Making Games For The Dreamcast Using Standard GNU Tools Part I: Getting Your Development System Ready

Published May 15, 2001 by Kevin Fowlks, posted by Myopic Rhino
Do you see issues with this article? Let us know.
Advertisement
Disclaimer: Please be aware that all information is provided as-is, and may be used at your own risk. "Sega" and "Dreamcast" are trademarks of Sega Enterprises. All information here has derived from my own experience. Nothing in this document is under any type of NDA nor does it include any information from the official dreamcast development kit.


[size="5"]Introduction

Dreamcast hacking, or tinkering as you might call it, has exploded all over the game console homebrew scene over the past few months. In reality console programming is not really that new. But most people like myself never really took part in it because it was very difficult and expensive to get started. But now the Dreamcast provides us with a relatively simple interface to get our feet wet in console programming. No more ASM-only coding or non-existant FREE libraries. We now have an easy way to program our Dreamcasts thanks to the hard work done by some very talented coders like [email="bard-dcdev@%28nospam%29allusion.net"]Dan Potter[/email], [email="marcus@idonex.se"]Marcus Comstedt[/email], Hitmen and many others.

[size="3"]What you need to do before we start

This is just a simply guide to get you started in DC programming it is by no means complete.

The goal of this series is to get experienced game programmers into DC coding. Thus it is missing all those nice hand-holding beginner's steps.


[size="5"]Getting Started

Here is a list of the hardware and software you will need in order to get started developing for your Dreamcast.
  1. Sega Dreamcast Console - $99.95 At a Major Retail Store
  2. PC to Dreamcast Serial Adaptor (Must be custom-built). Instructions to build one yourself can be found here - about $35.00-$45.00
  3. Linux or Windows PC with GCC installed and configured to cross-compile for the SH-4 processor. Instructions can be found here - FREE (Optional: you should also cross-compile GCC for the ARM processor too)
  4. Next you'll want to grab:
    1. libdream 0.6 Simply FREE Dreamcast library - FREE
    2. libc 1.1 Provides some basic functions that well need - FREE
    3. uploader.py Used to upload our program to our Dreamcast *Only for Linux*
    4. DCUploader 2.01 Windows based upload util - FREE
  5. Dreamcast Serial Slave CD - FREE Download here. Instructions for burning a CD can be found on the same page.

[size="5"]Putting Everything Together

I'm not going to kid you, setting up all this stuff can be a long process if you've never done anything like this before. So you better plan on spending at least a day working on it. Also choose your OS carefully. Cygwin under Win32 works fine but using Linux has so many other advantages. I would recommend that if you do have Linux experience then go with Linux, otherwise use Windows. Make sure you follow all the steps outlined on the above sites for creating the necessary tools e.g. Serial Cable, GCC-Cross Compiler, Serial Slave CD cross-compiler.


[size="5"]Compiling Our First Program

Once everything is setup, you can test it by compiling the Stars demo from Dan Potter's site.

Note: You will have to edit the Makefile to fit your system

Note: If you are using the uploader.py script you must keep Minicom open

[size="3"]Linux

Try typing [font="Courier New"][color="#000080"]make run[/color][/font] from the console in the current directory of the demo program. This will test whether you have built your cross-compiler correctly and that your system is producing SH-4 executable files in little endian format. [font="Courier New"][color="#000080"]make run[/color][/font] will also attempt to upload your srec to the Dreamcast only if you have installed uploader.py from Dan's site.

[size="3"]Win32

Try typing [font="Courier New"][color="#000080"]make srec[/color][/font] from the console in the current directory of the demo program. This will test whether you have built your cross-compiler correctly and that your system is producing SH-4 executable files in little endian format. Now you will have to use a Windows load utility to upload your srec file to your Dreamcast. DC Uploader 2.01 works great for this.

After the uploading is done you should see the stars demo on the screen.

Congratulations!!!! You're now ready to create your own real homebrew Dreamcast programs. The next part in this series will talk about using Libdream and KOS for drawing graphics on the screen.


[size="5"]Any Problems?

First you should visit www.julesdcdev.com. This is a GREAT portal site with lots of resources to get you started in DC programming. Also try http://newbie.julesdcdev.com. Also, I would advise anyone that is interested in DC programming to join the dcdev mailing list: [email="dcdev-subscribe@egroups.com"]dcdev-subscribe@egroups.com[/email]
Cancel Save
0 Likes 0 Comments

Comments

Nobody has left a comment. You can be the first!
You must log in to join the conversation.
Don't have a GameDev.net account? Sign up!
Advertisement