# Spherical Scale Mapping

sphere bounding models vertex model scale interpolation cubemap preprocessing

# Abstract

This paper presents a practical approach to the interpolation between arbitrary convex polygonal models. In a preprocessing step a model's bounding sphere serves as the base for the

creation of a cubic scale map. During the rendering process this map is applied to a sphere using vertex texturing. Interpolation between two different models may then be implemented as the

interpolation of the associated scale maps.

# 1. Overview

The main motivation behind the development of this technique was the search for a common solution to the problem of interpolation between arbitrary polygonal models. Arbitrary in the sense of

having different vertex and triangle-counts which do not allow the employment of typical interpolation between paired vertices of the two models in question.

The basic idea is that models have at least one thing in common: they can be enclosed by a bounding sphere. The technique builds upon this fact and uses a cubemap, which is computed in a

preprocessing step. Unlike traditional displacement mapping techniques, which use vertex texturing to offset vertices along their normals [1], the created cubemap is used to scale vertices in such a

way that the base sphere resembles the original model. Blending between two scale maps then effectively means interpolating between two models. Furthermore an algorithm is proposed which allows the

recreation of vertex normals for lighting-calculations.

# 2. Preprocessing the Model

The preprocessing step covers the creation of the scale map: First the bounding sphere of the model is determined. Around this sphere a virtual axis-aligned box - representing the cubemap –

is created: It shares the origin with the sphere and its faces have an edge-length of twice the bounding sphere radius.

At the center of each cubemap texel a ray is spawned towards the bounding sphere's center and the intersection-point with the model is determined. A scale-factor in the range of [0.0, 1.0] can

then be computed – 0.0 meaning, the vertex lies in the bounding sphere's origin; 1.0 leaving the vertex on the surface of the bounding sphere.

(1)

For each cubemap-texel { Compute texel-position and the direction towards the bounding sphere's origin. Spawn a ray and determine closest intersection point with the model. float fDist = Length of vector from bounding sphere origin to intersection point. float fLambda = fDist / fBoundingSphereRadius; // 0.0 <= fLambda <= 1.0 Store fLambda * 255 in the cubemap. }

# 3. Rendering with the Scale Map

To reconstruct the original model from the computed scale map a polygonal sphere is rendered employing a vertex shader. The suggested type of sphere is a geosphere [3] [4], which provided better

quality than a polar sphere due to a better distribution of vertices.

During the rendering process the vertex shader performs a texture-lookup into the cubemap using the vertex' normal (normal retrieved from the base-sphere) and scales the vertex' position. After

this step the vertex can be transformed into worldspace.

<span class="codekeyword">float32</span> fGetScale( <span class="codekeyword">const vector3</span> &i_vNormal, <span class="codekeyword">const float32</span> i_fInterpolation ) { <span class="codekeyword">vector4</span> vScaleA, vScaleB; SampleTexture( vScaleA, 2, i_vNormal.x, i_vNormal.y, i_vNormal.z ); SampleTexture( vScaleB, 3, i_vNormal.x, i_vNormal.y, i_vNormal.z ); <span class="codekeyword">return</span> fLerp( vScaleA.r, vScaleB.r, i_fInterpolation ); } <span class="codekeyword">void</span> Execute( <span class="codekeyword">const shaderreg</span> *i_pInput, <span class="codekeyword">vector4</span> &o_vPosition, <span class= "codekeyword">shaderreg</span> *o_pOutput ) { <span class="codekeyword">const vector3</span> &vPos = i_pInput[0]; // Get position of vertex. <span class="codekeyword">const float32</span> fInterpolation = fGetFloat( 0 ); // Get interpolation-delta. <span class="codecomment">// Determine vertex scale from the cubemap: Here we simply use the vertex position as the // vertex normal, due to the nature of the base-sphere (origin at (0,0,0)).</span> <span class="codekeyword">const vector3</span> vScaledPos = vPos * fGetScale( vPos, fInterpolation ); <span class="codecomment">// Transform the final vertex position.</span> <span class="codekeyword">const vector4</span> vFinalPos = <span class="codekeyword">vector4</span>( vScaledPos.x, vScaledPos.y, vScaledPos.z, 1 ); o_vPosition = vFinalPos * matGetMatrix( m3dsc_wvpmatrix ); }

## 3.1.Reconstructing vertex normals

Rendering the geometry itself didn't pose much of a problem, yet the reconstruction of the original model isn't finished: per vertex normal vectors are not recalculated from the cubemap.

One solution to this problem can be implemented in the preprocessing step: When determining the scale-factor for a particular vertex we could go along and also store the normal vector in the

cubemap. This would mean an additional usage of three color-channels, which would lead to a RGBA-cubemap texture (Normal scaled to [0,255] range and stored in the RGB channels; λ scaled to

[0,255] and stored in the alpha-channel), effectively resulting in an increase of the size of a factor of four.

With the advent of consumer-level hardware with support for VS-model 3.0 the reconstruction of vertex-normals can be moved to a shader with the cubemap only storing scale-factors and limited to a

single-channel texture.

The basic idea behind the algorithm is the lookup of neighbour vertex positions – a normal per three vertices is calculated using the cross-product; all normals are averaged and renormalized

to find the normal of the vertex in question.

How do we determine the scaled positions of the neighbour vertices? First we have to generate the correct points on the surface of the base-sphere. We do this by determining the spherical

coordinates for the current vertex and creating new points by offsetting these coordinates and converting back to the Cartesian system. The four created points n_{0} - n_{3}

correspond to the four directions North, East, South and West.

(3)

After having scaled these four points in the vertex shader we form vectors from the current vertex position to each neighbour position and calculate four seperate normals by applying the

cross-product to two adjacent vectors. We sum these four normals and renormalize the result to get the final vertex normal vector.

Figure 3. Choosing ε so, that a new texel is sampled for each vertex. |

(4)

How can the offset ε be determined? The ideal solution would be to sample a new scale-value for each neighbour-vertex.

(2)

Although this function can be implemented in a vertex shader it is relatively complex. A better and easier solution is to choose a fixed ε for all vertices: _{
src="http://images.gamedev.net/columns/hardcore/sphericalscalemap/image007.gif">} provided good results in the sample application for a scale-map edgelength of 128 pixels and with linear

filtering enabled.

# 4. Results

Figure 4 shows an implementation of the proposed technique using a software rasterizer: A hyrid approach of image-based lighting [6] and standard phong per-pixel lighting [7] has been implemented.

The base-sphere consists of about 2500 triangles; the cubemap has been exported from Milkshape [8] using a custom-plugin that takes care of the preprocessing step and directly outputs the grayscale

cubemap (8-bits per channel). The software rasterizer is capable of rendering the scene at an average of 14 frames per second on a Pentium IV 2,8 GHz – resolution 320x240. An implementation of

the technique on next-gen graphics hardware should run considerably faster; therefore the current software-only implementation should be seen as proof-of-concept.

# 5. Limitations

Figure 6. Detection of surface-ray intersection points. |

While the proposed technique builds a solid base for interpolation between models, it comes with limitations concerning the shape of the source models: The employment of a sphere as base-primitive

and the idea of offsetting its vertices along their normals limits this approach to convex models.

In the preprocessing step the original model's surface is scanned by casting rays through the bounding sphere's origin and calculating intersection points with the model's triangles. Although this

algorithm works for convex models, because it would detect a single intersection point per ray, it fails when being applied to concave models. Figure 6 illustrates the problem of multiple

intersection points.

Because we can only select one of these points for the calculation of the scale factor the overhang of the concave shape could not be captured. The reconstructed model would therefore not resemble

the original shape.

Another limitation associated with the presented technique is related to the representable range of surface slopes: Spheres have to be approximated with triangles, which adds a discrete nature to

the base-primitive. Because vertices can only be moved along their normal, steep geometric slopes cannot be recreated from the cubemap-data if the base-sphere is not tesselated well enough.

# 6. Conclusions

This paper presents a technique for model-encoding into cubic scale-maps and the reconstruction of the model including normals. The proposed algorithm greatly simplifies the interpolation of

closed, convex polygonal models with different amounts of triangles and vertices through blending between two scale-maps. The technique relies on capabilities available on next-gen graphics cards:

programmable vertex units with support for texture sampling (vertex-shader model 3.0). The proof-of-concept implementation was created using a software rasterizer presenting the different aspects of

the algorithms.

# References

[1] Mitchell, Jason. "Direct3D Shader Models". Presentation at GDC 2004.

[2] Stanford University Computer Graphics Laboratory. "The Stanford Bunny".

[3] Woo et al. "OpenGL Programming Guide, 2nd Edition". pp. 57 – 62. Addison-Wesley, 1997.

[4] Bourke, Paul. http://astronomy.swin.edu.au/~pbourke/modelling/sphere/

[5] Reiter, Stephan. "Muli3D". API version 0.63. http://muli3d.sourceforge.net/

[6] Bjorke, Kevin. "Image-Based Lighting". In *GPU Gems*, Addison-Wesley, 2004.

[7] Phong, Bui Toung. "Illumination for Computer Generated Pictures". Communications of the ACM, 1975.

[8] Cirgan, Mete. "Milkshape 3D". http://www.milkshape3d.com/

## 0 Comments

Note: GameDev.net moderates article comments.