C++ game, being a fork from the original Simutrans. It is a transport simulation game with a focus on economic realism. See here for a list of current projects, here for a list of high level design goals and here for the Github page.

Here are some screenshots:

facebook-cover.png

 

gnr-7ft-single-and-1870s-4wheel-carriage

 

tram-wires-demonstration-2.png

 

Do let me know if you are interested, and I can help you to get started. Alternatively, if you have any questions about Simutrans-Extended, I will endeavour to answer them.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Forum Statistics

    • Total Topics
      628284
    • Total Posts
      2981831
  • Similar Content

    • By reders
      Hi, everyone!
      I "finished" building my first game. Obviously Pong.
      It's written in C++ on Visual Studio with SFML.
      Pong.cpp
      What do you think? What should I consider doing to improve the code?
      Thank you very much.
       
      EDIT: added some screenshot and .zip file of the playable game
       
      Pong.zip


    • By noodleBowl
      I was wondering if anyone could explain the depth buffer and the depth stencil state comparison function to me as I'm a little confused
      So I have set up a depth stencil state where the DepthFunc is set to D3D11_COMPARISON_LESS, but what am I actually comparing here? What is actually written to the buffer, the pixel that should show up in the front?
      I have these 2 quad faces, a Red Face and a Blue Face. The Blue Face is further away from the Viewer with a Z index value of -100.0f. Where the Red Face is close to the Viewer with a Z index value of 0.0f.
      When DepthFunc is set to D3D11_COMPARISON_LESS the Red Face shows up in front of the Blue Face like it should based on the Z index values. BUT if I change the DepthFunc to D3D11_COMPARISON_LESS_EQUAL the Blue Face shows in front of the Red Face. Which does not make sense to me, I would think that when the function is set to D3D11_COMPARISON_LESS_EQUAL the Red Face would still show up in front of the Blue Face as the Z index for the Red Face is still closer to the viewer
      Am I thinking of this comparison function all wrong?
      Vertex data just in case
      //Vertex date that make up the 2 faces Vertex verts[] = { //Red face Vertex(Vector4(0.0f, 0.0f, 0.0f), Color(1.0f, 0.0f, 0.0f)), Vertex(Vector4(100.0f, 100.0f, 0.0f), Color(1.0f, 0.0f, 0.0f)), Vertex(Vector4(100.0f, 0.0f, 0.0f), Color(1.0f, 0.0f, 0.0f)), Vertex(Vector4(0.0f, 0.0f, 0.0f), Color(1.0f, 0.0f, 0.0f)), Vertex(Vector4(0.0f, 100.0f, 0.0f), Color(1.0f, 0.0f, 0.0f)), Vertex(Vector4(100.0f, 100.0f, 0.0f), Color(1.0f, 0.0f, 0.0f)), //Blue face Vertex(Vector4(0.0f, 0.0f, -100.0f), Color(0.0f, 0.0f, 1.0f)), Vertex(Vector4(100.0f, 100.0f, -100.0f), Color(0.0f, 0.0f, 1.0f)), Vertex(Vector4(100.0f, 0.0f, -100.0f), Color(0.0f, 0.0f, 1.0f)), Vertex(Vector4(0.0f, 0.0f, -100.0f), Color(0.0f, 0.0f, 1.0f)), Vertex(Vector4(0.0f, 100.0f, -100.0f), Color(0.0f, 0.0f, 1.0f)), Vertex(Vector4(100.0f, 100.0f, -100.0f), Color(0.0f, 0.0f, 1.0f)), };  
    • By Rannion
      Hi,
      I'm trying to fill a win64 Console with ASCII char.
      At the moment I have 2 solutions: one using std::cout for each line, let's say 30 lines at once using std::endl at the end of each one.
      The second solution is using FillConsoleOutputCharacter. This method seems a lot more robust and with less flickering. But I'm guessing, internally it's using a different table than the one used by std::cout. I'm trying to fill the console with the unsigned char 0xB0 which is a sort of grey square when I use std::cout but when using FillConsoleOutputCharacter it is outputted as the UTF8 char '°'.
      I tried using SetConsoleOutputCP before but could not find a proper way to force it to only use the non-extended ASCII code page...
      Has anyone a hint on this one?
      Cheers!
    • By Vortez
      Hi guys, i know this is stupid but i've been trying to convert this block of asm code in c++ for an hour or two and im stuck
      ////////////////////////////////////////////////////////////////////////////////////////////// /////// This routine write the value returned by GetProcAddress() at the address p /////////// ////////////////////////////////////////////////////////////////////////////////////////////// bool SetProcAddress(HINSTANCE dll, void *p, char *name) { UINT *res = (UINT*)ptr; void *f = GetProcAddress(dll, name); if(!f) return false; _asm { push ebx push edx mov ebx, f mov edx, p mov [ebx], edx // <--- put edx at the address pointed by ebx pop edx pop ebx } return res != 0; } ... // ie: SetProcAddress(hDll, &some_function, "function_name"); I tried:
      memcmp(p, f, sizeof(p)); and UINT *i1 = (*UINT)p; UINT *i2 = (*UINT)f; *f = *p; The first one dosent seem to give the right retult, and the second one won't compile.
      Any idea?
    • By mellinoe
      Hi all,
      First time poster here, although I've been reading posts here for quite a while. This place has been invaluable for learning graphics programming -- thanks for a great resource!
      Right now, I'm working on a graphics abstraction layer for .NET which supports D3D11, Vulkan, and OpenGL at the moment. I have implemented most of my planned features already, and things are working well. Some remaining features that I am planning are Compute Shaders, and some flavor of read-write shader resources. At the moment, my shaders can just get simple read-only access to a uniform (or constant) buffer, a texture, or a sampler. Unfortunately, I'm having a tough time grasping the distinctions between all of the different kinds of read-write resources that are available. In D3D alone, there seem to be 5 or 6 different kinds of resources with similar but different characteristics. On top of that, I get the impression that some of them are more or less "obsoleted" by the newer kinds, and don't have much of a place in modern code. There seem to be a few pivots:
      The data source/destination (buffer or texture) Read-write or read-only Structured or unstructured (?) Ordered vs unordered (?) These are just my observations based on a lot of MSDN and OpenGL doc reading. For my library, I'm not interested in exposing every possibility to the user -- just trying to find a good "middle-ground" that can be represented cleanly across API's which is good enough for common scenarios.
      Can anyone give a sort of "overview" of the different options, and perhaps compare/contrast the concepts between Direct3D, OpenGL, and Vulkan? I'd also be very interested in hearing how other folks have abstracted these concepts in their libraries.
  • Popular Now