single sub bolt set public curr end byval inext
One night when there was a lightning storm (2 or 3 nights ago) I decided I would write an article on lightning just for fun. This is the first time I have ever tried to simulate lightning before. If there are any spelling mistakes or similar please E-Mail then to me at firstname.lastname@example.org.
1.1 About this Article
All the demo code is in Visual Basic with DirectX8. There is a demo with code and exe that you can via the attached article resource.
2.0 Getting down to work
First off, you just set up a normal Direct3D scene. I added a bit of fog to make it look like it's raining, but you don’t have to do this if you don’t want to.
Enough of that on with the fun. I use 2 classes in this method: the first you only need on ref to its name is "clsLighteningBoltMain". It's more or less just a container class for the second class called "clsLighteningBolt".
Private BoltArray as clsLighteningBoltThis is the head of are singly linked list
Public Function Get_YfromXZ(ByVal X as single, ByVal Z as single) as SingleThis function returns the height of the ground at X, Z. (Note: This function only returns 0 because our ground is flat)
Public Sub AddBolt(ByVal X as single, ByVal Y as single, _ ByVal Z as single, ByVal lColor as single)This sub adds a bolt to the list at the starting pos of X, Y, Z with the color lColor (Note: for some unknown reason color is not working; if any one finds out why please e-mail me)
Public Sub DrawBolts()This sub draws the bolt list and removes any bolts that say they can be removed.
Public iNext as clsLighteningBoltPointer to the next bolt in the list
Public Parent as clsLighteningBoltMainPointer to the container class (so we can call Get_YFromXZ)
Public Sub Init_Bolt(ByVal X as single, ByVal Y as single, _ ByVal Z as Single, iColor as Long)Sets the bolt startup values
Public Function Draw_Bolt() as BooleanDraws the bolt and returns false if it's done (e.g. hit the ground)
2.3 How the code works
This function returns the height of the ground/strike plane at position (x, z).
Public Function Get_YFromXZ(ByVal x As Single, _ ByVal z As Single) As Single Get_YFromXZ = 0 End FunctionAddBolt
This sub adds a bolt to the start of the bolt list with the specified position and color.
Public Sub AddBolt(ByVal x As Single, ByVal y As Single, _ ByVal z As Single, lColor As Long) Dim NewBolt As New clsLighteningBolt NewBolt.Init_Bolt x, y, z, lColor Set NewBolt.iNext = BoltArray Set BoltArray = NewBolt Set NewBolt.Parent = Me End SubDrawBolts
This sub draws all of the bolts in the bolt list and removes bolts that have hit the ground.
Public Sub DrawBolts() Dim Curr As clsLighteningBolt Dim Last As clsLighteningBolt Device.SetVertexShader FVF_LineVertex Set Curr = BoltArray Device.SetTexture 0, Nothing Do If Curr Is Nothing Then Exit Do If Curr.Draw_Bolt() = False Then If Not Last Is Nothing Then Set Last.iNext = Curr.iNext Set Curr = Curr.iNext Else Set BoltArray = Curr.iNext Set Curr = BoltArray End If Else Set Last = Curr Set Curr = Curr.iNext End If Loop End Sub2.3.2 clsLighteningBolt
This sub just sets the first line segment up.
Public Sub Init_Bolt(ByVal x As Single, ByVal y As Single, ByVal z As Single, ByVal iColor As Long) ReDim Lines(1) NumberLines = 1 With Lines(0) .x = x .y = y .z = z .Color = iColor End With With Lines(1) .x = x .y = y - 0.06 .z = z .Color = iColor End With End SubDrawBolt
This sub draws and adds one more vertex to the line strip and returns true if its not done yet and false if it is.
Public Function Draw_Bolt() As Boolean NumberLines = NumberLines + 1 ReDim Preserve Lines(NumberLines) With Lines(NumberLines) .x = Lines(NumberLines - 1).x + (1 - Rnd * 2) * 0.3 .y = Lines(NumberLines - 1).y - (Rnd + 0.55) .z = Lines(NumberLines - 1).z + (1 - Rnd * 2) * 0.3 .Color = Lines(0).Color End With Device.DrawPrimitiveUP D3DPT_LINESTRIP,NumberLines, Lines(0),_ Length_LineVertex Draw_Bolt = True If Lines(NumberLines).y <= Parent.Get_YFromXZ(Lines(1).x, Lines(1).z) Then If Rnd > 0.95 Then Draw_Bolt = False End If End If End Function
3.1 How it works
The way this works is really simple when you think about it. There is a list of all the bolts that this container needs to think about. You add and remove bolts from there. Here's a picture to help out with this one:
Adding a new bolt
Create a new bolt class and set its variables.
Insert the new bolt into the list right after the head.
Removing a bolt
- Set 1.iNext = 2.iNext
- Set 2.iNext = Nothing
- Set 2 = Nothing
- Resize the Vertex array so you can fit one more vertex in it
- Set the X to X(index-1) + 1-(rnd * 2) * 0.3 and same for the z coordint
- Set y to Y(index-1) - (rnd + .55)
Device.DrawPrimitiveUP D3DPT_LINESTRIP, Ubound(Lines()), _ Lines(0),16
Well that’s all there is to it. Not hard, is it?